Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
Compatible iPod/iPhone The docking speaker supports the following iPod and iPhone models: Made for. • iPod touch (5th generation) • iPod nano (7th generation) • iPhone 5 Listen to the iPod/iPhone To enjoy more features, you are recommended to install the free ClockStudio app. 1 Press to turn the docking speaker on. »»The LED indicators light up. 2 Insert the iPod/iPhone into the dock. 3 For first-time use, you will be asked to install ClockStudio app on your iPod/ iPhone. 4 Tap [Yes] (yes) to accept the installation request. 5 Follow the on-screen instructions to complete the installation. 6 Launch the app after the installation. 7 Play audio on your iPod/iPhone. »»Audio comes out through this docking speaker. Note ••With the ClockStudio app, you can enjoy radio, set clock and alarm, adjust sound settings, and update firmware if necessary. Update firmware If firmware update is available, the ClockStudio app will search for it automatically and ask you to download it. Note ••Make sure that your iPod/iPhone is inserted in the docking speaker and connected to the Internet. 1 If a new firmware update is found, tap OK. EN 2 Follow the on-screen instructions to complete the firmware update. Note ••Do not disconnect power or undock the iPod/iPhone during the updating process. Charge the iPod/iPhone Note ••If the docking speaker is operated on the batteries, you cannot charge your iPod/iPhone. When the docking speaker is connected to AC power, the docked iPod/iPhone begins to charge. Sync iPod/iPhone with PC Note ••Make sure that iTunes has been configured properly in your PC. 1 Insert the iPod/iPhone in the dock. 2 Press to switch to standby mode. »»The LED indicators light off. 3 Connect your docking speaker and PC with a USB cable. EN 4 Launch iTunes to synchronize your docking speaker with PC. »»The docked iPod/iPhone is synchronized with PC successfully through the iTunes. Note ••Due to different materials and product techniques, some USB cables may not work with this device. Play from an external device With this docking speaker, you can also enjoy audio from an external device such as an MP3 player. Note ••Make sure that there is no audio detected from docking connector in the speaker. 1 Press to turn the docking speaker on. 2 Connect the MP3 link cable (not supplied) to: • the AUDIO-IN socket at the back of the docking speaker. • the headphone socket on an external device. 3 Play audio on the device (see the device's user manual). Adjust volume To adjust volume: • Press +/- on your docking speaker; or • Adjust the volume control of your iPod/iPhone or external device. Tip ••If the docking speaker is powered by batteries, the volume is lower than that by AC supply. EN 5 Specifications Amplifier Rated Output Power 2 X 5 W RMS General information Power supply - AC Power - Battery Model: KSAS0151200150HE; Input: 100-240 V ~, 50/60Hz, 0.4A; Output: 12 V 1.5 A 4 x AA batteries Operation Power Consumption <10.5 W Standby Power Consumption <0.5 W Max. load for iPod/ iPhone 5 V 1 A Dimensions - Main Unit (W x H x D) 274 x 143 x 109 mm Weight - Main Unit 1.06 kg 6 Troubleshooting Warning ••Never remove the casing of this apparatus. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this apparatus, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site (philips.com/welcome). When you contact Philips, ensure that the apparatus is nearby and the model number and serial number are available. No power ••Make sure that the AC power adaptor of the device is connected properly. ••Make sure that there is power at the AC outlet. ••Make sure that the batteries have been installed correctly. No sound or poor sound ••Adjust the volume of your docking speaker. ••Adjust the volume of your iPod/iPhone or external audio device. No response from the unit ••Disconnect and reconnect the AC power plug, and then switch on the device again. Cannot sync with PC ••Switch the docking speaker to standby mode. ••Try another USB cable. ••Install iTunes in PC properly. EN 7 Notice Any changes or modifications made to this device that are not expressly approved by Philips Consumer Lifestyle may void the user’s authority to operate the equipment. “Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod or iPhone respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod or iPhone may affect wireless performance. iPod and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries. This product complies with the radio interference requirements of the European Community. Your product is designed and manufactured with high quality materials and components,...