Stimmen - 3, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
The amp/control board is capable of producing 9 watts RMS into the 8 . loudspeaker with 9VDC minimum power provided by Cisco IEEE 802.3AF compliant POE switches (local 12-18VDC PSU’s may also be used instead of POE switches). Interconnection is via a board mounted female RJ-45 connector. The industry standard APF-15 loudspeaker used in the IHVP is a highly efficient 15 watt compression driver with a proven record of outstanding service reliability. A double re-entrant design provides superior audibility of voice and tone signaling. The vandal resistant, cast aluminum alloy baffle provides security and durability in commercial applications. A perforated 22-gauge stainless steel metal screen is provided over the loudspeaker to maximize protection and performance by allowing the optimum percentage of open area forward of the loudspeaker. The baffle is finished in neutral white electrostatic powder coat and is packaged with all necessary vandal resistant mounting screws. INFORMACAST® COMPLIANT HORN LOUDSPEAKER SYSTEM POWERED BY CISCO® POE NETWORK SWITCHES IHVP © 2008 Atlas Sound LP Printed in U.S.A. 00506 ATS002381 RevB 1/08 SL1-2089 IHVP (Back View) IHVP (Side View) IHVP (3.4 View) *IPS-ZC1 interfaces to PA601 amplifier in IDF/MDF location. PA601 ENCLOSURE IS NOT INCLUDED. Available optional enclosures: amplifier will power a single zone of up to (40) APF-15T loudspeakers set to 1 watt power tap each. This configuration will to provide up to 80dB SPL @ 50' from each APF-15T device in the zone. MODEL DESCRIPTION SEST-IH Surface mount, straight enclosure for IVHP, stainless steel construction, neutral white finish FEST-IH Flush mount straight enclosure for IHVP, stainless steel construction, no finish ARCHITECT AND ENGINEER SPECIFICATIONS Unit shall be Atlas Sound Model IHVP. The loudspeaker system shall include factory assembled horn loudspeaker, IP addressable PCB amplifier/control and cast aluminum alloy baffle. Loudspeaker shall be Atlas Sound Model APF-15. Unit shall be double re-entrant type with compression driver mounted within vandal-resistant housing. Audio power capability shall be 15 watts continuous. Frequency response shall be 600-14,000 Hz (nominal), 700-5,500 Hz (± 5 dB). Sound pressure leval shall be 104 dB (1 W / 1 M). Sound dispersion angle shall be 95°. Loudspeaker mounting shall be by eight .1875" (4.76 mm) evenly spaced holes. Model APF-15 dimension shall be 5 5.8" (143 mm) Dia. x 3.4375" (87 mm) Deep with 6.9375" (176 mm) Dia. flange. Finish shall be grey baked epoxy. The IP addressable PCB amplifier/control shall be mounted to the rear of the loudspeaker baffle via concealed weld studs. The amplifier/control PCB shall be capable of producing 9 watts RMS with a minimum of 9VDC power provided either locally or via Cisco IEEE 802.3AF compliant POE switches. Interconnect shall be via female RJ-45 connector mounted to the PCB. All control functionality of the PCB amplifier shall be determined via software. The metal loudspeaker baffle overall dimensions shall be 12.88" (327 mm) wide by 14.38" (365 mm) tall. Construction shall be cast from self-aging aluminum alloy with a tensile strength of 44,000 P.S.I. Assembly shall include provisions to mount the re-entrant horn. 22-gauge perforated stainless screen shall be spot welded over the loudspeaker cut-out. Flush-mounting tamperproof heat-treated alloy screws and a special wrench shall be furnished. Dimensions shall be 10.75" (237 mm) square by .75" (19 mm) deep (not including weld stuf depth.) Baffle finish shall be textured white epoxy. Optional enclosures shall include white stainless steel surface mount model SEST-IH and flush mount model FEST-IH (unfinished.) APF-15 LOUDSPEAKER SPECIFICATIONS Power Handling 15 W continuous Sensitivity 120 dB at 15 W (peak) 114 dB at 15 W / 1 M (avg) 700-5,500 Hz 104 dB 1 W / 1 M (avg) 700-5,500 Hz Frequency Response 600-14,000 Hz (nominal) 700-5,500 Hz (±5 dB) Dispersion 95° (-6 dB, 2000 Hz octave band) Dimensions 5 5.8" Dia. x 3 7.16" D x 6 15.16" Dia. Flange Finish Grey baked epoxy BAFFLE SPECIFICATIONS Baffle Material Cast aluminum Speaker Grille Material 22-gauge perforated stainless steel Overall Dimensions 10.75" (273 mm) square x 1" (25 mm) deep Color White AMPLIFIER/CONTROLLER SPECIFICATIONS Power Rating 9 watts RMS into 8 . load with 9VDC In Inpute RJ-45 female on PCB accessible from rear of baffle Outputs 2 wire main ± terminated to loudspeaker Power Source Cisco IEEE 802.3AF compliant POE network switches or local 12-18VDC PSU Dimensions 4.25" (108 mm) by 7.25" (184 mm) Mounting 4 holes to weld studs on baffle (factory assembled) Network Control Berbee InformaCast on multicast enabled networks Specifications subject to change without notice 1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A. TELEPHONE: (800) 876-3333 / FAX (800) 765-3435 AtlasSound.com © 2008 Atlas Sound LP Printed in U.S.A. 00506 ATS002381 RevB 1/08 SL1-2089 ...