Stimmen - 4, Durchschnittliche Bewertung: 4.5
(
)
)
|
Anleitung Zusammenfassung
The “MY INFO” indicator flashes between turn-on time and turn-off time. To cancel the timer Press INFO again so that the “MY INFO” indicator disappears. To check the setting With the unit off, press INFO. The turn-on time, followed by the radio frequency and the turn-off time, appears in the display window, each for 1 second, then the unit turns off. Notes • Even if the unit is in a mode other than Radio mode, the unit switches to Radio mode and tunes in the preset radio program at the preset time automatically. When the program is over, the unit returns to the former mode automatically. • When this function is activated, TUNE i/k, A.ME/PS, LO, and the preset number buttons do not work for tuning in stations. • Even if the unit is turned off and on, or the front panel is detached and attached, this function is active until turn-off time. • Even if you are listening to a radio program with this function, pressing FUNC switches the unit to another mode. If you switch modes with FUNC, the unit does not turn off at the turn-off time of the timer. 9 ENGLISH Activating the timer 1 Insert a cassette to start playback. If a cassette is already inserted, press FUNC repeatedly to select Tape Play mode to start playback. Playback starts in the direction that the unit played back previously. 2 Adjust the volume with the Jog Dial. Press the following buttons to operate tape transport. To do this Press this buttonEject the cassette* Change the playback side and simultaneouslyFast-forward the upper side (l) of the tape Rewind the lower side (j) of the tape Rewind the upper side (l) of the tape Fast-forward the lower side (j) of the tape Stop fast transport and resume playback or lightly** * When you eject the cassette, the unit switches to the previous mode. ** Do not press or all the way. Doing so may change the direction of tape transport. CTX410(YU)-total-En-10 Auto Reverse function When the end of the tape is reached during playback or fast tape transport, the direction of the tape is automatically reversed, and playback starts on the other side. Tape direction indications Playback Fast- forward or rewind Upper side Lower side Switching modes When the unit is in a mode other than Tape Play mode, inserting a cassette switches the unit to Tape Play mode automatically. Before turning the ignition off Be sure to eject any cassette. To prevent tape problems Before inserting a cassette into the unit, make sure that there is no slack in the tape. If necessary, take up the slack by inserting a pencil through the spindle hole and winding. Tapes of 90 minutes or longer are extremely thin and easily deformed or damaged. They are not recommended. SOUND ADJUSTMENTS 1 Press PWR to turn the unit on. 2 Press SEL repeatedly to select the mode that you wish to adjust from: BASS, TRE (treble), BAL (balance), FAD (fader) and VOL (volume). Each time you press SEL, one of the following indicators appears, in cyclic order. If you do not proceed with the following step 3 within 5 seconds, the selected mode is canceled, and the indication returns to the current source mode. 3 Rotate the Jog Dial to adjust the level. Adjust each mode referring to the audio control indications in the display window. Counterclockwise Clockwise Decreases the bass level Increases the bass level Decreases the treble level Increases the treble level Decreases the level of the right speaker(s) Decreases the level of the left speaker(s) Decreases the level of the front speakers Decreases the level of the rear speakers Decreases the volume level Increases the volume level Without selecting any mode with SEL, only the volume level can be adjusted by rotating the Jog Dial. continued ENGLISH 10 CTX410(YU)-total-En-11 SOUND ADJUSTMENTS MUTE button Press this button to temporarily lower the volume. Press it again to restore the previous volume. The “MUTE” indicator in the display window flashes while the mute function is active. H-BASS (High BASS) You can enjoy music with strong bass sound. Source Level Adjuster You can adjust the output level in each mode to equalize the volume level. 1 Press PWR to turn the unit on. 2 Press FUNC repeatedly to select the desired mode. 3 Press DISP while pressing SEL. The “LA 0” indication appears. 4 Rotate the Jog Dial to adjust the level. Rotate clockwise to increase the output level. Rotate counterclockwise to decrease the output level. If you do not operate the Jog Dial within 5 seconds, this function is canceled, and the indication returns to the current source mode. 1 Press PWR to turn the unit on. 2 Press SEL repeatedly to select H-BASS (High BASS) mode. 3 Rotate Jog Dial to select on or off. Select “On” to obtain powerful bass. The “H-BASS” indicator lights up. Select “OFF” to cancel H-BASS. 11 ENGLISH CTX410(YU)-total-En-12 Returning to the factory settings Returning to the factory settings Adjusted settings of VOL, BASS, TRE, BAL, FAD, H-BASS, and source level can be returned to the factory settings with a simple operation. 1 With...