Stimmen - 4, Durchschnittliche Bewertung: 3.8
(
)
)
|
Anleitung Zusammenfassung
Title in HP Futura Book 14-20 pt., centered Subtitle in 10-14 pt., centered, white English Arabic Bahasa Portugues Hrvatski Cesky Dansk Nederland Suomi Francais Deutsch Greek Hangul Hebrew Magyar Italiano Espanol Magyar Italiano Japanese Espanol Norsk Portugues Russian Simplified Chinese Slovencina Slovenscina Espanol Svenska Traditional- Chinese Thai Turkce Ukrainian Start Here Important: Do not connect the USB cable until Step 15 or the software may not install properly. Remove all tape and cardboard Locate components Windows CD Macintosh CD User Guide print cartridges power cord and adapter control panel overlay (glossy sticker, may be pre-attached) USB cable* HP PSC 1500 All-in-One series Setup Guide * Purchased separately. The contents of your box may differ. Follow the steps in order. If you have problems during setup, see Troubleshooting at the end of this Guide. CAUTION: Make sure you remove all packing material or the device will not work properly. 2 • HP All-in-One 4 5 Attach the control panel overlay (if not attached) a Bend the bottom of the control panel overlay. CAUTION: The control panel overlay must be attached for the HP All-in-One to work! c Lift the lid. Insert the tabs of the overlay into the device. Make sure the tabs are inserted correctly before sticking the overlay to the device. d Press down on the overlay to ensure it is fi rmly attached. Do not press on the LCD area. The tabs must be in the slots. b Remove the bottom tab and the backing from the overlay. Connect the power cord and adapter Important: Do not connect the USB cable until instructed later in this guide. HP All-in-One • 3 8 9 7 6 a b c d Press the On button Open access door Remove tape from both cartridges Lower the access door until it stops. Make sure the print carriage moves to the right side. Pull the pink tab to remove the tape from both print cartridges. On CAUTION: Do not touch the copper-colored contacts or retape the cartridges. After you press the On button, the green light fl ashes, and then becomes solid. This may take up to a minute. Load plain white paper 4 • HP All-in-One 10 11 Insert the black print cartridge Insert the tri-color print cartridge a Hold the tri-color print cartridge with the blue HP logo on top. b Place the tri-color print cartridge in front of the left slot. c Push the cartridge fi rmly into the slot until it snaps into place. a Hold the black print cartridge with the blue HP logo on top. b Place the black print cartridge in front of the right slot. c Push the cartridge fi rmly into the slot until it snaps into place. d Close the access door. CAUTION: The device must be On before you can insert the print cartridge. HP All-in-One • 5 12 13 14 Align the print cartridges Turn on your computer a Turn on your computer, login if necessary, and then wait for the desktop to appear. b Close any open programs. Choose the correct CD Windows Users: Macintosh Users: a Locate the HP All-in-One Macintosh CD. b Continue to the next step. a Insert the HP All-in-One Windows CD. b Follow the onscreen instructions. a Lift the lid. Place the top of alignment page face down in the right front corner of the glass. Close the lid. b Press the Start Scan button. If the startup screen does not appear, double-click My Computer, double-click the CD-ROM icon, and then double-click setup.exe . After you insert the cartridges, a print cartridge alignment page prints. (This may take a few minutes.) After the On light stops blinking, alignment is complete. Recycle or discard the alignment page. 6 • HP All-in-One 15 Connect the USB cable Windows Users: Macintosh Users: Connect the USB cable to the port on the back of the HP All-in-One, and then to any USB port on your computer. You may have to wait several minutes before you see the onscreen prompt to connect the USB cable. Once the prompt appears, connect the USB cable to the port on the back of the HP All-in-One, and then to any USB port on your computer. If you do not see these screens, see Troubleshooting on the next page. 16 Finish software installation Follow the onscreen instructions. Complete the Sign up now screen. Congratulations! a Insert the HP All-in-One Macintosh CD. b Double-click the HP All-in-One Installer icon. c Make sure you complete all screens, including the Setup Assistant. Congratulations! Windows Users: Macintosh Users: Troubleshooting Software Problem: (Windows only) You did not see the screen telling you when to connect the USB cable. Action: Remove, and then re-insert the HP All-in-One Windows CD. Refer to Step 14. Problem: (Windows only) The Microsoft Add Hardware screen appears. Action: Click Cancel. Unplug the USB cable, and then insert the HP All-in-One Windows CD. Refer to Steps 14 and 15. Problem: (Windows only) The Device Setup Has Failed To Complete screen appears. Action: Verify that the control panel overlay is firmly attached. Unplug the device and plug it in again. Check all connections. Make sure the USB cable is plugged into the c...