Stimmen - 4, Durchschnittliche Bewertung: 3.8
(
)
)
|
Anleitung Zusammenfassung
The AK-98-CDA may be required when rear mounting the CD Changer. 3. Route the CDC-FDF cable toward the factory radio. 4. Remove the factory radio from the dash panel using the factory removal tools. 5. Unplug both the power/speaker and CD Changer connectors from the rear of the radio. 6. Carefully connect the vehicle power/speaker and CD Changer connectors to the respective mating connectors on the CDC-FDF. 7. Carefully connect the power/speaker and CD Changer connectors of the CDC-FDF to the respective mating connectors at the rear of the radio. OPERATION CHECK: 1. Load CD's into the CD Changer cartridge and insert the cartridge into the changer. 2. Start vehicle and allow CD Changer to cycle. Perform a brief functional test to verify proper operation according to the owner's manual. Audiovox Corporation, 150 Marcus Blvd., Hauppauge, N.Y. 11788 Printed in China CDC-FDR Installation Diagram (Fig. 1) 6 OR 10 DISC CHANGER REAR-MOUNTED TUNER/AMPLIFIER PACK CD CHANGER DATA CONNECTOR 4i CF POWER/SPEAKER CONNECTOR VEHICLE POWER/SPEAKER CONNECTOR ANTENNA SOCKET FACTORY RADIO REARVIEW CDC-FDF Installation Diagram (Fig. 2) o POWER/SPEAKER CONNECTOR _= №■ CD CHANGER DATA CONNECTOR 8-PIN DIN CONNECTOR il Tf U= CDC-FDF eZZh VEHICLE - POWER/SPEAKER ^-y CONNECTOR \ / AK-98-CDA - (OPTIONAL) REQUIRED FOR REAR-MOUNTED CD CHANGER 20' DATA CABLE SUPPLIED WITH CD CHANGER
Car-Receiver - CDC-FDF (56.88 kb)