Stimmen - 4, Durchschnittliche Bewertung: 3.5 ( )

Hersteller: Invacare Dateigröße: 171.2 kb Dateiname: Unterrichtssprache:

Mounting Bol. Scored Line. Tie Wra. Upper Fram. Footres. Guar. (Interior Side. Upper Fram. Support TubeTie WrapMountingHoles DO NOT use lowerframe for tie wrap. MountingBoltFootrest Guard FIGURE 1 - INSTALLING FOOTREST GUAR. INSTALLING SCISSOR MECHANISM GUARD (FIGURES 2 AND 3. NOTE: Right and left sides are determined from the user's seated position. 1. Engage wheel locks. 2. Carefully tip recliner onto the right side. Be sure there are no obstructions on or aroun. the floor before doing this. NOTE: On model 6905A chairs manufactured before 04/01/02, the side panel was secured with plasti. rivets. Replacement panel kit # 1109705 is required to install. Contact Invacare Dealer/Provider fo. more information and ordering. 3. Perform one (1) of the following. A. FOR MODEL 6905A MANUFACTURED BEFORE 04/01/2002 - remov. the seven (7) rivets securing the side panel to the recliner frame. Refer t. DETAIL .A. in FIGURE 2. B. FOR MODEL 6905A MANUFACTURED AFTER 04/01/2002 - remove th. eleven (11) bolts securing the side panel to the recliner frame. Refer to DETAI. "B. in FIGURE 2. C. FOR MODELS 6907A AND 6908A - remove four (4) bolts securing the sid. panel to the wheelchair frame. Refer to DETAIL "C" in FIGURE 2. 4. Remove four (4) existing bolts A, B, C and D from side frame as shown in FIGURE 3. 5. Position scissor mechanism guard against the side frame with the folded edge down. Refer to FIGURE 3. 6. Align holes of scissor mechanism guard with holes on side frame. 7. Secure scissor mechanism guard to side frame with existing bolts A, B, C, and D. 8. Perform one (1) of the following: A. FOR MODEL 6905A BUILT BEFORE 04/01/2002 - Install new side panel with kit no. 1109705 and using instruction sheet no. 1109704. B. FOR MODEL 6905A BUILT AFTER 04/01/2002 - Secure the side cover to the recliner frame with the eleven (11) bolts. Refer to DETAIL .B. in FIGURE 2. C. FOR MODELS 6907A, 6908A - Secure the side cover to the recliner frame with the four (4) bolts. Refer to DETAIL "C" in FIGURE 2. 3 DETAIL .A. - MODEL 6905A MANUFACTURED BEFORE 04/01/2002 Recliner Frame Rivets DETAIL .C. - REMOVING SIDE COVER MODELS 6907A AND 6908A Rivets Rivets Recliner Frame Bolts Bolts Bolts DETAIL .B. - MODEL 6905A MANUFACTURED AFTER 04/01/2002 NOTE: Side panel not shown to show rivet locations. FIGURE 2 - INSTALLING THE SCISSOR MECHANISM GUARD Bolts 9. Place chair in the upright position. 10. Close the footrest. NOTE: If binding or pinching of footrest guard occurs, call Invacare at the number listed below. 11. Carefully tip recliner onto the left side. Be sure there are no obstructions on or around th. floor before doing this. 12. Repeat STEPS 3-11 to install remaining scissor mechanism guard. REAR O. CHAI. SIDE VIE. FRONT O. CHAI. Side Fram. DO NO. remove this bol. FootrestSeat CushionScissor Mechanism Guard Bolt ABolt BBolt CBolt D NOTE: Some detail removed for clarity. FIGURE 3 - INSTALLING THE SCISSOR MECHANISM GUAR. Invacare Corporatio. US. One Invacare Wa....

Herunterladen

Geben Sie zwei Ziffern: