Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
2 Press / to select a track or file. Search within a track 1 During play, press and hold / to search within a track. 2 Release to resume normal play. Repeat and shuffle play 1 During play, press MODE/MONO/ STEREO repeatedly to select: • (repeat one): The current track is played repeatedly. • (repeat all): All tracks are played repeatedly. • (shuffle): All tracks are played in a random sequence. 2 To return to normal play, press MODE/MONO/STEREO repeatedly until repeat/shuffle mode is no longer displayed. Note ••The repeat and shuffle play cannot be activated at the same time. ••Shuffle play cannot be selected when you play programmed tracks. Program tracks You can program a maximum of 20 tracks. 1 In CD/USB mode, at the stop position, press PROG/CLOCK SET to activate the program mode. »»[PROG] (program) blinks on the display. 2 For MP3/WMA tracks, press ALBUM +/- / to select an album. 3 Press / to select a track number, and then press PROG/CLOCK SET to confirm. 4 Repeat steps 2 to 3 to program more tracks. 5 Press to play the programmed tracks. »»During play, [PROG] (program) is displayed. • To erase the program, in the stop position, press . Display ID3 information • In disc mode, during play, press OK/INFO/ RDS to display the following information: • Track number • Play time • Title name • Artist name • Album name EN 6 Play from a Bluetooth device Note ••Before you connect a Bluetooth-enabled device to the unit, familiarize yourself with the Bluetooth capabilities of the device. ••Keep the unit away from other electronic devices that may cause interference. ••The effective operation range between the unit and the paired device is approximately 10 meters (30 feet). ••Any obstacle between the unit and the device can reduce the operational range. 1 Press PAIRING to select the Bluetooth source. »»The Bluetooth indicator flashes blue. 2 Activate the Bluetooth function on your Bluetooth device (see the device user manual). 3 Select ‘PHILIPS DTM9030’ on your device for pairing. »»The Bluetooth indicator turns solid blue. »»The unit beeps. • For some devices, you may need to input “0000” as the pairing password. 4 Start music play on your Bluetooth enabled device. BT0000PIN PHILIPSDTM9030 Tip ••If the unit switches from Bluetooth source to other sources, the connected Bluetooth device disconnects automatically. ••The unit can memorize up to 8 previously connected Bluetooth devices. To disconnect the Bluetooth-enabled device: • Deactivate Bluetooth on your device; or • Move the device beyond the communication range. To clear Bluetooth pairing history: • Press and holdBT SETUP on the main speaker for 3 seconds. »»The current Bluetooth connection is disconnected. »»After successful clearing, the Bluetooth indicator flashes blue. English EN 7 Play iPod/iPhone You can enjoy audio from iPod/iPhone through this unit. Compatible iPod/iPhone With the integrated dual docks, the unit supports the following iPod, and iPhone models: Made for (lightning connection): • iPhone 5 • iPod nano (7th generation) • iPod touch (5th generation) Also made for (30-pin connection): • iPhone 4S • iPhone 4 • iPhone 3GS • iPhone 3G • iPhone • iPod nano (2nd/3rd/4th/5th/6th generation) • iPod classic • iPod touch (1st/2nd/3rd/4th generation) Load the iPod/iPhone Note ••You can only use one dock each time. 1 Lift up the dock cover. 2 Connect your iPod/iPhone to the lightning or 30-pin dock connector. Listen to the iPod/iPhone Note ••Make sure that your iPod/iPhone has been loaded securely. 1 Press DOCK/MENU to select the dock source. 2 Play audio on your iPod/iPhone. • To navigate in the menu: press DOCK/MENU, and press / / / to select, and then press OK/INFO/RDS to confirm. • To pause/resume play, press . • To skip to a track, press / . • To search during play, press and hold / , then release to resume normal play. EN Charge the iPod/iPhone • When the unit is connected to power, the docked iPod/iPhone begins to charge automatically. Remove the iPod/iPhone • Pull the iPod/iPhone out of the dock. English EN 8 Listen to the radio Tune to a radio station Tip ••For optimal FM reception, fully extend and adjust the position of the FM antenna. 1 Press FM to select the FM tuner source. 2 Press and hold / for more than two seconds. »»[SEARCH] (search) is displayed. »»The radio tunes to a station with strong reception automatically. 3 Repeat step 2 to tune to more stations. • To tune to a weak station, press / repeatedly until you find optimal reception. Select stereo/mono broadcast For stations with weak signals: to improve the reception, change to monaural sound. • In FM tuner source, press MODE/MONO/ STEREO to select a setting: • [STEREO]: stereo broadcast. • [MONO]: monaural broadcast. Program radio stations Tip ••You can program a maximum of 20 preset radio stations. Program radio stations automatically • In FM tuner mode, press and hold PROG/ CLOCK SET for more than two seconds to activate automatic programming. »»[AUTO SRCH](auto search) is displ...