Stimmen - 3, Durchschnittliche Bewertung: 3.3
(
)
)
|
Anleitung Zusammenfassung
Microsoft and Windows are registered trademarks of the Microsoft Corporation. All other trademarks mentioned herein are the property of their respective owners. Product description data reflects Fujitsu design objectives and is provided for comparative purposes; actual results may vary based on a variety of factors. Specifications are subject to change without notice. © 2003 Fujitsu. All rights reserved. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and, (2) This device must accept any interference received, including interference that may cause undesired operation. 2 Tablet Dock User’s Guide Tablet Dock User’s Guide Fujitsu Stylistic ST4000 Series Tablet Dock This guide contains information on using your Tablet Dock. You should read this section before using the dock, even if you are familiar with other computer docking devices. Your Tablet Dock may be configured in one of two ways: Configuration Tablet Dock with CD-ROM Drive Tablet Dock with Combo DVD/ CD-RW Drive Your Fujitsu Stylistic ST4000 Series Tablet Dock has the following interfaces: Port/Jack Purpose LAN (RJ45) Jack Allows you to connect a Local Area Network (LAN) device or broadband device such as a cable modem. VGA Port Allows you to connect an external monitor. Line Out Jack Allows you to connect headphones or external speakers. DC In Allows you to connect power to the system. USB Ports (Quantity 3) Allow you to connect up to three Universal Serial Bus (USB) Revision 1.1 devices or hubs. IEEE 1394 Jack Allows you to connect a peripheral such as a digital video camera. Do not expose the Tablet Dock to rain, moisture, excessive dirt or temperatures outside the Environmental Specifications as it may cause fire and shock hazards. High voltage is present inside the Tablet Dock. Do not remove the cover under any circumstances. There is a serious shock hazard. Switch the unit OFF, unplug the power cord and contact a qualified service technician or Fujitsu Services and Support if: • Liquid has been spilled on the Tablet Dock. • The Tablet Dock has been dropped. • Small objects went inside your Tablet Dock which may cause a short circuit and/or create a hazard of shock. • Fuses continue to blow out. • A distinct change in the operation and performance of the Tablet Dock occurs. • The power cord or plug is damaged or frayed. The unit should be operated only from the type of power indicated on the marked label. The socket outlet must be installed near the equipment to be accessible using the system’s AC power cord. Never connect the Tablet Dock to AC power by using an extension cord. For additional environmental specifications, see “Tablet Dock Specifications” on page 10. Always use your Tablet Dock on a solid, flat, level, clean, and dry surface. Nearby there should be electric power, as well as a telephone jack for a modem or a LAN port. Save packing material in order to safely ship or store the Tablet Dock in the future. 3 Fujitsu Stylistic ST4000 Series Tablet Dock IDENTIFYING THE COMPONENTS Before using your Tablet Dock, you should familiarize yourself with its various features. Side Latch (both sides) Interface Connector Back Latch Positioning Guide Platform Front of base (Do not use as a carrying handle). Figure 1. Front View Easel Release Buttons LAN (RJ-45) Jack External Monitor (VGA) Port Line Out Jack Positioning Guide Back Latch Lock Release Button Lock Handle Kensington® Lock Slot CD-ROM or Combo DVD/ CD-RW Drive IEEE 1394 Jack USB Ports (Qty. 3) DC In Jack 4 Figure 2. Back View Tablet Dock User’s Guide Tablet Dock User’s Guide DOCKING YOUR SYSTEM Microsoft® Windows® uses “plug- and-play” technology to automatically load the files necessary to operate your Tablet Dock and any attached devices. Microsoft® Windows® uses “plug-and-play” technology to automatically load the files necessary to operate your Tablet Dock and any attached devices. 1. Plug the system’s AC adapter into a wall outlet, then into the Tablet Dock’s DC Input jack. 2. Set the ST4000 series system on the Tablet Dock, with the system oriented in the same direction as the dock. (See Figure 3 for location). The connector in the back of the system should be aligned with the interface connector on the Tablet Dock. Figure 3. Docking the system 3. Carefully push the system towards the docking port until you hear a click. The click indicates that the side latches are in place. Note that the system is not yet locked into place until the following step is performed. 4. Firmly pull the lock handle down as far as it will go. This engages the back latches and side latches, and locks the system in place. 5. Your Tablet Dock is now ready for use.You may now attach devices to it. The front portion of the base should not be used as a handle.It is designed to support the system when it is installed in the Tablet Dock, but not as a handle. UNDOCKING YOUR SYSTEM Use these instructions when you want to remove your system from the Tablet ...