Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
The image in your smartphone appears on the screen. 4 Launch an application on your smart- phone. An image of the application appears on the screen. 5 Press the HOME button to return to the “Top Menu” screen. 122 Engb Chapter Customising preferences Displaying the information screen 1 Press the HOME button to display the “Top Menu” screen. 2 Touch . The “Information” screen appears. 3 Touch the item you want to configure. 6789a 26Customisingpreferences Checking the connections of leads Check that leads are properly connected between the navigation system and vehicle. Please also check whether they are connected in the correct positions. 1 Display the “Information” screen. = For details, refer to Displaying the information screen on page 123. 2 Touch [system settings]. The “System information menu” screen appears. 3 Touch [Connection Status]. 1 2 3 45 1 Speed Pulse The Speed Pulse value detected by the navigation system is shown. “0” is shown while the vehicle is stationary. 2 Illumination When the headlights or small lamps of a vehicle are on, “On” is displayed. When the small lamps of a vehicle are off, “Off” is displayed. (If the orange/white lead is not connected, “Off” appears.) 3 Back Signal When the gear stick is shifted to “R”, the signal switches to “High” or “Low”. (One of these is displayed depending on the vehicle.) 4 Handbrake When the handbrake is applied, “On” is displayed. When the handbrake is released, “Off” is displayed. 5 Vehicle Bus When the optional Vehicle Bus adapter is connected, “Connected” is displayed. If not connected, “–” is displayed. 6 GPS Antenna Indicates the connection status of the GPS aerial, the reception sensitivity, and from how many satellites the signal is received. 123 Engb Chapter 26 Customising preferences ColourSignalcom- municationUsedinposi- tioning Orange Yes Yes Yellow Yes No p When the GPS aerial is connected to this navigation system, “OK” is displayed. When the GPS aerial is not connected to this navigation system, “NOK” is displayed. p If reception is poor, please change the installation position of the GPS aerial. 7 Installation The installation position of the navigation system is shown. If installed correctly, “OK” appears. Indicates whether the installation position of the navigation system is correct or not. When the navigation system is installed at an extreme angle exceeding the limitation of the installing angle, “NG” will be displayed. When the angle of the navigation system has been changed, “NG” will be displayed. 8 Bluetooth 1 The name of the connected Bluetooth device, Bluetooth device address and name of the profile in use are displayed. The electric wave condition between this product and the Bluetooth device is shown in the illustration. 9 Bluetooth 2 The name of the connected Bluetooth device, Bluetooth device address and name of the profile in use are displayed. The electric wave condition between this product and the Bluetooth device is shown in the illustration. a Bluetooth 3 The name of the connected Bluetooth device, Bluetooth device address and name of the profile in use are displayed. The electric wave condition between this product and the Bluetooth device is shown in the illustration. Checking sensor learning status and driving status p The navigation system can automatically use its sensor memory based on the outer dimensions of the tyres. 1 Display the “Information” screen. = For details, refer to Displaying the information screen on page 123. 2 Touch [system settings]. The “System information menu” screen appears. 3 Touch [3D Calibration Status]. The “3D Calibration Status” screen appears. 1 5 2 6 4 3 1 Learning Indicates the current driving mode. 2 Distance Indicates driving distance. 3 Acceleration or deceleration/Rotational speed Indicates the acceleration or deceleration velocity of your vehicle. Also, the rotational speed when your vehicle turns to the left or right is shown. 4 Inclination Indicates the incline of the street that you are currently on. 5 Speed Pulse Indicates the total number of speed pulses. 6 Degree of learning Sensor learning situations for distance (Distance), right turn (Right Turn), left turn (Left Turn) and 3D detection (3D Detection) are indicated by the length of bars. 124 Engb Chapter Customising preferences 26 p When tyres have been changed or chains fitted, turning on the Speed Pulse allows the system to detect the fact that the tyre diameter has changed, and automatically replaces the value for calculating distance. p If a separately sold speed pulse generator (ND-PG1) is connected, the distance calculation value cannot be replaced automatically. Clearing status You can delete the learned results stored in “Distance”, “Speed Pulse” or “Learning”. 1 Touch [Distance] or [Speed Pulse]. The following message appears. 2 Touch [Yes]. Clears the results stored in “Distance” or “Speed Pulse”. 3 Touch [Learning]. 4 Touch [Reset all]. Clears all leaning results. p Touch [Reset all] for the following cas...
Dieses Handbuch ist für folgende Modelle:Auto GPS Navigators - AVIC-F850BT (9.61 mb)
Auto GPS Navigators - AVIC-F950BT (9.61 mb)
Auto GPS Navigators - AVIC-F950DAB (9.61 mb)