Stimmen - , Durchschnittliche Bewertung: ( )

Anleitung Blaupunkt, modell ACAPULCO MP54 7 644 252 310

Hersteller: Blaupunkt
Dateigröße: 401.42 kb
Dateiname:

Unterrichtssprache:

Das Dokument wird geladen, bitte warten

HerunterladenSchließen

Das Dokument wird geladen, bitte warten

HerunterladenSchließen

. Press the OK button :. ENGLISH 65 CD MODE . Press the or button 7 repeatedly until “CD NAME EDIT” appears in the display. . Press the OK button :. . Press and hold down the MENU button 9. After four seconds you will hear a beep and “DELETE NAME” appears in the display. . Let go of the MENU button 9. The CD name will be deleted. . You can return to the menu by pressing the MENU button 9. Deleting all CD names You can delete all the CD names stored in the car sound system. . Listen to a CD. . Press the MENU button 9. . Press the or button 7 repeatedly until “VARIOUS MENU” appears in the display. . Press the OK button :. . Press the or button 7 repeatedly until “CD NAME EDIT” appears in the display. . Press the OK button :. . Press and hold down the MENU button 9. After four seconds you will hear a beep and “DELETE NAME” appears in the display. Continue holding the button pressed down until you hear a second beep and “DELETE ALL” appears in the display. . Let go of the MENU button 9. The CD names will be deleted. . You can return to the menu by pressing the MENU button 9. Traffic announcements in CD mode If you wish to receive traffic announcements in CD mode, . press the TRAF button =. Traffic announcement priority is active when the traffic-jam symbol lights up in the display. For further details, please read the chapter entitled “Traffic information”. Ejecting a CD . Press the button 2. The flip-release panel opens out towards you. . Press the eject button A next to the CD compartment. The CD is ejected. . Remove the CD and close the control panel. Note: . If a CD is ejected, the drive will automatically draw it back in again after 10 seconds. . You can also eject CDs whilst the device is switched off or whilst another audio source is activated. D02 D03 D04 D02 D03 D04 MP3 MODE ENGLISH MP3 mode You can also use this car sound system to play CD-Rs and CD-RWs that contain MP3 music files. MP3 is a process developed by the Fraunhofer Institute for compressing CD audio data. Compression allows data to be reduced to around 10% of their original size without a noticeable loss in quality (at a bit rate of 128 kbit/s). If a lower bit rate is used to convert CD audio data to MP3, you will be able to create smaller files but this will be accompanied by a loss in audio quality. Preparing an MP3-CD The various combinations of CD burners, CD burning software and CD blanks may lead to problems arising with the device’s ability to play certain CDs. If problems occur with your own burned CDs, you should try another brand of CD blank or choose another colour of CD blank. To avoid problems when playing CDs, you should not burn CDs at speeds greater than 16-speed. The format of the CD must be ISO 9660 Level 1 / Level 2 or Joliet. Other formats cannot be played reliably. You can create a maximum of 253 directories on a CD. You can use this device to access each of these directories. Regardless of the number of directories on the CD, the device can handle up to 65,535 MP3 files on a single CD - even if they are all stored in one directory. This device supports as many subdirectories as your burner software can create despite the fact that the maximum directory depth defined by the ISO 9660 standard is only 8. D D01 i r e c t o r i e s T001 T001 T002 T002 T r a T003 T003 T004 T004 c k s T005 T005 T006 . T001 T007 F T002 i T008 l T003 T009 e T004 s T010 T005 T011 T006 You can name each directory using a PC. The device is capable of displaying the directory name. Name the directories and tracks/files using your CD burner software. The software’s instruction manual will provide details on how to do this. 67 MP3 MODE Note: . When naming directories and tracks/files you should avoid using accents and special characters. You can use a maximum of 32 characters (including the “.MP3” file extension) for track names and directory names. If you like your files to be in the correct order, you should use burner software that places files in alphanumerical order. If your software does not provide this feature you also have the option of sorting the files manually. To do so, you should place a number (e.g. “001”, “002”, etc.) at the beginning of each file name - you must include the leading zeros. MP3 tracks can contain additional information such as the artist, album and track names (ID3 tags). This device can display ID3 tags (version 1). When creating (encoding) MP3 files from audio files, you should use bit rates up to a maximum of 256 kbits/sec. This device can only play MP3 files that have the “.MP3” file extension. Notes: To ensure uninterrupted playback, . do not try changing the file extension to “.MP3” of any files other than MP3 files and then attempt to play them! The device will ignore these invalid files during playback. . Do not use “mixed” CDs containing both non-MP3 data and MP3 tracks (the device only reads MP3 files during MP3 playback). . Do not use mix-mode CDs containing both CD-audio tracks and MP3 tracks. If you try p...