Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
2 Open the iPhone/iPod/iPad dock on the top panel and place the iPhone/iPod/iPad in the dock. . To pause/resume play, press . . To skip to a track, press / . . To search during play: press and hold / , then release to resume normal play. . To navigate the menu: press MENU and / to select items, then press OK ' Note . When iPod/iPhone/iPad source is selected, you cannot enjoy audio through the headphone socket. Charge the iPod/iPhone/iPad The docked iPod/iPhone/iPad begins to charge as soon as the unit is connected to AC power. Note . iPod with color display, iPod classic, and iPod with video are not compatible with dock charging. Remove the iPod/iPhone/iPad 1 Pull the iPhone/iPod/iPad off the dock. 2 Flip down the lid to hide the dock. EN 17 English 6 Listen to FM radio Plug & Play Installation when the unit turn to Radio mode, and No radio stations are stored, [AUTO INSTALL - PRESS PLAY, STOP CANCEL] (to auto install, press ; to cancel, press ) displays. 1 Press on the main unit to star t installation. » The unit automatically stores radio G $# $ ' » When all the available radio stations % is broadcast automatically. Toexit Plug and Play installation mode 2 press source keys or on the remote control. » The system switches to the designated source mode or standby mode. Tune to FM radio stations Warning . Ensure that you have connected and fullyextended the supplied FM antenna. 1 Press RADIO. 2 Press and hold / to search to a radio station. 3 When the frequency star ts to change, release the button. » The FM tuner tunes to a station with strong reception automatically. 4 Repeat steps 2-3 to tune to more stations. 18 EN To tune to a weak station: Press / #; # ; # reception. Tip [STEREO] is default setting for tuner mode. . Under tuner mode, you can press OK repeatedly to toggle between [STEREO] and [MONO], and the unit memorizes your setting even if you turn off the unit or turn to other sources. Program radio stations automatically Note . You can program a maximum of 20 preset radio stations. 1 In tuner mode, press and hold PROGRAM for 2 seconds to activate automatic program mode. » [AUTO] (auto) is displayed and begins to blink. » $ broadcast automatically. Program radio stations manually Note . You can program a maximum of 20 presetradio stations. 1 Tune to a radio station. 2 Press PROGRAM to activate programming. 3 Press / to allocate a number from 1 to 20 to this radio station, then press PROGRAM ' » The preset number and the frequency of the preset station are displayed. 4 Repeat the above steps to program other stations. Note . To over write a programmed station, store another station in its place. Tune to a preset radio station 1 Press / to select a preset number that you want. Show RDS information RDS (Radio Data System) is a ser vice that allows FM stations to show additional information. If you tune to a RDS station, a RDS icon and the station name are displayed. 1 Tune to a RDS station. 2 Press RDS repeatedly to scroll through the following information (if available): » Station name » Program type such as [NEWS] (news), [SPORT] (spor t), [POP M] (pop music)... » RDS clock » Frequency Synchronize clock with RDS You can synchronize time shown on the unit with that on the RDS station. 1 Tune to a RDS radio station that transmits time signals. 2 Press RDS for over 2 seconds. » [CT SYNC] is displayed and the unit reads RDS time automatically. » If no time signal is received, [NO CT] is displayed. Note . The accuracy of the transmitted time depends on the RDS station that transmits the time signal. English EN 19 7 Other features Set alarm timer This unit can be used as an alarm clock.You can select CD, Dock, iPod/iPhone playlist, FM or USB as alarm source. Note . Make sure that you have set the clock correctly. 1 In standby mode, press and hold TIMER until [TIMER SET] scrolls on the display. 2 Press source buttons on the remote control to select a source: CD, FM, USB, Dock or iPod/iPhone playlist. . If iPod/iPhone playlist is selected as alarm source, you need create a playlist called “PHILIPS” in your iPod/ iPhone. . If no playlist called “PHILIPS” is created in the iPod/iPhone or no track is stored in the playlist, the unit switches to iPod/iPhone alarm source. 3 Press TIMER ' » The hour digits are displayed and begin to blink. 4 Press VOL +/- repeatedly to set hour, then press TIMER $ ' » The minute digits are displayed and begin to blink. 5 Press VOL +/- to set minute, then press TIMER ' » VOL (volume) is displayed and begins to blink. 6 Press VOL +/- to adjust volume, then press TIMER ' 20 EN Activate/deactivate alarm timer 1 In standby mode, press TIMER repeatedly to activate or deactivate timer. » If timer is activated, is displayed. Tip . Alarm timer is not available in MP3 LINK mode. . If CD/USB/iPod/iPhone source is selected, yet no disc is placed or no USB/iPod/iPhone connected, the system switches to the tuner source automatically. Set the sleep timer ...