Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
(5) 2. Verbinden Sie den grunen 3.5-mm-Stereostecker andem kabelgebundenen Regler mit dem Audioausgang an der Soundkarte des PC oder einer anderen Tonquelle. (6) 3. Verbinden Sie den schwarzen 3.5-mm-Stereostecker mit dem Audioeingang. (4) 4. Verbinden Sie den Netzstecker mit einer Steckdose. 5. Schalten Sie das System mithilfe des Netzschaltersan der Ruckseite des Subwoofers ein/aus. 6. Stellen Sie das System mithilfe der PC-Soundkarteoder einer anderen Quelle ein. 7. Stellen Sie die Lautstarke mithilfe des Lautstarkereglersan dem kabelgebundenen Regler ein. 8. Sie konnen die Lautstarke des Subwoofers uber den Bassregler am Subwoofer einstellen. Hinweis: 1. Uberprufen Sie, ob alle Verbindungen hergestelltwurden, bevor Sie den Netzstecker an die Stromversorgung anschlie.en. 2. Die Eingange sind entsprechend der FarbkodierungPC 2002 gekennzeichnet (Grun fur Eingang ‘L/R’). Important notes for users in the U.K. Mains plug This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows: 1 Remove fuse cover and fuse. 2 Fix new fuse which should be a BS1362 5 Amp, A.S.T.A. or BSI approved type. 3 Refit the fuse cover. If thefitted plugis not suitable for your socket outlets, itshould be cut off andan appropriateplug fittedin its place. If the mains plug contains a fuse, this shouldhavea value of 5Amp.Ifa plug without a fuse is used, the fuse at the distribution board should not be greater than 5 Amp. Note: The severed plug must be disposed of to avoida possible shock hazard shouldit be inserted into a13Amp socket elsewhere. How to connect a plug The wires in the mains lead are coloured with the following code: blue = neutral (N), brown = live (L). As these colours may not correspond with the colour markings identifying the terminals in your plug, proceed as follows: •Connect the blue wire to the terminal marked N or coloured black. •Connect the brown wire to the terminal marked L or coloured red. •Donotconnecteither wiretotheearthterminal intheplug,markedE (or )or colouredgreen(orgreenandyellow). Before replacingtheplugcover,make certain that the cordgripis clamped over the sheath of the lead -not simply over the two wires. Copyright in the U.K. Recording and playback of material may require consent.SeeCopyrightAct1956and The Performer's Protection Acts 1958to 1972. English 1. Connect both satellite speakers to “Audio Output” connector. (5) 2. Connect 3.5mm green stereo plug on the cable control to “Audio Output” connector on the PC sound card or other sound source. (6) 3. Connect 3.5mm black stereo plug to “Audio Input” connector. (4) 4. Plug the power supply to mains plug. 5. Switch on/off the system by using the power switch atthe rear of subwoofer. 6. Tune system, using PC sound card or other sound source. 7. Tune volume, using volume knob on the cable control. 8. Subwoofer level can be tuned on the bass control knob on the subwoofer. Note: 1. Do not insert the power plug into AC outlet until allconn...