Stimmen - 5, Durchschnittliche Bewertung: 4.4
(
)
)
|
Anleitung Zusammenfassung
• Press LO to cancel Local mode and switch to DX (distance) mode. • The “ST” (stereo) indicator lights up when the tuned-in station is broadcasting in stereo and the reception is good. FUNCTION button Each time you press FUNCTION, the unit switches to one of the following modes, in cyclic order. * CD Play mode (available while a CD is in the unit) ** CD Changer Play mode (available while the optional CD changer is connected) PRESETTING STATIONS To preset stations automatically (Auto Memory) 1 Press FUNCTION repeatedly to select a desired band from among F1 (FM1), F2 (FM2), F3 (FM3), A1 (AM1) and A2 (AM2). 2 Press and hold A.ME/PS for more than 2 seconds to activate the automatic presetting function. The 6 strongest stations found will be stored in memory for preset station buttons 1 to 6 in order of their signal strength. The “A MEM” indication appears while the unit is in this mode. Use this function to automatically preset up to 6 stations each for F1, F2, F3, A1 and A2 (up to a total of 30 stations). • When the auto memory operation is completed, the preset stations are automatically tuned in for 5 seconds each in order. • To stop the auto memory operation, press A.ME/ PS again. To check the preset stations (Preset Scan) • If you wish to check the preset stations, press A.ME/PS for less than 2 seconds. The preset stations stored in memory will be tuned in for 5 seconds each in order. • To stop this function, press A.ME/PS again or press any of the preset station buttons 1 to 6. continued ENGLISH 6 PRESETTING STATIONS To preset stations manually You can manually preset stations that have not been selected by an auto memory operation. 1 Press FUNCTION repeatedly to select a desired band from among F1 (FM1), F2 (FM2), F3 (FM3), A1 (AM1) and A2 (AM2). 2 Press the desired preset station button. 1 Press FUNCTION repeatedly to select the band from among F1 (FM1), F2 (FM2), F3 (FM3), A1 (AM1) and A2 (AM2). 2 Tune in the station that you wish to preset with TUNE i or TUNE k. 3 Press and hold one of the preset station buttons 1 to 6 for approximately 2 seconds. While the station you are presetting is being registered in memory, the unit beeps. The preset station number appears to the right of the frequency indication. Preset station number Repeat these procedures to preset up to 6 stations each for F1, F2, F3, A1 and A2. • If you preset a station on a preset station button on which another station of the same band has already been preset, the previously preset station will be erased. To tune in a preset station The preset station number appears to the right of the frequency indication. Active tuning reception control (ATRC) This unit automatically suppresses FM noise caused by varying signal strength resulting from movement of the car. • The built-in automatic blending circuit mixes the left and right channel signals according to the strength of the reception. At the same time, the high-cut circuit activates to maintain sound quality. • If the reception becomes even weaker, the unit automatically switches to Monaural mode to reduce noise. 7 ENGLISH 4 Set the time you wish the unit to turn on in Radio mode. MY INFORMATION Press TUNE i, then rotate the Jog Dial to set the hour. Press TUNE k, then rotate the Jog Dial to set the minute. SWITCH You can timer-activate the radio for up to two daily radio programs. The unit turns on and off in 5 Press SELECT. Radio mode at the preset turn-on and turn-off The “BAND SEL” indication flashes. times automatically. Press SELECT again. The radio indication flashes. Band Frequency Setting the timer indication indication 6 Press FUNCTION repeatedly to select the band. 7 Tune in the station that you wish to preset with TUNE ior TUNE kor one of the preset station buttons 1 to 6. 1 With the unit off, press and hold INFO 8 Press SELECT. The “OFF TIME” indication flashes. for more than 2 seconds. Press SELECT again. The “PROGRAM1” or “PROGRAM2” The timer indication flashes. indication flashes in the display window. The number for which no program is preset flashes. 2 Press either preset station button 1 or 2 to select program 1 or 2. 3 Press SELECT. The “ON TIME” indication flashes. Press SELECT again. The timer indication flashes. 9 Set the time you wish the unit to turn off. Press TUNE i, then rotate the Jog Dial to set the hour. Press TUNE k, then rotate the Jog Dial to set the minute. 10 Press SELECT. The clock indication appears. 11 Press INFO. Your setting is stored in memory, and the unit turns off. • If you preset another program, repeat all the steps from step 1. • To cancel a timer setting in progress, press and hold PWR for more than 2 seconds. continued ENGLISH 8 MY INFORMATION SWITCH Activating the timer You can activate the timer for program 1 and/or program 2. 1 With the unit on, press INFO. The “PRG1 ON” or “PRG1 OFF” indication (the current setting for program 1) appears. 2 Press TUNE i or TUNE k repeatedly until the “PRG1 ON” indication flashes. 3 Press INFO. The “PR...