Login:
Stimmen - 3, Durchschnittliche Bewertung: 4.3 ( )

Anleitung Dynex, modell DX-IPD

Hersteller: Dynex
Dateigröße: 84.55 kb
Dateiname: DX-IPD_UserManual.pdf
Unterrichtssprache:enesfr
Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite



Anleitung Zusammenfassung


For… Use this adapter… iPod Mini (4 GB/6 GB) 3 iPod (20 GB/U2 Special Edition) 4 iPod (40 GB) 5 iPod with color display (20 GB/30 GB/U2 Special Edition) 6 iPod with color display (40 GB/60 GB) 7 iPod Nano 8 iPod Video (30 GB) 9 iPod Video (60 GB) 10 2 Place your iPod in the docking station. Connecting to a TV using the S-Video or A/V cable 1 To connect S- Video, plug the S- Video cable into the docking station and your TV. 2 To connect standard video, connect the A/V cable into the docking station’s 3.5mm auxiliary jack, then connect the yellow RCA plug to your TV’s yellow Video In jack. Connecting to an external audio device 1 To connect external audio, connect the A/V cable into the docking station’s 3.5mm auxiliary jack, then connect the red and white RCA plugs to your audio device’s red and white Audio In jacks. Connecting power using the USB sync cable 1 Plug the AC power adapter into an AC power outlet. 2 Plug the USB sync cable into the USB port on the AC power adapter and the 30-pin connector on the back of your docking station. AV cable S- Video cable AV cable S- Video cable DX-IPD.indd 1 4/22/2006 12:00:54 PM 3 You may control your iPod charging mode using the ON/OFF switch located on the side of your docking station. 4 The LED turns green to indicate that the docking station is charging your iPod. If you turn the ON/OFF switch off, the LED turns off . 5 Your iPod works normally whether the ON/OFF switch is on or off . Using your docking station Synchronizing with your computer 1 Plug the sync cable’s 30-pin connector into the back of the docking station. 2 Plug the sync cable’s USB plug into a USB port on your computer. Warnings • Disassembling your iPod docking station and AC power adapter may damage them. • Do not use the docking station and AC power adapter in a wet environment. • If your iPod does not recharge after 8 hours, contact Dynex for service. • Keep the docking station away from children. This Class B digital apparatus complies with Canadian ICES-003. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Disclaimer Dynex is the trademark of Best Buy, Inc. iPod is a registered trademark of Apple Computer, Inc., registered in the U.S. and other countries. All rights reserved. TV and stereo not included. DX-IPD.indd 2 Contenu de la boite • Station d’accueil • Adaptateur d’alimentation CA • Cable AV 1,5 m (5 pi) • Cable de synchronisation 1,8 m (6 pi) • Cable S- Video 1,8 m (6 pi) • Adaptateur universel de station d’accueil 2,4 m (8 pi) Installation Connexion de l’iPod a la station d’accueil 1 Connectez l’adaptateur universel approprie a la station d’accueil de l’iPod. Pour… Utilisez cet adaptateur… iPod Mini (4 Go/6 Go) 3 iPod (20 Go/U2 Edition speciale) 4 iPod (40 Go) 5 iPod avec affi chage couleur (20 Go/30 Go/U2 Edition speciale) 6 iPod avec affi chage couleur (40 Go/60 Go) 7 iPod Nano 8 iPod Video (30 Go) 9 iPod Video (60 Go) 10 2 Placez votre iPod sur la station d’accueil. Connexion a un televiseur a l’aide du cable S-Video ou du cable A/V 1 Pour la connexion S- Video, branchez le cable S- Video sur la station d’accueil et sur le televiseur. 2 Pour la connexion video standard, branchez le cable A/V sur le connecteur auxiliaire de 3,5 mm de la station d’accueil puis branchez la prise RCA jaune sur le connecteur d’entree video jaune du televiseur. Pour la connexion d’un peripherique audio 1 Pour la connexion audio externe, branchez le cable A/V sur le connecteur auxiliaire de 3,5 mm de la station d’accueil puis branchez les prises RCA rouge et blanche sur les connecteurs d’entree audio rouge et blanc du peripherique audio. Connexion de l’alimentation a l’aide du cable de synchronisation USB 1 Branchez l’adaptateur d’alimentation CA sur une prise secteur CA. 2 Branchez le cable USB de synchronisation sur le port USB de l’adaptateur Cable Audio/Video Cable S- Video Cable Audio/Video Cable S- Video 4/22/2006 12:00:55 PM d’alimentation CA et le connecteur a 30 broches a l’arriere de la station d’accueil. 3 Vous pouvez controler le mod...


Bewertungen



Bewerten
Vorname:
Geben Sie zwei Ziffern:
capcha





Kategorien