Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
• the wall outlet. »»During power charging, flashes in green if you have switched on DS3480. is always on in red if you have switched off DS3480. »»When the battery is full, the is always on in green if DS3480 is on; the turns off if DS3480 is off. EN Tip ••When the battery level is low, flashes in red. ••Rechargeable batteries have a limited number of charge cycles. Battery life and number of charge cycles vary by use and settings. Switch on or off • Press to switch on. »», lights up amber. »»The Bluetooth status indicator flashes. DS3480 starts to pair or reconnect through Bluetooth. • To switch off, press again. Automatic standby After 15 minutes in idle mode (no play, no button is pressed), the player switches off. 4 Play Play through the lightning dock With the lightning dock on DS3480, you can play from the following iPhone/ iPod: ••iPhone 5 ••iPod touch (5th generation) ••iPod nano (7th generation) 1 Make sure that you have switched on DS3480. 2 Mount your iPhone/ iPod onto the dock. • The first time you mount your iPhone/ iPod onto DS3480, install the ClockStudio app on your iPhone/iPod as prompted: App storeIgnore 3 On your iPhone/ iPod, start music play. Tip ••To remove the iPhone/ iPod, pull it out of the dock. English EN Play through Bluetooth Through Bluetooth, you can play on DS3480 from a Bluetooth device, such as an iPad, iPhone, Android phone, or laptop. Connect through Bluetooth 1 On DS3480, press to switch on. »»The Bluetooth status indicator flashes. DS3480 starts to pair or reconnect through Bluetooth. PHILIPS DS3480 2 On your Bluetooth device, activate Bluetooth and search for Philips DS3480. • For the first-time connection, select Philips DS3480 to start pairing. »»When the connection is complete, the Bluetooth indicator is always on in blue and two beeps sound. »»Next time you switch on DS3480, the speaker connects to the last paired device automatically. Tip ••To connect DS3480 to another Bluetooth device, switch off Bluetooth on current Bluetooth device. ••To clear paired devices from DS3480, press and hold for five seconds. EN Play from a Bluetooth device 1 Make sure that you have removed your iPhone/ iPod from the lightning dock. 2 After successful connection, start music play on DS3480. Note ••Make sure the distance between DS3480 and the Bluetooth device is within 10 meters. ••The music streaming may be interrupted by obstacles between the device and DS3480, such as walls, or other devices nearby that operate in the same frequency. Play through an audio cable Through an MP3 link cable, you can also play on DS3480 from an external audio device, such as an MP3 player. 1 Use an MP3 link cable to connect DS3480 with an external audio device. 2 On DS3480, do the following: • Make sure that you have paused the music on your iPhone/ iPod docked on DS3480; • Switch off Bluetooth on the Bluetooth device that is connected to DS3480. 3 On the external audio device, start music play and change the volume. English EN Adjust the volume • Press , repeatedly; or • Press and hold , to increase or decrease the volume quickly. »»When you reach the maximum or minimum level, , flashes in amber. 5 Charge Charge through the lightning dock With the lightning dock on DS3480, you can charge your iPhone/ iPod when music play is on or off. 1 Mount your iPhone/ iPod onto the lightning dock on DS3480. 2 Connect DS3480 to power. Charge through the USB connector With the USB connector on DS3480, you can charge your mobile phone. 1 Use a USB cable to connect DS3480 with the external device. 2 Connect DS3480 to power. EN 6 Update the firmware With the ClockStudioapp on your iPhone/ iPod, you can update the firmware of DS3480. 1 Make sure that your iPhone/ iPod is connected to the Internet. 2 Mount the iPhone/ iPod onto the lightning dock of DS3480. »»ClockStudio starts to search for available firmware update. »»When the firmware update is available, a message is displayed. 3 Follow onscreen instructions to complete firmware updating. Note ••During the firmware updating, keep the iPhone/ iPod powered on and docked on DS3480. 7 Specifications Amplifier Rated Output Power 2 X 5 W RMS General information Power supply - AC Power - Battery Model: KSASB0241200200D5; Input: 100-240 V ~, 50/60Hz,48-62VA, 0.6A; Output: 12 V 2.0 A Li-ion battery Operation Power Consumption <18 W Standby Power Consumption <0.5 W Max. load for iPod/ iPhone 5 V 1 A Dimensions - Main Unit (W x H x D) 274 x 143 x 109 mm Weight - Main Unit 1.2 kg Operating temperature and humidity: 0°C to 45°C, 5% to 90% Humidity for all climates. Storage temperature and humidity: -40 °C to 70 °C, 5% to 95% Bluetooth Bluetooth version V2.1+ EDR Frequency band 2.402-2.480 GHzISM Band Rang 10m (free space) English EN 8 Troubleshooting Warning ••Never remove the casing of this apparatus. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this apparatus, check the following points before requesting service. If ...