Stimmen - 3, Durchschnittliche Bewertung: 4
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
* Server name: This name appears in the [Server setting] menu of the “GIGA JUKE” Music Server. The connection between the unit and the “GIGA JUKE” Music Server is completed. Connection and preparation 19GB Setting up the network manually When you use an AOSS-incompatible wireless LAN access point, you can set the connection manually. . Connect the wireless LAN access point to “GIGA JUKE” Music Server. For details on connections, refer to the “GIGA JUKE” Music Server operating instructions. . Confirm the server function of “GIGA JUKE” Music Server is active. The server function of “GIGA JUKE” Music Server is factory set to “Start”. For details on activating the server function, refer to the “GIGA JUKE” Music Server operating instructions. . Connect the unit to “GIGA JUKE” Music Server. Note You may encounter setup difficulties if the unit and the wireless LAN access point are located too far from each other. If you do, place the devices closer to each other. For details on the input values for the following procedures, refer to the operating manual of the respective device or the information provided by your Internet provider. 1 Press SETTINGS on the unit. The Settings menu appears in the display. 2 Select [Network setting] – [Manual setting] – [Connection setting] – [Manual]. 3 When “Change the wireless LAN setting values?” appears, select [Yes]. The unit automatically starts searching for a connectable wireless network (SSID). 4 Select the network name (SSID) from the list or select [Direct input]. 5 Follow the instructions that appear in the display and set the necessary items. “Network name (SSID)” and “Security setting” appear only if you selected [Direct input] in step 4. To enter text, press ./. repeatedly until the desired letter or number appears, and then press ENTER. Each time you press ./., the character type changes in the following order. Numbers (0 to 9) . Uppercase alphabet (A to Z) . Lowercase alphabet (a to z) . Symbols (!, ", #, $, …) After selecting the character type (“0”, “A”, “a”, or “!” is displayed), press and hold ./. until the desired character appears. Continued . . Network name (SSID): Enter the network name (SSID). . Security setting: Select [WEP64/128bit], [WPA/WPA2], or [None]. . Network key: Enter the network key (security key). Hexadecimal number, ASCII code can be used. . Address setting: Select [Full automatic] or [Custom]. When you select [Full automatic]: The unit automatically sets the IP address and the DNS server, and then moves to the display for step 6. When you select [Custom]: The display switches to the IP address setting display. . IP address setting: Select [Auto (DHCP)] or [Manual]. When you select [Auto (DHCP)]: The unit automatically sets the IP address, subnet mask, and default gateway. When you select [Manual]: Enter the values for the IP address, subnet mask, and default gateway. . DNS server setting: Select [Auto] or [Manual]. When you select [Auto]: The unit automatically sets the DNS server. When you select [Manual]: The DNS server setting window appears. Specify DNS 1 (preferred DNS server) and DNS 2 (alternate DNS server). 6 When “Switch network settings to manual.” appears, select [OK]. The server selection window appears. 7 Select the name of the server (such as [NAS-S500HDE])* that you want to connect to. * Server name: This name appears in the [Server setting] menu of the “GIGA JUKE” Music Server. The connection between the unit and the “GIGA JUKE” Music Server is completed. Setting up a proxy server manually You may have to set up a proxy server, depending on the specifications of your Internet provider or the network settings. 1 Enter the Settings menu and select [Network setting] – [Manual setting] – [Proxy setting] – [On]. Specify the IP address and port number, and then press and hold ENTER. 2 When “Switch proxy settings.” appears, select [OK]. Note If after opening the Settings menu no operation is performed for three minutes, the setup is automatically cancelled. When this occurs, items that were entered are not saved. Operation 21GB Playing audio data stored on your “GIGA JUKE” Music Server You can use this unit to play audio data stored on your “GIGA JUKE” Music Server. Before you can do this, you must first connect the unit to the “GIGA JUKE” Music Server. Note If standby mode on the “GIGA JUKE” Music Server is set to “Standard (power save)”, the unit will not be able to connect to the “GIGA JUKE” Music Server. 1 Press HOME NETWORK. If you are using the unit for the first time, a server selection display appears. The next time you press HOME NETWORK, the unit automatically connects to the last connected server and the playback window appears (the server selection display does not appear). If information regarding the last audio data played is no longer available, or if [Off] has been set for [Server setting] – [Server auto connect], the server selection display will appear. 2 Press ./. to select the name of the “GIGA JUKE” Music Server ...