Stimmen - 3, Durchschnittliche Bewertung: 3.7 ( )

Hersteller: Panasonic Dateigröße: 1.67 mb Dateiname: CQFX620U.PDF Unterrichtssprache:

When MUTE is on, “MUTE” indicator will light, and “MUTE” will blink on the display. Press [#](MUTE) again to cancel. Note: In the audio mode, the display will be back to regular operation mode with no operation for more than 5 seconds (2 seconds in the VOL mode). H 1 CQ-FX620/FR320U 7 -wi Power and Sound Controls (continued) <0nly for CQ-FX620U> 75^ S*HDB (Super High Definition Bass) (Only for CQ-FX620U) Especially for rock music, the bass-sound will be more powerful. • Press [HDB] to be able to listen to high-definition bass. Press [HDB] again to cancel Tone Enhancement (Only for CQ-FR320U) • Press [LOUD] to enhance bass and treble tones when listening at low or medium volume. • Press [LOUD] again to cancel. Audio Mode Press [SEL] to change the audio mode setting as follows. Regular Mode VOLUME BASS TREBLE -t_ BALANCE FADER 8 CQ-FX620/FR320U Bass and Treble Press [SEL] to change to the bass (or treble) mode. Press [AVOL] or [X/VOL] to increase or decrease the bass (or treble) level by 3dB. |i£j -12 to+12 pfil -12 to+12 Balance Press [SEL] to change to the balance mode. Press [AVOL] or [VVOL] to shift the sound volume to the right (R) or left (L) speakers. 3RL L c? 3RL R c? 1 to 15 Balance Center 1 to 15 Fader Press [SEL] to change to the fader mode. Press [AVOL] or [VVOL] to shift the sound volume to the front (F) or rear (R) speakers. m c 1 to 15 Fader Center 1 to 15 Note: In the audio mode (BAS/TRE/BAL/FAD), the display will be back to regular operation mode with no operation for more than 5 seconds (2 seconds in the VOL mode). CQ-FX620/FR320U 9 Power and Sound Controls (continued) n Display Controls Level Meter Press [LEVEL] to change the level meter setting as follows. Select your desired pattern. Pattern 1 I Pattern Off Pattern 2 Pattern 3 I Pattern 5 - Pattern 4 Dimmer Press and hold [LEVEL](DIMMER) for more than 2 seconds to change the dimmer level setting as follows. (Default: Brighter) Brighter Medium Darker 10 CQ-FX620/FR320U Tuner Mode Press [SOURCE] to change the operation mode setting as follows. Radio Cassette Tape Player (When a tape is inserted) CD Changer Control (When a CD changer is connected) H i.4 Band Press [BAND] to change the band setting as follows. FM1 -► FM2 -► FM3 -► AM *_:_i The stereo indicator lights during reception of an FM stereo broadcast. Manual Tuning Press [ ATUNE] or [VTUNE] to tune in a higher or lower frequency. Seek Tuning Press and hold [ATUNE] or [VTUNE] for more than 0.5 seconds, then release it. Seeking will automatically stop when a signal of the next broadcast station is received. CQ-FX620/FR320U 11 Radio Basics (continued) N Station Preset FM1, FM2, FM3 and AM can save maximum 6 stations each in their preset station memories. Caution: To ensure safety, never attempt to preset stations while you are driving. Manual Station Preset © Press [BAND] to select a desired band. (D Use manual or seek tuning to find a station which is to be preset in the memory. (D Press and hold one of the preset buttons [1] to [6] for more than 2 seconds until the display blinks once. FM I- I B0.1 Preset Number Note: You can change the memory presetting by repeating the above procedure. Auto Station Preset Select the band, press [APM] (Auto Preset Memory). • The 6 strongest available stations will be automatically saved in the memory on preset buttons [1] to [6]. • Once set, the preset stations are sequentially scanned for 5 seconds each. Tuning in a Preset Station Press the corresponding preset buttons [1] to [6] to tune in a preset station. 12 CQ-FX620/FR320U MONO/LOCAL Selection • At the MONO setting, the amount of interference heard when weak signals are received from an FM broadcast station is significantly decreased. • At the LOCAL setting, only strong signals of stations are searched in seek turning, while at the LOCAL OFF setting, relatively weak signals are also searched. © FM Broadcasts Press and hold [*]{MONO/LOC) to change the mode until the desired mode is reached, then release it. MONO OFF MONO ON MONO ON MONO OFF LOCAL OFF LOCAL OFF LOCAL ON LOCAL ON (D AM Broadcasts Press and hold [*](MONO/LOC) to switch the Local mode as follows. LOCAL OFF < »» LOCAL ON CQ-FX620/FR320U i Cassette Tape Player Basics Mode Selection Press [SOURCE] to change the operation mode setting as follows. Radio t -► Cassette Tape Player (When a tape is inserted) -► CD Changer Control (When a CD changer is connected) Loading a Tape © Press [OPEN] to open the front panel. (D Insert a cassette with the exposed tape side facing to the right. Close the front panel manually. Play will start automatically. Playing Side Indicator Caution: Do not apply a strong downward force onto the face plate and do not put anything on it while it is open, or it might be damaged. Notes: • While a cassette tape is inserted, no sound is heard (MUTE). And the volume is ba...

Herunterladen

Geben Sie zwei Ziffern: