Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
• Follow all instructions. • Do not use this apparatus near water. • Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. • Do not install near any heat sources such as radiators, heat registers, stoves, or other devices (including amplifiers) that produce heat. • Only use attachments/accessories specified by the manufacturer. • Refer all servicing to qualified service personnel. Servicing is required when the device has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the device, the device has been exposed to rain or moisture, does not operate normally, or has been dropped. • Devices shall not be exposed to dripping or splashing. • Do not place any sources of danger on the device (e.g. liquid filled objects, lighted candles). Warning ••Never remove the casing of this apparatus. ••Never place this apparatus on other electrical equipment. Notice Any changes or modifications made to this device that are not expressly approved by Philips Consumer Lifestyle may void the user’s authority to operate the equipment. This product complies with the radio interference requirements of the European Community. A copy of the EC declaration of Conformity is available in the Portable Document Format (PDF) version of the user manual at com/support. Disposal of your old product When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/EC. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health. Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed with normal household waste.Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environmental and human health. Always bring your product to a professional to remove the built-in battery.() 2 Your Bluetooth Speaker Power supply The speaker can operate on built-in rechargeable battery. To recharge the built-in battery: Connect micro USB socket() with PC through supplied USB cable. »»The power indicator(b) turns on. • The power indicator turns off when it’s fully charged. 3 Play Play from a Bluetooth device Note: The effecitve operation range between the speaker and your Bluetooth device is approximately 10 meters (30 feet). 1 Slide (e) towards to select Bluetooth audio source. »»The Bluetooth indicator() flashes.(Blue) 2 Activate the Bluetooth function in your Bluetooth device. 3 Select “PHILIPS SBT50” on your Bluetooth device for pairing. »»The speaker beeps twice and the Bluetooth indicator() stays steadily on.(Blue) • For some devices, you may need to input “0000” as pairing password. 4 Start music play on your Bluetooth device. When there is an incoming call: • Press Bluetooth button(d) to pick up the call. • Press Bluetooth button(d) again to hang up the call. Tip ••You can speak to the MIC(c) to get the best speakerphone performance. Play from an external device 1 Slide (e) towards AUX to select Aux-in audio source. »»The power indicator(b) turns white. 2 Connect your speaker with an external device throught the supplied USB cable. 3 Start music play on your device. 4 Product information Note: Product information is subject to change without prior notice. Rated Output Power 2W RMS Aux-in Link 600 mV RMS, 10 kohm DC power input USB: 5V, 500mA; Built-in Li-Polymer battery 3.7V 500mAH Battery working time >8 hours Dimensions-Weight (diameter x height) D56mm * H80mm Weight- Main Unit 0.125 kg Bluetooth specification V2.1+EDR Supported Profiles HFPv1.6, A2DPv1.2, HSPv1.2 Advanced features Echo and noise cancellations Range 10 m/33 feet line of sight 5 Troubleshooting Warning ••Never remove the casing of this apparatus. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this apparatus, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site (When you contact Philips, ensure that the apparatus is nearby and the model number and serial number are available. No power ••Recharge your speaker. No sound ••Adjust volume on your mobile phone or PC/Mac. ••Make sure that your Bluetooth mobile phone is within the effective operation range. ••Check if you have selected the correct audio source. No response from the speaker ••Restart the speaker. All registered and unregistered trademarks are property of their respective owners. © 2013 Koninklijke Philips Electronics N.V. All rights reserved. SBT50_00_UM_V2.0 ...