Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
Note ••Make sure that your Android-powered device is connected to the Internet. First-time launch 1 On your docking speaker, press to activate Bluetooth. »» blinks on the display panel. 2 On the home screen of your device, tap the DockStudio icon to launch the app. DockStudio »»A prompt message asking you to download Songbird appears. 3 Tap [Cancel] (cancel). EN »»The device starts to scan Philips devices that can be paired automatically. 4 When [PHILIPS AS351] is displayed on your device, select it to start connection. »»It may take a few seconds to complete the connection. »»After Bluetooth connection, a different Bluetooth icon can be found on the top of the screen. 5 Play audio with the media player of your portable device. EN »»The audio comes out through the docking speaker. Next-time launch Next time you launch the DockStudio app, connect to the docking speaker through Bluetooth as below. 1 Activate the Bluetooth function of your docking speaker. 2 Launch Philips DockStudio to access its menu. 3 Tap [Speaker Connection] (Speaker Connection) to activate automatic Bluetooth connection. »»It may take a few seconds to complete the connection. EN 4 Play audio on your portable device. »»The audio comes out through the docking speaker. Dock and charge Android- powered phone Dock Android-powered device To charge your Android-powered phone, you need to dock it in the docking speaker first. 1 Check the orientation of the micro USB connector on your Android-powered phone. If your USB connector has a cover, flip it outwards. 2 If necessary, rotate the USB connector on the docking speaker, and then place your Android-powered phone onto the dock. 3 Adjust the bumpers on both sides of the connector to stabilize the phone. 4 Slide the connector to place your phone in the middle of the docking speaker. Tip ••If the micro USB connector is located at the top, and your are using Android system of version 2.3 or above, screen auto-rotation is available. Use dock extension If the USB connector on your phone is close to the edge, the supplied dock extension can balance the docked phone, as illustrated. 1 Adjust the slide knobs to make both bumpers at the lowest position. 2 Place the dock extension onto the dock. 3 Dock your phone. EN Dock extension Charge Android-powered phone When the docking speaker is connected to power, the docked phone starts charging automatically. Tip ••This function is also available for non Android-powered device that has a micro USB connector. Play audio with Philips Songbird Philips Songbird is a simple, easy-to-use PC program and Android app. It lets you discover, play and sync your media from PC to your Android-powered devices seamlessly. Install Songbird on Android-powered device 1 Tap the DockStudio icon on your Android- powered device. DockStudio »»The DockStudio menu is displayed. 2 Tap [Songbird]. EN »»You are requested to download Songbird. 3 Follow the on-screen instructions to download the app. 4 After installation, tap [Open] (Open) to access Songbird menu. 5 Select a track, and then tap to play music. EN Install Songbird on PC 1 Go to 2 Search Songbird. songbird 3 Download the latest Songbird application. 4 Follow on-screen instructions to install Philips Songbird on your PC. Sync with PC through Philips Songbird Note ••Make sure that you have turned on the USB storage. 1 On your PC, launch Philips Songbird. 2 Connect your Android-powered device to PC with a USB cable. Wait until the device is recognized by the Songbird. »»On Philips Songbird, the device is displayed when it is recognized by the PC. »»If it is the first time you connect the device to Philips Songbird, a pop-up screen appears. Select auto sync as prompted. »»The device synchronizes with Philips Songbird automatically. If you didn't select auto sync, you can sync with Songbird manually. 1 Select the device under Devices. 2 Select Manual or Auto. 3 Click Sync. »» If you have selected auto sync, auto sync starts automatically when you connect the device to the PC. EN 5 Other features Use more features with DockStudio With Philips DockStudio, you can also listen to Internet radio, set alarm timer and sleep timer. Note ••Make sure that your portable device is connected to the Internet. Listen to Internet radio 1 Connect your Android-powered device and the docking system through Bluetooth. 2 Open Philips DockStudio to go to the main menu. 3 Tap [Radio] (Radio) on the screen. 4 Search a radio station in the search bar. 5 Select a radio station from the search result list. »»The radio station begins to broadcast. Set sleep timer 1 Launch Philips DockStudio. 2 Tap the icon to access the sleep timer menu. EN 3 Select a time period for the sleep timer, and then tap [Start] (Start). Note ••This function only works with Philips Songbird. Set alarm timer With Philips DockStudio, you can set multiple alarms and know the latest weather. It even alerts you when weather conditions are suitable for your favorit...