Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
• Refer all servicing to qualified service personnel. Servicing is required when the unit has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the unit has been exposed to rain or moisture, does not operate normally, or has been dropped. • The unit shall not be exposed to dripping or splashing. • Do not place any sources of danger on the unit (e.g. liquid filled objects, lighted candles). • Where the plug of the Direct Plug-in Adapter is used as the disconnect device, the disconnect device shall remain readily operable. 4 EN 2 Your Docking Entertainment System Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at Introduction With this unit, you can enjoy audio from iPod/ iPhone or an external device. What's in the box Check and identify the contents of your package: • Main unit • Power adapter • Quick start guide • Safety sheet EN 3 Get started Always follow the instructions in this chapter in sequence. Connect power Caution ••Risk of product damage! Ensure that the power voltage corresponds to the voltage printed on the back or underside of the unit. ••Risk of electric shock! When you unplug the AC adapter, always pull the plug from the socket. Never pull the cord. Warning ••To reduce the risk of fire or electric shock, do not expose this device to rain or moisture. Connect the power adapter to: • the DC IN socket at the back of the device. • the power socket. Tip ••The type plate is located on the bottom of the device. Synchronize time with iPod/ iPhone When the docking system is connected to power and an iPod/iPhone is docked, the docking system synchronizes time with the iPod/Phone automatically. »»Time is stored in the docking system even if the ipod/iPhone is disconnected. Set time format 1 Press and hold for 2 seconds. »»[12H] or [24H] is displayed. 2 Press VOLUME +/- repeatedly to select 12 or 24 hour format. 3 Press to confirm. EN 4 Play from iPod/ iPhone You can enjoy audio from iPod/iPhone through this unit. Compatible iPod/iPhone The docking system supports these iPod and iPhone models: Made for. • iPod touch (1st, 2nd, 3rd, and 4th generation) • iPod classic • iPod with video • iPod nano (1st, 2nd, 3rd, 4th, 5th, and 6th generation) • iPod with color display • iPhone 4 • iPhone 3GS • iPhone 3G • iPhone Listen to audio from iPod/ iPhone 1 Place an iPod/iPhone in the dock. 2 Play audio from the iPod/iPhone. Tip ••To pause/resume play, press . ••In iPod/iPhone mode, if an external audio device is connected, the device switches to MP3 Link mode. Remove the iPod/iPhone Pull the iPod/iPhone out of the dock. Charge the iPod/iPhone When the device is connected to power, the docked iPod/iPhone starts charging. Adjust volume To adjust volume, press VOLUME +/- repeatedly. EN 6 Product information Note ••Product information is subject to change without prior notice. Specifications Amplifier Rated Output Power 20W RMS General information AC Power Model: AS190-100- AI180; Input: 100-240 V ~, 50/60Hz, 0.7A; Output: 10V 1.8A Operation Power Consumption <12 W Standby Power Consumption <2 W Max. Load for iPod/ iPhone 5 V, 1 A Dimensions - Main Unit (W x H x D) 290 x 158 x 113 mm Weight - With Packing - Main Unit 1.97 kg 1.47 kg EN 7 Troubleshooting Warning ••Never remove the casing of this apparatus. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this apparatus, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site (philips.com/welcome). When you contact Philips, ensure that the apparatus is nearby and the model number and serial number are available. No power ••Ensure that the AC power plug of the unit is connected properly. ••Ensure that there is power at the AC outlet. No sound ••Adjust the volume. No response from the unit ••Disconnect and reconnect the AC power plug, then turn on the unit again. EN 8 Notice This product complies with the radio interference requirements of the European Community. Any changes or modifications made to this device that are not expressly approved by Philips Consumer Lifestyle may void the user’s authority to operate the equipment. “Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod or iPhone respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod or iPhone may affect wireless performance. iPod and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries. Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. ...