Stimmen - 2, Durchschnittliche Bewertung: 4.5
(
)
)
|
Anleitung Zusammenfassung
Press this button again to resume play. Search for a section within a track / file Press and hold - ?b / B? + on the player ( .bb/ BB> on remote control) for about 1 second during playback and then release at the point you want. Skip to another track / file Press - ?b / B? + on the player ( .bb/ BB> on remote control.). To skip to previous track, press briefly - ?b within 3 seconds of playing time. Press [ # ] and a number you want to move on remote control to move the files/track. Intro scan Press or press and hold INT on the player ( INT on remote control). Each files in the current selected folder ( INT) or the first 10 seconds of each tracks/files ( INT) on the disc are played. To cancel it, press the button again. Repeat Press or press and hold RPT on the player ( RPT on the remote control). The current selected tracks/files ( 1 RPT) or folder ( RPT) on the disc is played repeatedly. To cancel it, press the button again. Shuffle Press or press and hold SHF on the player ( SHF on the remote control). Each files in the current selected folder ( SHF) or all of the tracks/files ( SHF) on the disc is played randomly. Press SHF again to cancel it. CAR CD/MP3/WMA Receiver Note During random playback, if you press - ?b , you won’t go back to the previous track. MP3/WMA Track -10 / +10 (If there is no folder or one folder.) During playback press u uu/PS to go back 10 tracks, and press U UU/ // AS to go forward 10 tracks. MP3/WMA Folder UP/DOWN (If there are more than two folders.) During playback, press u uu/PS to go back to the previous folder, and press U UU/ // AS to go forward to the next folder. See information about your music MP3/WMA files often come with tags. The tag gives the Title, Artist or Album. Press DISP repeatedly during MP3/WMA/CD TEXT file playback. If there is no information, “NO TEXT” will be shown in the display window. Note • : The icon is displayed during MP3/WMA playback. • MP3/WMA Disc compatibility with this unit is limited as follows: 1. Sampling Frequency / 8 - 48kHz (MP3) 22.05 - 48kHz (WMA) 2. Bit rate / within 8 - 320kbps (include VBR) (MP3) 32 -320kbps (WMA) 3. CD-R/CD-RW file system should be “ISO 9660” 4. If you record MP3/WMA files using software which cannot create a FILE SYSTEM, for example “Direct-CD” etc., it will not be possible to playback MP3/WMA files. We recommend that you use “Easy-CD Creator” which creates an ISO9660 file system. 5. WMA decoder is supported until “Class 2A”. Customers should also note that permission is required in order to download MP3/WMA files and music from the Internet. Our company has no right to grant such permission. Permission should always be sought from the copyright owner. Troubleshooting Symptom Cause Correction Power doesn’t turn on / The unit doesn’t operate. No sound is heard / The vol- ume level will not rise. There’s audio skipping. The playback is not possi ble. The unit does not operate correctly even when the appropriate remote control buttons are pressed. Leads and connectors are not properly. The fuse is blown. Noise and other factors are causing the built-in microprocessor to operate incorrectly. Cables are not connected correctly. This unit is not firmly secured. The disc is dirty. The loaded disc is of a type this unit cannot play. Battery power is low. Confirm once more that all connections correct. Rectify the problem that caused the fuse to blow, and then replace it. Be very sure to install the correct fuse with the same rate. Turn the unit off and then on. Connect the cables correctly. Secure this unit firmly. Clean disc. Check what type the disc. Load new battery. General CD Remote CAR CD/MP3/WMA Receiver Specifications General Output Power 50W x 4CH (Max.) Power Source DC 12V Speaker impedance 4. Ground System Negative Dimensions (W x H x D) 180 x 50 x 176 mm (Without Control Panel) Net Weight 1.3 kg Tuner FM Frequency Range 87.5-107.9, 87.5-108, 65-74 or 87.5-108 MHz S/N Ratio 55 dB Distortion 0.7% Usable Sensitivity 12 dB.V AM (MW) Frequency Range 520-1720 or 522-1620 kHz S/N Ratio 50 dB Distortion 1.0% Usable Sensitivity 28 dB.V CD Frequency Response 20 Hz-20 kHz S/N Ratio 80 dB Distortion 0.12% Channel Separation (1kHz) 55 dB AUX Frequency Response 20 Hz-20 kHz S/N Ratio 80 dB Distortion 0.12 % Channel Separation (1kHz) 45 dB Max Input Level (1kHz) 1.2V (35K.) General setting information AUX (Auxiliary) ON / OFF It is possible to use auxiliary equipment with this Activate the auxiliary setting when using auxiliary equipment connected AUX (Auxiliary) 00dB / +6dB You can adjust the volume level of each source to prevent in volume when switching between sources. You can set to 0 dB or +6 dB. You may be surprised at a loud sound when you change the source from the external component to another DEMO OFF/ ON You can change the initial indication on the display to information name (function name, EQ name, etc...) while listen to a source. LED RED / GRN You can change color of the buttons. RED(red) <-> GRN(green) BE...