Stimmen - 3, Durchschnittliche Bewertung: 3.7 ( )

Hersteller: Kenwood Dateigröße: 1.56 mb Dateiname: Unterrichtssprache:

Dieses Gerät hat auch andere Anweisungen:

Car-Receiver - KDC-3024 (570.94 kb)

Car-Receiver - KDC-3024 (545.83 kb)

Volume Increasing Volume Press the [ u] button. Decreasing Volume Press the [ d] button. — 6— Attenuator Attenuator Each time the button is pressed When it’s ON, the "ATT" indicator blinks. Easy "EASY" • Each setting value is 8) . First, select the speaker type • When the System Q setting is Treble set in audio control replace Loudness Audio Control Compensating for low and high tones during Press the [LOUD] button for at least 1 second. Each time the button is pressed for at least 1 second Loudness turns ON or OFF. When it’s ON, "LOUD" indicator is ON. System Q You can recall the best sound setting preset for different types of the music. 1 Select the source to set Press the [SRC] button. 2 Select the Sound type Press the [Q] button. Each time the button is pressed the sound setting switches. Sound setting Display 1 Select the source for adjustment Press the [SRC] button. 2 Enter Audio Control mode Press the [AUD] button for at least 1 second. 3 Select the Audio item for adjustment Press the [FM] or [AM] button. Each time the button is pressed the items that can be adjusted switch as shown below. 4 Adjust the Audio item Press the [ 4] or [ . ] button. Adjustment Item Display Range Bass level "BAS" –8 — +8 Middle level "MID" –8 — +8 Treble level "TRE" –8 — +8 Balance "BAL" Left 15 — Right 15 Fader "FAD" Rear 15 — Front 15 5 Exit Audio Control mode Flat "FLAT" Press the [AUD] button. Rock "ROCK" Top 40 "TOP40" Pops "POPS" Jazz "JAZZ" — 7 — General General English Speaker Setting Fine-tuning so that the speaker type. 1 Enter Standby Press the [SRC] button. Select the "ALL OFF" display. 2 Enter Speaker Setting mode Press the [Q] button. 3 Select the Speaker type Press the [ 4] or [ . ] button. Each time the button is pressed the setting switches below. Speaker type Display OFF "SP OFF" Removing the Faceplate For the OEM speaker "SP OEM" Press the Release button. For 6 & 6x9 in. speaker "SP 6/6x9" The faceplate is unlocked, allowing you to detach it. For 5 & 4 in. speaker "SP 5/4" • The faceplate is a precision piece of equipment and can be 4 Exit Speaker Setting mode damaged by shocks or jolts. For that reason, keep the faceplate in its special storage case while detached. Press the [Q] button. • Do not expose the faceplate or its storage case to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. Reattaching the Faceplate Switching Display Switching the information displayed. Press the [CLK] button. Each time the button is pressed the display switches as shown below. In Tuner source Information Information Display Track Time Disc name* "DNPS" Disc title* "D-TITLE" Track title* "T-TITLE" Clock *: Function of the KDC-4024/KDC-4024V Theft Deterrent Faceplate The faceplate of the unit can be detached and taken helping to deter theft. 1 Align the projections on the unit with the grooves on the faceplate. Program Service name or Frequency Clock — 8— Tuner features Tuner features The faceplate is locked AM FM TEL Mute The audio system automatically When a call comes in "CALL" is displayed. The audio system pauses. Listening to the audio during a call Press the [SRC] button. The "CALL" display disappears and the audio system comes ON. When the call ends Hang up the phone. The "CALL" display disappears and the audio system comes back ON. . 4 SRC #1 - 6 MENU Band display Preset station number Frequency displayAUTO indicator ST indicator — 9— English English Tuning Auto Memory Selecting the station. 1 Select tuner source Press the [SRC] button. Select the "TUNER" display. 2 Select the band Press the [FM] or [AM] button. Each time the [FM] button is pressed it FM1, FM2, and FM3 bands. 3 Tune up or down band Press the [ 4] or [ . ] button. During reception of stereo stations the "ST" indicator is ON. Station Preset Memory Putting the station in the memory. 1 Select the band Press the [FM] or [AM] button. 2 Select the frequency to put in the memory Press the [ 4] or [ . ] button. 3 Put the frequency in the memory Press the [#1] — [#6] button for at least 2 seconds. The preset number display blinks 1 time. On each band, 1 station can be put in the memory on each [#1] — [#6] button. Putting a station with automatically. 1 Select the band for Auto Memory Press the [FM] or [AM] button. 2 Enter Menu mode Press the [MENU] button for at least "MENU" is displayed. 3 Select the Auto Memory Entry mode Press the [FM] or [AM] button. Select the "A-MEMORY" display. 4 Open Auto Memory Entry Press the [ 4] or [ . ] button for at least 2 seconds. When 6 stations that can be received are put in the memory Auto Memory Entry closes. • When the (page 20) is ON, only RDS stations are put in the memory. • When Auto Memory Entry is done in the FM2 band, the RDS stations preset in the FM1 band aren't put in the memory. Likewise, when it is done in the FM3 band, RDS stations preset in FM1 or FM2 aren't put in the memory. — 10 — Pres...

Herunterladen

Geben Sie zwei Ziffern: