Stimmen - , Durchschnittliche Bewertung:
(
)
)
Hersteller: Philips
Dateigröße: 332.38 kb
Dateiname:
Unterrichtssprache:
Das Dokument wird geladen, bitte warten
 |
Das Dokument wird geladen, bitte warten
Anleitung Zusammenfassung
Clock Radio
AJ260
B
B/3
R
C
QUICK START
DC 7.5V
MISE EN SERVICE RAPIDE
INICIO RÁPIDO
R
A
3
• Press ALM1 or ALM2.
ENGLISH
Radio
Step A
1. Press RADIO ON/OFF once to switch on the
• Connect the supplied mains adapter to the set’s
radio.
2. Press AUTO SCAN/DATE to program all
7.5V DC jack and the plug into a wall outlet.
available stations.
Step B
3. Press PRESET+/- until the desired preset station
is displayed.
How to set the Clock & Alarm time
1. Press and hold TIME SET / RCC SYNC or
Weather forecast and Indoor
ALM1 / ALM2 until the time digits flash.
thermometer
2. Press and hold TUNING +/- to adjust time.
3. Press TIME SET / RCC SYNC or ALM1 /
The unit can auto detect and measure atmospheric
ALM2 to confirm.
pressure changes to graphically display the weather
4. Repeat the steps 2~3 to complete all the other
forecast in the next 12 to 24 hours, and current
time items setting.
indoor temperature.
To perform RCC (Radio Controlled Clock)
Note:
searching
– The weather forecast based on the atmospheric
Press briefly TIME SET / RCC SYNC. is
pressure may vary slightly from the actual weather
displayed.
situation.
Notes:
Using the outdoor sensor
– The RCC time search will stop 10 minutes later if no
The outdoor sensor is supplied to work with the
time signal is received.
main unit to measure and display the outdoor
– Refer to the supplied user manual for RCC
temperature.
information.
1. Place the sensor in a desired open area. The place
must be within 50 meters away from the main
Step C
unit. (Make sure that the sensor is loaded with 2
Selecting the Alarm mode
Thanks for buying Philips AJ260 clock radio.
AA batteries.)
In standby mode, slide the RADIO/BUZ to select
• For the first time using the outdoor sensor
Our Quick Start guides you through just some of the features on the set.
desired mode.
and the main unit, press RESET located on the
Please read our instruction booklet to really rise & shine!
Helpful hints:
sensor back, and RESET located in the battery
– If you have selected RADIO, make sure you have
compartment of the main unit. Then, the main
properly tuned to a station before turning off the set.
unit will begin to receive transmission from the
sensor.
3 ways to switch off the alarm
• To update the outdoor temperature from the
• Either press briefly: SLEEP/ALARM RESET or
sensor any time, press and hold
REPEAT ALARM/BRIGHTNESS CONTROL.
AJ260_37-QSG_sheet
1
6/3/07, 18:51
...