Stimmen - 4, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
Function • Using the cellular phone cable 99 99 0 000 202 (standard length) or 99 99 0 000 203 (long), plug the 2.5 mm plug into I on the ComSystem control surface and the 2.5 mm plug into your cellular phone headset jack. • Consult your cellular phone owners manual to set your telephone to auto-answer. This will allow you to receive calls while riding, without the need to touch / manipulate the phone to receive a call. • With intercom volume set at your normal level, adjust the volume of the phone to be received at a comfortable level. To do this, use the cellular phone volume control (you need to receive a real call to do this) before the ride begins. • Some phones may require the use of an auxiliary antenna to function properly, particularly those in the higher digital bands. Please consult your local cellular phone provider and your BMW retailer for antenna connections to your particular make and model of phone. • Most phones will operate with greater range if located outside the 10 oddments compartment. A longer cable is available PN 99 99 0 000 203 to allow placement of the phone in the optional tank utility pouch 71 60 2 342 670. • Turn the phone “on”, place the phone in the tray and close the lid. • For cellular phones equipped with voice-command dialing, your helmet headset microphone is continually connected to the cellular phone. This will enable rider or passenger to activate the voice- command dialing feature. However, note that your phone will “hear” everything said through your microphone, so it is possible to inadvertently place a call if what you say matches your voice command keyword keywordkeywordkeywordkeywordkeyword and if your phone does not require pressing a specific key to activate voice command dialing. • Once a call is received, the rider and passenger headsets will connect to the phone via a distinct VOX activated intercom channel, muting out all lower level communications (music, CB and FRS radio). Phone conversations are then shared by rider and passenger. Any audio generated from the phone or voice input will keep the intercom latched, with a 3.5 second intercom delay from the last VOX input. If a pause in conversation exceeds 3.5 seconds, lower level audio will return until new VOX input is received. • You may need to fine-tune the cell phone volume until you have established a comfortable volume level while riding. Manipulation of phone controls while riding is not recommended. Risk of injury! Do not make adjustments to ComSystem controls while driving. You may be distracted, lose control of the motorcycle and be seriously injured. Do not dial a cellular phone while driving! Utilize only voice command dialing options to place a call while riding the motorcycle, and only when a call can be placed without diverting your attention from the road. 11 Operation of (FRS) Family Channel Radio Requirement • A FRS radio such as the Kenwood FreeTalk™ (BMW PN 99 99 0 000 041) and corresponding adapter cable (BMW PN 99 99 0 000 199) are required. Several different adapter cables have been developed for the most popular FRS radios (see page 23). Please consult your BMW retailer for options prior to purchasing your FRS radio. • A push-to-talk button is required. A driver and passenger PTT button kit is available to allow either person to initiate communications on the FRS radio under BMW PN 99 99 0 000 193. Function • We recommend reading the owners manual provided with your FRS radio to take full advantage of the features and benefits of the radio. • Connect the FRS radio cable to the radio and the control surface jack I. Turn the FRS radio “on”. • The best reception will be received if the FRS radio is placed outside the oddments compartment. We recommend placing the radio on your belt / riding suit waistband or in the optional tank utility pouch 71 60 2 342 670. • With helmet cables connected and ignition turned on, (the ComSystem is active), the FRS radio is ready to be used. The FRS operates on the same level as the normal intercom and CB radio (Level 2). This allows both rider and passenger to monitor either CB, FRS or both simultaneously. • With intercom volume set at your normal level, adjust the volume of the FRS radio to be received at a comfortable level. Use the FRS radio volume control to do this (you need to receive a real transmission to do this) before the ride begins. 12 • Incoming FRS radio transmissions will activate the intercom system, mute the music (Level 1), and will be heard by rider and passenger. Rider and passenger can discuss what is being heard from the FRS or CB radio without that conversation be transmitted. If CB is also being monitored, incoming transmissions will mix with the FRS radio broadcasts, muting the music as well. • To transmit, rider or passenger must press the PTT button with (TX) toggle switch set to “FRS”. • You can only transmit on either CB or FRS, not both at the same time. Therefore, you must select which radio device you wish to transmit...
Dieses Handbuch ist für folgende Modelle:Car-Receiver - K1200 LT (498.27 kb)
Car-Receiver - K1200 LT (498.27 kb)
Car-Receiver - K1200 LT (498.27 kb)
Car-Receiver - K1200 LT (498.27 kb)