Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
• Protect the power cord from being walked on or pinched, par ticularly at plugs, convenience receptacles, and the point where they exit from the apparatus. • Only use attachments/accessories specified by the manufacturer. • Unplug this apparatus during lightning storms or when unused for long periods of time. • Refer all ser vicing to qualified ser vice personnel. Ser vicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. • Apparatus shall not be exposed to dripping or splashing. • Do not place any sources of danger on the apparatus (e.g. liquid filled objects, lighted candles). • Where the plug of the Direct Plug-in Adapter is used as the disconnect device, Warning • Never remove the casing of this apparatus. • Never lubricate any par t of this apparatus. • Never place this apparatus on other electrical equipment. • Keep this apparatus away from direct sunlight, naked flames or heat. • Make sure that you always have easy access to the power cord, plug, or adaptor to disconnect the apparatus from the power. 2 EN 2 Your Docking Speaker Congratulations on your purchase, and welcome to Philips! To fully benefit from the suppor t that Philips offers, register your product at Introduction With this docking speaker, you can: • set time; • enjoy audio from your iPod/iPhone. What's in the box Check and identify the contents of your package: • Main unit • 1 x AC adaptor • Shor t user manual Overview of the main unit a Dock for iPod/iPhone b • Adjust brightness of bottom light. c CLOCK • Adjust brightness of the display. • Press and hold to set the clock. d • Charge your mobile phone through a USB cable. e DC IN • Connect AC power. f Display g / • Adjust volume. abgf edc EN 3 3 Get started Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this apparatus.The model number and serial number are on the bottom of the apparatus. Write the numbers here: Model No. __________________________ Serial No. ___________________________ Connect power Caution • Risk of product damage! Make sure that the power supply voltage corresponds to the voltage printed on the back of the unit. • Risk of electric shock! When you unplug the AC adaptor, always pull the plug from the socket. Never pull the cord. • Before connecting the AC adaptor, make sure that you have completed all other connections. Adjust time 1 In standby mode, press and hold CLOCK to enter the clock setting mode. » [24H] or [12H] hour format is displayed. 2 Press +/-to select [24H] or [12H] hour format, and then press CLOCK. » The hour digits are displayed and begin to blink. 3 Press +/-to set hour, and then press CLOCK. » The minute digits are displayed and begin to blink. 4 Repeat step 3 to set minute. Turn on In standby mode, the docking speaker turns on automatically when it detects an audio signal from docked iPod/iPhone. Switch to standby mode The unit switches to standby mode if there is no audio signal from docked iPod/iPhone over 15 minutes. 4 EN 4 Play Play from iPod/iPhone You can enjoy audio from iPod/iPhone through this docking speaker. Compatible iPod/iPhone The docking speaker suppor ts the following iPod/iPhone models. Made for : • iPhone 5 • iPod nano (7th generation) • iPod touch (5th generation) Load the iPod/iPhone Inser t your iPod/iPhone into the dock. » The docking speaker synchronizes time from the docked iPod/iPhone. To remove the iPod/iPhone: • Pull your iPod/iPhone out of the dock. Listen to the iPod/iPhone Note • Make sure that the iPod/iPhone is loaded correctly. Star t to play music from your iPod/iPhone. » Music streams from the docking speaker automatically. Charge the iPod/iPhone The docked iPod/iPhone begins to charge automatically after connected to power. Charge your mobile phone You can charge your mobile phone through the USB socket in this device with a USB cable (not supplied) EN 5 Adjust volume During play, press +/- repeatedly to increase or decrease the volume. Adjust brightness • Press CLOCK repeatedly to select different levels of display brightness. • Press repeatedly to select different levels of bottom light brightness. 6 EN 5 Product information Note • Product information is subject to change without prior notice. Specifications Amplifier Rated Output Power 2 x 3 W RMS Signal to Noise Ratio 77 dBA General information AC power adaptor Model: OH1018A0592400U (Philips) Input: 100-240 V, 50/60 Hz, 650 mA; Output: 5.9 V 2400 mA; Operation Power Consumption 18 W Charging (USB) .500 mA Dimensions: Main Unit(WxHxD) 177 x 177 x 100 mm Weight: Main Unit 0.88 kg EN 7 6 Troubleshooting Warning • Never remove the casing of this device. To keep the warranty valid, never tr y to repair the system yourself. If ...