Hersteller: Philips
Dateigröße: 2 mb
Dateiname:
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Norge
Typeskilt finnes på apparatens bakside.
Important notes for users in the U.K.
Observer: Nettbryteren er sekundert
Mains plug
innkoplet. Den innebygde netdelen er der-
This apparatus is fitted with an approved 13- Amp
for ikke frakoplet nettet så lenge appa-
plug.To change a fuse in this type of plug, proceed as
ratet er tilsluttet nettkontakten.
follows:
1
Remove fuse cover and fuse.
For å redusere faren for brann eller elektrisk
2
Fix the new fuse which should be a BS1362 5-
støt, skal apparatet ikke utsettes for regn eller
Amp, A.S.T.A. or BSI approved type.
fuktighet.
3
Refit the fuse cover.
If the fitted plug is not suitable for your socket
outlets, it should be cut off and an appropriate
plug should be fitted in its place.
If the mains plug contains a fuse, it should have
a value of 5 Amp. If a plug without a fuse is
used, the fuse at the distribution board should
not be greater than 5 Amp.
Note: The severed plug must be disposed, so as to
avoid a possible shock hazard due to it being
CLASS 1
inserted into another 13-Amp socket.
LASER PRODUCT
How to connect a plug
The wires in the mains lead are colored using the fol-
lowing codes: blue = neutral (N), brown = live (L).
•
As these colors may not correspond with the
color markings identifying the terminals in your
plug, proceed as follows:
– Connect the blue wire to the terminal
marked N or colored black.
– Connect the brown wire to the terminal
marked L or colored red.
– Do not connect either wire to the earth
terminal in the plug, marked E (or e) or col-
ored green (or green and yellow).
Before replacing the plug cover, make sure that the
cord grip is clamped over the sheath of the lead and
not simply over the two wires.
Copyright in the U.K.
Recording and playback of any materials may require
consent. See Copyright Act 1956 and The
Performerb’s Protection Acts 1958 to 1972.
...