Stimmen - 3, Durchschnittliche Bewertung: 4 ( )

Hersteller: Kenwood Dateigröße: 4.95 mb Dateiname: Unterrichtssprache:

Dieses Gerät hat auch andere Anweisungen:

Auto GPS Navigators - DDX7034BT (4.9 mb)

[Enter] Press Enter the confirm the entered PIN code. Enter the PIN code specified for the Bluetooth unit you are registering. This button will not be active until at least four PIN code digits have been entered. [Cancel] Cancels registration of PIN code. [Clear] Clears the code number. . • You can also register from the Bluetooth unit side. For the PIN code necessary for registration, see (page 73). • If the error message appears even though the PIN code is correct, try . Registering Special Bluetooth Unit Registers Special Bluetooth unit, that resulted in error by normal registration method, by selecting from the listed models. 1 Display the Special Device List screen 2 Select a model name 3 Displays the Bluetooth unit name that can be registered. Confirm whether to register 4 . • Only models in Bluetooth unit name list can be registered. Go through the procedure of and complete the registration (pairing). DNX7140/DNX7000EX/DDX714/DDX7034BT Registering Bluetooth Unit PIN Code Sets the PIN code of the Bluetooth unit to enter when registering (pairing) from the cell-phone or audio player side. 1 Display the Bluetooth Setup screen Touch [ ] > [] > [Bluetooth SETUP]. (page 63) 2 Display the Receiver PIN Code screen 3 Enter PIN code 11 1 Use the keypad to enter a code number. [Cancel] Cancels registration of PIN code. [Enter] Registers the entered PIN Code. [Clear] Clears the code number. Bluetooth Unit Connection Selects the Bluetooth unit to connect. 1 Display the Bluetooth Setup screen Touch [ ] > [] > [Bluetooth SETUP]. (page 63) 2 Display the Connect Device List screen 3 Select a registered Bluetooth unit 4 Select the service to use [TEL (HFP)] Connects/disconnects cell-phone to use for Hands Free. [Audio (A2DP)] Connects/disconnects Audio player to use for Bluetooth Audio. [Remove] Deletes registration (pairing). Touching the screen displays a confirmation message. Touch [Yes]. To cancel clearing, touch [No]. English Setup Menu AV Input Setup You can set AV input parameters. 1 Display the AV-IN Setup screen Touch [ ] > [] > [AV-IN SETUP]. (page 63) 2 Set each item [AV-IN Interruption] Sets an image display of the system that is connected via the AV INPUT port. ( "OFF") "OFF": When the image source is switched, an image entered via the AV INPUT port is displayed. "ON": When an image signal is entered via the AV INPUT port, this image is displayed. [On Screen AV-IN] Sets an on-screen display of the AV-IN playback screen. ( "Auto") "Auto": Information is displayed for 5 seconds when updated. "Manual": Information is displayed when you touch on the screen. [iPod AV Interface Use] Sets the terminal to which the iPod is connected to. ( "iPod") . • This item can be set when in STANDBY source and also the iPod is unconnected. [AV-IN1 Name], [AV-IN2 Name] Sets a name to be displayed when you select a system that is connected via the AV INPUT port. ( "VIDEO") AV Interface Setup Display the AV Interface screen Touch [ ] > [ ] > [AV Interface]. (page 63) Set each item You can set audio and visual (AV) interface parameters. 1 2 [AV-OUT] Selects an AV source to be output at the AV OUTPUT port. ( "AV-IN") [R-CAM Interrupt] Sets a method to switch to the rear view camera video display. ( "OFF") "ON": Switches to the rear camera video display when "Reverse" gear is engaged. "OFF": Switches to the rear camera video display when "Reverse" gear is engaged and then pressing the [AUD] button for more than 1 second. The function of the [AUD] button needs to be set to "R-CAM" beforehand. See (page 64). [R-CAM Mirror] You can flip the left and right of the rear view camera video display. Set to "ON" and the rear view will be displayed left and right in mirror image on the screen. ( "OFF") . • When in DVD source, "AV-OUT" cannot be set to USB. When in USB source, "AV-OUT" cannot be set to DVD. DNX7140/DNX7000EX/DDX714/DDX7034BT Navigation Setup [On Screen Navigation] Sets an on-screen display of the navigation screen. ( "OFF") You can set Navigation parameters. (DDX models only) 1 2 "Auto": Information is displayed for 5 seconds when updated. Display the Navigation Setup screen Touch [ ] > [] > [Navigation]. (page 63) "OFF": Information is not displayed. Set each item [NAV Interrupt Speaker] Selects speakers used for voice guidance of the navigation system. ( "Front All") "Front L": Uses the front left side speaker for voice guidance. "Front R": Uses the front right side speaker for voice guidance. "Front All": Uses both front speakers for voice guidance. [NAV Voice Volume] Adjusts the volume for voice guidance of the navigation system. ( DNX models: "25", DDX models: "21") [Line Mute] Mutes the volume during voice guidance of the navigation system. ( "ON") When turned "ON", the volume level drops for voice guidance. [Navigation Input] Selects a navigation system connection. ( "RGB") (DDX models only) "RGB": All...

Herunterladen

Geben Sie zwei Ziffern: