Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
The unit is now ready for use. Switching • Turn off the radio. • Press AF and > buttons simultaneously and hold down while • switching the set on again. The display shows “CODE”. • Now enter the code number to be in the car radio passport and confirm (see example under “Switching on security coding.”). Security coding is now switched off. CODE LED To indicate that your unit is equipped with security coding, the LED flashes for extra security when the car is stationary. ENGLISH 17 Radio (Radio Data System) The Radio Data convenience when More and more radio broadcast RDS information programmes. As soon as a programme has the station name including a regional if applicable, will appear in the for example, NDR1 NDS (regional programme in Lower Saxony, Germany). When RDS is activated, the station buttons become programme buttons. You now know exactly which programme you have tuned into, making it easy to find the desired station quickly. But RDS offers you further advantages: AF - Alternative frequency The AF ( Alternative Frequency) function makes sure that the strongest frequency of the currently selected programme is always tuned in automatically. This function is activated when “AF” appears in the display. In order to switch this function on or off, • press the AF button briefly. The radio will switch to mute briefly while searching for the strongest reception signal. If “SEARCH” appears in the display when switching on stored frequencies, searching for an alternative “SEARCH” will disappear when the alternative frequency found or after the frequency run through completely. If the reception quality of the selected becomes too poor: • Tune into another station. REG - regional programme Certain radio programmes are split up at times into regional programmes offering local information. The 1st programme broadcast by NDR, for example, offers programmes with different contents in the northern states of Germany Schleswig-Holstein, Hamburg and Lower Saxony at certain times of the day. If you are tuned into a regional programme and you wish to continue listening to this programme, • press the AF button for approximately 2 seconds. “REG ON” appears in the display. If you leave the service area of the regional programme tuned into, or if you would like to take advantage of the full RDS service, switch to “REG OFF”. • Press the AF button for approximately 2 seconds until “REG When active, “REG each time the Selecting a station With this car radio you can receive from 87.5 to 108 MHz. Using the buttons there are two different ways to tune into a station: Automatic tuning Prerequisite: “AF” and “m” do not light up in the display, i.e. the Alternative Frequency function and manual tuning are switched off. Use the AF and lo·m buttons (lo, m, -, lo) to adjust the respective modes. • Press ; the car radio will automatically search for the next station. When keeping the or the button depressed, seek tuning will speed up in upwards or downwards direction. Manual tuning Prerequisite: “m” lights up in the display. Toggle the lo·m button until “m” is displayed. • Press ; the frequency will change in short intervals in upwards or downwards direction. When holding or button down, frequency scan Selecting the seek You can alter the automatic seek sensitivity. For this, • press the lo·m button briefly. If “lo” is displayed, the radio will only pick strong, local stations (low sensitivity) . If “lo” does not light up, the radio will also pick up weaker, distant stations (high sensitivity) . Make sure that “m” is not indicated in the display. Switching from stereo to mono (FM) If reception is poor, you may get better sound quality by switching to mono: • Press the lo·m button until a beep sound is released and the stereo sign disappears from the display. Each time the radio is switched on, stereo playback is activated ( is displayed). The unit will automatically switch to mono if the received signal is not strong enough for stereo playback. Changing You can shift between II and T in order to store them later. The currently selected memory in the display. • Toggle the FM button until the desired memory bank lights up in the display. Storing stations On FM, you can store six stations on the preset buttons 1- 6 for each of the memory banks I, II and T. • Select the memory bank with the FM button. • Select the desired preset button (1 to 6) for the new station to be stored using preset buttons 1-6. • Tune into a station either automatically or manually by pressing or . • Press the desired preset button 1-6 until the radio resumes play after the muting and you hear the beep. Now the station has been stored. The activated preset button 1-6 is indicated in the display. Note: If you tune into corresponding memory flash in the display seconds. Automatically storing the strong-est stations with Travel-store You can automatically store the six most powerful FM stations of your current reception area sorted according to their signal strength. Thi...