Stimmen - 5, Durchschnittliche Bewertung: 4 ( )

Hersteller: iHome Dateigröße: 810.47 kb Dateiname: 128e155e-3bb1-487b-81f5-f8460f42e524.pdf Unterrichtssprache:

1. Press the MENU button repeatedly to select the music top menu. Song Shuffle • You can play all of the songs in your iPod in random order. 1. Press the MENU button repeatedly to select the music top menu. Now Playing • During playback, you can display information about the current song. DS-10(A)_ENG_090212:DS-10(A) 2009-02-19 . 10:43 ... 12 ENGLISH 13 Screen Saver • You can set the time at which the screen saver is activated to any one of the following four options: 1 minute, 5 minutes, 10 minutes or Off(screen saver off). When the screen saver activates, the OSD on the TV disappears. Press any button on the remote control to cancel the screen saver and resume the onscreen display. 2. Press the UP(^) and DOWN(Ў) buttons to select "Screen Saver" and then press the SELECT button. 3. Press the UP(^) and DOWN(Ў) buttons to select the desired time and then press the SELECT button. 1. Press the MENU button repeatedly to select the music top menu. DS-10(A)_ENG_090212:DS-10(A) 2009-02-19 . 10:43 ... 13 ENGLISH 14 VIDEO MODE 1. Press the MENU button to select the video mode. 2. Press the UP(^) and DOWN(Ў) buttons to select Movies, Music Videos, TV Shows, Video Podcasts or Rentals and then press the SELECT button. 3. To select a video and to play it, press the UP(^) and DOWN(Ў) buttons, and then press the SELECT button. Playing Videos ¦Notes: • During playback of video, press the MENU button to return to the previous menu. • The video menu is properly displayed only when the language setting on the iPod is set to English. Be sure to set the language to English before you use the video menu. 1. Select the desired song or video displayed on TV and play it. 2. During playback or when playback is paused, remove your iPod from the iPod Dock or change the OSD mode to off. 3. When you reinsert the iPod into the iPod Dock (, set the OSD mode to on and select the music mode or the video mode), press the RESUME button to resume playback of the remembered song or video. Resume Function ¦Note: • You can resume playback of the song or video that was playing with the Resume function, when you removed your iPod from the iPod Dock or changed the OSD mode to off. • The current song or video is remembered. ¦Notes: • The Resume function can be used only when the OSD mode is set to on. • If the AC adapter is disconnected, the remembered song or video will be forgotten. • If your iPod is removed during shuffle playback, when it is reinserted and the Resume function is used, playback will resume with any song. DS-10(A)_ENG_090212:DS-10(A) 2009-02-19 . 10:43 ... 14 ENGLISH 15 • Depending on a Sherwood receiver and generation of iPod, you may also able to use following functions. ¦Note: • The connected receiver may take several seconds to startup, so you might not hear the first few seconds of the first song or video. .Auto Power On Function(*) • If you start iPod playback while the receiver is in the standby mode, the receiver will automatically turn on and select your iPod as the input source. Then your iPod will start playback. .Direct Change Function(*) • If you start iPod playback while listening to another input source, the receiver will automatically select your iPod as the input source. .Using Your Receiver's Remote Control • You can use your receiver's remote control to control basic iPod functions. (For details, refer to "USING THE RECEIVER'S REMOTE CONTROL" on page 16.) (*) : • If you use your iPod's controls to start an iPod slideshow or video, these functions will not work, so use the remote control instead. .Notes: • The iPod Dock must be connected to the receiver with both a Digi Link-I cable and an audio cable to use Digi Link-I functions. • If the connected receiver doesn't support the auto power on and direct change functions, you'll need to turn the receiver on and off and select the input source manually. • Before you select another input source, stop iPod playback to prevent the receiver from selecting the iPod input source by mistake. • If any accessories are connected to your iPod, the receiver may not be able to select the input source properly. • While your iPod is in the iPod Dock, it's volume control has no effect. If you adjust your iPod's volume control while it's in the iPod Dock, make sure it's not set too high before you reconnect your headphones. OTHER FUNCTIONS Digi Link-I Functions • The iPod Dock charges your iPod's battery while your iPod is in the iPod Dock. ¦Notes: • To charge your iPod battery, the AC adapter must be plugged into a suitable wall outlet and connected to the iPod Dock's DC IN jack. • Refer to your iPod's instruction manual for more information on battery charging. Charging your iPod's Battery DS-10(A)_ENG_090212:DS-10(A) 2009-02-19 . 10:43 ... 15 ENGLISH 16 • The following table shows which buttons on Sherwood receiver's remote control such as RD-7503 you can use to control your iPod while it's in the iPod Dock. Be sure to select the appropriate device mode (DOCK) first, and point you...

Herunterladen

Geben Sie zwei Ziffern: