Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Connectivity diagram
A
Bluetooth®
B
USB PC/Mac for 5.1
BT-D1 Bluetooth® Audio Transmitter
1. Plug in the USB cable, wait for a series of “Found New Hardware” message to appear on
A
computer screen.
2. Select Creative T6 USB Audio and click Set default.
● Enjoy high performance wireless audio via BT-D1
1
1. LED status indicator.
2. Multi function CONNECT button.
2
● Connect your BT-D1 to your speaker
Windows XP
Windows 7
Mac OS
1. Power ON the speaker by pressing the Power ON/OFF button.
3. Switch to “USB” audio by pressing the “USB” button on remote or “Source” button on audio
2. Insert the BT-D1 into PC/Mac USB port.
control pod.
3. Wait for computer to install hardware.
4. Play your music.
4. BT-D1 connected when speaker LED shows steady Blue.
NOTE: A Bluetooth connection will take precedence over a USB audio connection.
● To established a new connection between BT-D1 with
C
Aux In/Line In
Creative T6
1. Press and hold CONNECT button for 3 seconds while Creative T6 is ON.
2. Put the BT-D1 into pairing mode for pairing.
3. Press and hold the CONNECT button (BT-D1) for 3 seconds then release.
Wait for LED pattern to turn from Pairing pattern to Connected pattern.
B
Pairing
For Mac OS:
. . .
a) Go to “System Preferences” ,
choose “Sound”
Connected (2 sec blink interval)
b) Choose the Output tab, select
. . .
“Creative Bluetooth® Audio D1”
4. Ready to stream music from computer.
● To disconnect from the BT-D1
[
To stop streaming music from the BT-D1 to your receiving Bluetooth device,
simply either plug out the BT-D1 or press the CONNECT button once. Pressing
once more will reconnect the BT-D1 back to its last connected Bluetooth device.
C
NOTE: Switch to Aux-In/Line In by pressing the “Aux” button on remote or
“source” button on audio control pod.
Enjoy audio from Stereo Bluetooth devices
[ • Optional (sold separately)
1. Power on the speaker and LED status indicator will show green.
2. Press and hold CONNECT button for 3 seconds while Creative
T6 Series II is ON.
i.
ii.
iii.
iv.
Connectivity
Connectivity
Creative T6
Creative T6
Bluetooth ON
Search results
PASSCODE
CONNECTED
Network
Creative T6
0000
Connections
Operator
Internet
USB
3. Turn on Bluetooth feature on your device.
4. Search for Creative T6.
5. Pair and connect to Creative T6, if prompted for password, enter 0000.
6. Pairing successful, ready to stream music.
NOTE: A Bluetooth connection will take precedence over a USB audio connection.
Reset to factory setting
1. Power OFF the speaker.
2. Press and hold Power button for 7 seconds.
3. Creative T6 will auto Power up. When the Blue LED starts to blick, Creative T6
is ready for pairing.
...