Stimmen - 3, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
See below. COnTRAST SETTinG inSTRUCTiOnS Set Contrast Set Contrast These buttons will allow the user to scroll up and down through the Brightness highlighted text. Contrast The Enter button will select the highlighted setting. 17 MODE SElECTiOn inSTRUCTiOnS The Mode selection menu can be accessed by selecting the Mode hot key or through the top menu. Push the Menu Up button until you get to the top menu screen. MODE SElECTiOn Use the Scroll Up and Scroll Down buttons to select the desired mode and then push Enter. See below. MODE inSTRUCTiOnS These buttons will allow the user Mode Display to scroll up and down through the highlighted text. AM FM The Enter button will select the highlighted setting. iPod AUX HD SCAn inSTRUCTiOnS Push the HD Scan button to scan available HD stations; once you’ve arrived at a desired station, press the Enter button. HD SCAn bUTTOn DEFiniTiOn 1/28/09 10:34am 1 -HD))) HD Scanning 100.3 FM ///////////////////// 18 jbl On TiME 400iHD USER GUiDE TAGTAG TAG inSTRUCTiOnS English When tuned to an HD station, the TAG button can be selected to capture artist and song information. TAGGinG A SOnG Push the TAG button and wait for the unit to confirm that information has been “Tagged.” If the iPod is docked, the “Tagged” information will be passed to the iPod and then can be accessed through iTunes the next time the iPod is synced to iTunes through your computer. See below. 1 TAG bUTTOn DEFiniTiOn TAGTAGGING [Artist and song title] 1/28/09 10:34am 1 -HD))) When the TAG button is selected, the broadcasted information will be saved and transferred to the iPod. 2 TAG bUTTOn DEFiniTiOn — COnFiRMATiOn TAGTAGGED Tagged Information Confirmed 1/28/09 10:34am 1 -HD))) When “Tagged” information is captured, the unit will confirm that data is captured. 19 lAnGUAGE SETTinG inSTRUCTiOnS Language setting menu can be accessed through the top menu. Push the Menu Up button until you get to the top menu screen. SET lAnGUAGE Use the Scroll Up and Down keys to highlight the language preference, then press Enter. The language you select will automatically default the date settings to the regional preference. See below for details. lAnGUAGE SETTinG inSTRUCTiOnS DATE SETTinG DEFAUlT — EnGliSH Date Settings Choose Display Language These buttons will allow the user to scroll up and down through the English highlighted text. Month/Day/Year French Day/Month/Year Spanish The Enter button will select the highlighted setting. lAnGUAGE SETTinG inSTRUCTiOnS Choose Display Language DATE SETTinG DEFAUlT — FREnCH AnD SPAniSH English French Date Settings These buttons will allow the user to scroll up and down through the Spanish highlighted text. Month/Day/Year Day/Month/Year The Enter button will select the lAnGUAGE SETTinG inSTRUCTiOnS highlighted setting. Choose Display Language English French Spanish 20 jbl On TiME 400iHD USER GUiDE EnglishEnglish SPECiFiCATiOnS TROUblESHOOTinG jbl On Time™ 400iHD sOunD QualiTY Frequency Response: 75Hz – 20kHz Symptom Possible Problem Solution Note Power Consumption: 30 Watts maximum JBL On Time™ 400IHD Transducer: Phoenix SE 1-3/4" (45mm) x 2 (full range per channel) Power: 6 Watts x 2 < 1% THD Input Impedance: >5k Ohms Signal-to-Noise Ratio: >75dB Input Sensitivity: 500mV RMS for rated power output Power (USA/Canada): 120 Volts, 60Hz AC UL/CUL/CE-Approved Dimensions: 14-3/16" x 5" x 3-1/16" (W x D x H) (361mm x 128mm x 79mm) Weight: 2 lb (0.9kg) No sound from the JBL On Time™ 400IHD speaker dock No power to the unit Incorrect source selection No sound or weak signal from Bad reception from current location the AM/FM radio Interference Make sure the wall power outlet or power strip has power. Make sure all switches for outlet/power strip are on and that all switches for speaker system are on. Ensure that the correct source is selected; choose FM radio as a source. Turn up the volume. Check the system with a known good source, such as your iPod. Connect the Aux In cable to the headphone jack on your iPod. Reposition your JBL On Time 400IHD unit until you find better reception. Check surrounding area for any possible interference; wrap up any excess cables. Is the display on? If not, power is not getting to your JBL On Time 400IHD unit; try the solutions shown. If you are still getting a weak signal from AM broadcasts, connect the external AM antenna to the AM antenna jack. Sound comes only from one iPod or audio cable is not seated Make sure the iPod or Aux In cable is seated all the If you are using an extension cable side/channel properly way into the JBL On Time 400IHD unit. or a third-party cable, make sure it’s a 3.5mm stereo male-to-male cable. Distortion (static, crackling or Noise may be caused by interference hissing sounds) from a monitor, cell phone or other transmitting device JBL On Time 400IHD unit is being over- driven by an amplified audio source Volume level may be too high Turn monitor off to see whether noise is eliminated. Move JBL On Time 400IH...