Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
• Protect the power cord from being walked on or pinched, par ticularly at plugs, convenience receptacles, and the point where they exit from the apparatus. • Only use attachments/accessories specified by the manufacturer. • Unplug this apparatus during lightning storms or when unused for long periods of time. • Refer all ser vicing to qualified ser vice personnel. Ser vicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. • Batter y usage CAUTION – To prevent batter y leakage which may result in bodily injur y, proper ty damage, or damage to the unit: • Install all batteries correctly, + and - as marked on the unit. • Do not mix batteries (old and new or carbon and alkaline, etc.). • Remove batteries when the unit is not used for a long time. • Batteries (batter y pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. • Apparatus shall not be exposed to dripping or splashing. • Do not place any sources of danger on the apparatus (e.g. liquid filled objects, lighted candles). • Where the plug of the Direct Plug-in Adapter is used as the disconnect device, the disconnect device shall remain readily operable. Warning • Never remove the casing of this apparatus. • Never place this apparatus on other electrical equipment. • Ensure that you always have easy access to the power cord, plug or adaptor to disconnect the apparatus from the power. 3 EN 2 Your Docking Speaker Congratulations on your purchase, and welcome to Philips! To fully benefit from the suppor t that Philips offers, register your product at If you contact Philips, you will be asked for the model and serial number of this apparatus.The model number and serial number are on the bottom of the apparatus. Write the numbers here: Model No. __________________________ Serial No. ___________________________ Introduction With this docking speaker, you can enjoy audio from the iPod/iPhone, and other external audio devices. What's in the box Check and identify the contents of your package: • Main unit • AC power adaptor • Quick star t guide • Safety sheet EN 4 Overview of the main unit bacd efg a • Star t or pause play. b • Mute sound. c VOLUME + / • Adjust volume. d Dock for the iPod/iPhone e MP3-LINK • Connect an external audio device. f Battery compartment g DC IN • Connect AC power. 5 EN 3 Get started Always follow the instructions in this chapter in sequence. Connect power This docking speaker can be powered by either AC power or batteries. Option 1: AC power Caution • Risk of product damage! Make sure that the power supply voltage matches the voltage printed on the bottom of the unit. • Risk of electric shock! When you unplug the AC adapter, always pull the plug from the socket. Never pull the cord. Note • The type plate is located at the bottom of the device. Connect the AC power adaptor to: • the power socket at the back of the docking speaker. • the wall socket. DC IN Option 2: Battery power Caution • Risk of explosion! Keep batteries away from heat, sunshine or fire. Never discard batteries in fire. • Remove batteries if they are exhausted or will not be used for a long time. • Batteries contain chemical substances, so they should be disposed of properly. 1 Open the batter y compar tment. 2 Inser t 4 x 1.5V AA/UM3/LR6 batteries with correct polarity (+/-) as indicated. 3 Close the batter y compar tment. Note • You can hear incontinuous beep sound if the batter y is low.Then replace the batteries. EN 6 4 Play Play from iPod/iPhone You can enjoy audio from your iPod/iPhone through this docking speaker. Compatible iPod/iPhone The docking speaker suppor ts the following iPod and iPhone models: Made for. • iPod touch (1st, 2nd, 3rd, and 4th generation) • iPod classic • iPod nano (1st, 2nd, 3rd, 4th, 5th, and 6th generation) • iPhone 4S • iPhone 4 • iPhone 3GS • iPhone 3G • iPhone Listen to the iPod/iPhone 1 Place an iPod/iPhone in the dock. 2 Play audio on the iPod/iPhone. 3 To adjust volume, press VOL +/-. 4 To mute, press . 5 To play or pause, press . To remove the iPod/iPhone: Pull the iPod/iPhone out of the dock. Play from an external audio device Note • Make sure that no iPod/iPhone is docked in the speaker. 1 Connect an MP3 link cable (not supplied) to: • the MP3 LINK socket at the back of the docking speaker. • the headphone socket on an external device. 2 Press to play music on the device (see the device's user manual). Charge the iPod/iPhone When the docking speaker is connected to power, the docked iPod/iPhone begins to charge automatically. 7 EN 5 Specifications Amplifier Total Output Power 4W per channel x 2 Signal to Noise Ratio > 62 dBA MP3 Link 650mV RMS General information Power supply Model: AS110-080AE130 (Philips); -AC Power Adaptor Input: 10...