Stimmen - 2, Durchschnittliche Bewertung: 3.5
(
)
)
|
Anleitung Zusammenfassung
10 Installation / Hook-up ............................ 10 Radio operation ............................ 10 Select the frequency range ................... 10 Station search ....................................... 10 Manual station search ........................... 10 Adjusting station search sensitivity ....... 10 Stereo - mono switch ............................ 10 Storing stations ..................................... 11 Storing the strongest stations automatically ......................................... 11 Recalling stored stations ....................... 11 Cassette tape operation .............. 11 Insert cassette tape ............................... 11 Remove cassette tape .......................... 11 Fast forward .......................................... 11 Care of your audio equipment ............... 12 Appendix ....................................... 12 Technical data ....................................... 12 Legend 1 On/off Turn knob. On Off Adjust volume: Turn knob. 2 Cassette tape slot 3 Fast forward Start/end fast forward: press button gently. - Eject cassette tape: Press button firmly. 4 Display for frequency range frequency memory bank channel preset stereo manual fine tuning sensitivity (station search) 5 Station selection automatic or manual Switch over by pressing lo • m 6 6 lo • m Io lit up in the display indicates normal sensitivity for the station search function. Io not lit up in the display indicates high sensitivity for the station search function. m lit up indicates manual station fine tuning. Added feature: Switch over from stereo to mono: Press lo • m for longer than 2 seconds. 7 M•L AM and long-wave (LW) switch. Press this button repeatedly if necessary. 8 1- 5 For storing and recalling radio stations 9 FM•T ( frequency modulation) Switch for the FM III and “T” ( Travelstore) - for storing recalling the six nearest, signals. Store “T”: Press FM•T until the search begins in the display. Recall “T”: Press FM•T until T appears in the display. Then press the station button quickly and repeatedly if necessary. : TONE Adjust tone. more bass more treble ENGLISH Important Traffic safety As the driver of responsibility to pay situation at all times. in a way that could distract traffic situation become particularly we would advise you not radio. Please keep in mind that you distance of 14 m per second at a speed only 50 km/h. When adjusting the volume, make sure that you are still able to hear sounds coming from outside of the vehicle, so that you are always able to react to warning signals. Installation / Hook-up If you would like to install your new car radio yourself or add other audio components to the existing ones, then please read the enclosed instructions on installation and hook-up carefully. Do not ground the loudspeaker outputs! Use only Blaupunkt-certified accessories and spare parts. Radio Select the You can choose FM 87.5 – 108 MHz, AM 531 – 1602 kHz and LW 153 – 279 kHz. • Switch on the desired frequency by pressing either the button FM•T or M•L. Switching between AM and LW: • Press M•L. Station search m should not be lit up in the display. If it is, switch it off by pressing lo • m • press right or left. The car radio will automatically tune into the next station. If you hold the button pressed, the search function will forward quickly. Manual station search m (manual) must be lit up in the display. If it is not, switch it on by pressing lo • m. • press right or left quickly. The frequency will move up or down in short intervals. If you hold the frequencies will quickly. Adjusting station search You can adjust the sensitivity of station search. • Press lo • m. When “Io” is visible in the display, then only those stations with relatively strong signals will be picked up (low sensitivity). When “Io” is not visible in the display, then stations with weaker signals will also be picked up (high sensitivity). Stereo - mono switch If you would like to switch between stereo and mono reception: • Press lo • m for approximately 2 seconds. During stereo reception the stereo symbol will light up in the display. Each time the car radio is switched on, the reception will automatically be set to stereo. The radio will automatically switch to mono when the reception conditions are poor. Storing stations For each memory store up to five stations 1-5. • For FM select the memory pressing FM•T. You can store 5 stations each frequencies. • Select the button 1-5 to store the new station and press it. • Press to tune in the station you want to store (automatically or manually). • Press the button 1-5 and hold it. First the station will be muted and then become audible again. The station has been stored in the memory bank. The corresponding memory bank and the button preset will appear in the display. Note: If you tune into a station which has already been stored, then the corresponding button preset and the memory bank will flash in the display for approximately 5 seconds. Storing the automat...