Stimmen - 3, Durchschnittliche Bewertung: 4.3 ( )

Hersteller: Audiovox Dateigröße: 1.56 mb Dateiname: ADVUV630_OM.pdf Unterrichtssprache:

NOTE: Not all wireless phones allow access to missed, received or dialed calls or address book support. 20 Bluetooth Bluetooth Disconnecting Deleting a paired wireless device: 1. Press the front panel MENU button and then press the Bluetooth icon to access the Bluetooth main menu. 2. Touch to select the phone model number you want to delete and then press the Delete button. Disconnect a Bluetooth device: To disconnect a device, press the Disconnect Phone button. The device will also be disconnected when the device is moved beyond the operational range (approximately 30 feet). When the “Auto Connect” feature is set to “On,” you can reconnect the device to the unit by placing it within the operational range. If you do not want to reconnect the device to the unit automatically, set Auto Connect” feature to “Off.” 21 Bluetooth Bluetooth Making Calls Make a call (keypad direct entry): 1. Press the front panel MENU button and then press the Bluetooth icon to access the Bluetooth main menu. 2. Pair the phone with the unit. 3. Press the Direct Entry button to view the keypad. 4. Enter a phone number and then press the button. Make a call (using lists): 1. Press the front panel MENU button and then press the Bluetooth icon to access the Bluetooth main menu. 2. Pair the phone with the unit. 3. Touch to view one of the following phone lists: Missed Calls, Received Calls, Dialed Calls or Phone Book. If you did not yet sync your phonebook, see “Bluetooth Setup Menu” on page 20 for syncing instructions. 4. Use the Up/Down buttons to navigate the list. 5. Touch to select a number. 6. Touch the number again to dial. Cancel call in progress: To cancel a call in progress, touch the Hangup button at the bottom of the screen. Transfer call in progress: To transfer a call in progress from the radio back to the mobile device, press the Transfer button at the bottom of the screen. Mute call: To mute the phone call audio from the unit when a call is received, press the Mute button. Press the Mute button again and the phone call will be restored to the unit. External Microphone: When a call is received, you can communicate with the caller using the unit’s internal microphone or an optional external microphone. An external microphone (included with the ADVUV630) will, in some instances, improve the sound quality during communication. The default setting for the unit is the internal microphone. Pressing the External Mic button will enable audio output to the optional external microphone (if connected). 22 Bluetooth Bluetooth Managing Incoming Calls Managing Incoming Calls: When connected to a Bluetooth phone, the unit will mute audio output, pause disc play, and change to the Bluetooth screen when a call is received. The incoming phone number and assigned name for that number will appear in the middle of the screen. An audible tone will sound from the unit and a graphic display will appear on the front panel. If the incoming call has no caller ID, the unit will display “Private Caller”. Answering an Incoming Call: To answer the call, press the Call button. For best reception, speak loudly and clearly toward the external microphone. To end the conversation, press the Hangup button. Rejecting an Incoming Call: Press the Hangup button to reject an incoming call. The call will revert to your wireless phone and be left for voice mail. Volume Control: To increase or decrease the volume level, turn the PWR-VOL knob on the front panel. Audio Mute: To mute the phone call audio from the unit when a call is received, press the Mute button. Press the Mute button again and the phone call will be restored to the unit. 23 Rear Camera Rear Camera Camera Function Rear Camera Function: The unit is “camera ready.” Before accessing any camera features, you must install a rear video camera. When the camera is not installed and the function is accessed by the gear selector being placed in reverse or the unit’s menu, touching the Camera icon produces no response. When the camera is installed, the rear view image of what is behind the vehicle will appear when the vehicle’s gear selector lever is placed in reverse. When the lever is removed from the reverse position, the unit will return to the previous screen. The rear camera image can be adjusted from the “Setup” menu under the “Video” submenu. The image can be changed from normal to mirror image. 24 Rear Camera Rear Camera Rear Display Function The unit allows two sources to be played simultaneously. For example, the unit’s screen can be set to the radio function while the rear passengers can watch a DVD video using an optional rear monitor. The unit provides for connection of up to two additional monitors (sold separately) for rear passengers. Perform the following to access the Rear TFT function: 1. Turn on the rear monitor. Refer to the monitor’s owner’s manual for instructions. 2. Insert the media (DVD, CD etc.) to be viewed into the unit. 3. Press the unit’s touch screen MENU button and select the Re...

Herunterladen

Geben Sie zwei Ziffern: