Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Fotos und technische Daten Philips OST690/10 |
Anleitung Zusammenfassung
Turn on Switch the power slide to the ON position. » The system switches to the last selected source. » The LED indicator lights up. Note • In USB or Bluetooth mode, if the system is idle for 15 minutes, it switches to standby mode automatically.To exit the standby mode, press . Turn off Switch the power slide to the OFF position. » The LED indicator turns off. Switch to standby mode In AC power supply mode, if there is no operation for 3 hours, this product will switch to standby mode automatically for energy- saving. After the first 30-minute inactivity, the display will star t to show the remaining time before entering standby mode (from 149:59 to 0:00). In DC power supply mode, if there is no operation for 15 minutes, this product will switch to standby mode automatically for energy-saving. After the first 5-minute inactivity, the display will star t to show the remaining time before entering standby mode (from 9:59 to 0:00). You may press to cancel the countdown and resume normal operation or continue charging. EN 4 Play Play from a USB device Note • Make sure that your USB device contains playable audio content. 1 Rotate the source selector to the USB position. 2 Press to open the compar tment. 3 Inser t the USB device into the socket inside the compar tment. » Play star ts automatically. If not, press . Note • The USB socket is not compatible with music playback from your smar tphone. Control play In USB mode, you can control play through the following operations. / Select an audio file; Press and hold to fast-forward or fast-reverse the track during playback, then release to resume play. ALB-/ ALB+ Skip to the previous or next MP3/ WMA album. Star t or pause play. Stop play. MODE [ ]: Play the current track repeatedly. [ ]: Play the current album repeatedly. [ ]: Play all tracks repeatedly. [ ]: Play tracks randomly. To return to normal play, press MODE repeatedly until the repeat or shuffle icons disappear. Program tracks In USB mode, you can program the play sequence of tracks. A maximum of 20 tracks can be programmed. 1 Press to stop playback. 2 Press PROG to activate the programming mode. » [PROG] is displayed and [P01] begins to blink. 3 For MP3/WMA tracks, press ALB -/ALB + to select an album. 4 Press / to select a track number, then press PROG to confirm. 5 Repeat steps 3-4 to program more tracks. 6 Press to play the programmed tracks. » During play, [PROG] (program) is displayed. • To erase the program, press twice. EN 8 Play from Bluetooth-enabled device Note • The effective operating range between the system and the paired device is approximately 10 meters (30 feet). • Any obstacle between the system and the device can reduce the operational range. • Compatibility with all Bluetooth devices is not guaranteed. 1 Rotate the source selector to the BLUETOOTH position. 2 On your Bluetooth device, enable Bluetooth and search for Bluetooth devices that can be paired (refer to the user manual of the device). 3 When [OST690] is displayed on your device, select it to star t pairing and connection. » After successful pairing and connection, the system beeps twice. 4 Play audio on your device. » Audio streams from your device to this system. To disconnect the Bluetooth-enabled device: • Deactivate Bluetooth on your device; or • Move the device beyond the communication range. To clear Bluetooth pairing history: Press and PROG together for 3 seconds. » The current Bluetooth connection is disconnected. » After successful clearing, [CLR] (clear) blinks for 5 seconds, then [-] scrolls on the display. Play from an external audio device You can also listen to an external audio device such as an MP3 player through this system. 1 Press to open the compar tment. 2 Connect an audio cable (3.5mm, not supplied) to: • the AUDIO IN socket inside the compar tment. • the headphone socket on an external device. » The system switches to Audio-in mode automatically. 3 Play audio on the external device (see the user manual of the device). EN 5 Listen to FM radio Tune to FM radio stations Note • For better reception, fully extend and adjust the position of the FM antenna. 1 Rotate the source selector to the FM position. 2 Press SEARCH +/-. » The system tunes to a station with strong reception automatically. 3 Repeat step 2 to tune to more stations. To tune to a radio station manually: Rotate the tuning knob slowly. Store radio stations automatically In tuner mode, press and hold PROG for 2 seconds. » The system stores all the available FM radio stations. » The first stored radio station is broadcast automatically. Store radio stations manually Note • You can store a maximum of 20 FM radio stations. 1 Tune to an FM radio station. 2 Press PROG to activate the storing mode. 3 Press PRESET + or PRESET -to allocate a number (1 to 20) to this radio station, then press PROG to confirm. » The preset number and the frequency of the preset station are displayed. 4 Repeat the above steps to store other stations. Note • To remove a pr...