Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
What’s in the box Check and identify the contents of your package: .. Main unit .. Remote control .. 1 x AC adaptor .. 1 x AC power cord .. 1 x Aux-in cable .. User manual Overview of the main unit a - VOLUME + .. Adjust volume. b iPod/iPhone dock Back View d c d AUX IN .. Jack for an ex ternal audio device. Overview of the remote control igfhaebcd 1 .. Mute volume. 2 .. Select Aux-in mode. 3 Up/down keys .. Navigate through the iPod/iPhone menu. .. Skip to the previous/nex t track. 5 .. Star t or pause play. 6 VOL +/ .. Adjust volume. 7 MENU .. Access the iPod menu. 8 OK .. .................................... 9 .. Select iPod/iPhone dock mode. Caution . Use of controls or adjustments or per formance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the bottom of the apparatus. Write the numbers here: Model No. __________________________ Serial No. ___________________________ Prepare the remote control Caution . ................................................................................................................................................ ................................................ .................................... 1 Remove the protective tab to activate the remote control batter y. To replace the remote control battery: 1 Open the bat ter y compar tment. 2 Inser t one CR 2032 bat ter y with correct polarity (+/-) as indicated. 3 Close the batter y compar tment. Note . .................................................................................................................................................... correct source with the remote control instead of the main unit. . If you are not going to use the remote control for a long time, remove the batter y. Connect power Caution . Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the bottom of the unit. . Risk of electric shock! When you unplug the AC adaptor, always pull the plug from the socket. Never pull the cord. . Before connecting the AC adaptor, ensure you have completed all other connections. 2 Connect one end of the AC power cord to the AC adaptor. 3 Connect the other end of the AC power cord to the wall outlet. Turn on The unit turns on automatically when connected to power. » When user approaches the unit, light LED under volume button on the main unit turns on automatically. .. In DOCK mode: disconnect the iPod/iPhone from the unit over 15 minutes. » The unit switches to Standby mode automatically. .. In Aux-in mode: the device no longer play music over 15 minutes. » The unit switches to Standby mode automatically. Play from iPod/iPhone You can enjoy audio from iPod/iPhone through this unit. Compatible iPod/iPhone Apple iPod and iPhone models with a 30-pin dock connector. Made for : .. iPod nano (2nd generation) .. iPod nano (3rd generation) .. iPod nano (4th generation) .. iPod nano (5th generation) .. iPod classic .. iPod touch (1st generation) .. iPod touch (2nd generation) .. iPod touch (3rd generation) .. iPhone .. iPhone 3G .. iPhone 3GS. Load the iPod/iPhone 1 Place the iPod/iPhone in the dock. 1 Pull the iPod out of the dock. Listen to the iPod/iPhone 1 Ensure that the iPod/iPhone is loaded correctly. 2 Press to select DOCK mode. 3 Press . » The connected iPod/iPhone star ts play. .. To pause/resume play, press . .. To skip to a track, press fast for ward/back ward keys. .. To search during play, press and hold fast for ward/back ward keys, then release to resume normal play. .. To navigate the menu, press MENU, then press up/down keysto select, and press OK.................... Charge the iPod/iPhone When the unit is connected to power, the docked iPod/iPhone begins to charge. Play from an external device You can also listen to an external audio device through this unit. 1 Press to select Aux-in mode. 2 Connect the supplied Aux-in cable to: .. the AUX IN jack (3.5mm) on the back of the unit. .. the headphone jack on an ex ternal device. 3 Star t to play the device (see the device user manual). 1 During play, press VOL +/- to increase/decrease the volume level. Mute sound 1 During play, press MUTE to mute/unmute sound. Note . Product information is subject to change without prior notice. ........................V ..............U Rated Output Power Signal to Noise Ratio AUX IN 2X15 W RMS 85 dB 0.6 V RMS 10 kohm General information AC power (power adaptor) OH-1048A1802500U-u Inpu t: 10 0 -240V~, 50/60Hz, 1.5A MA X; Output: 18V 2.5A; Operation Power Consumption 40W Standby Power Consumption <1W Dimensions - Main Unit (W x H x D) 158 x 420 x 139 mm Weight - Main Unit 3.32 kg Warning . Never remove the casing of this apparatus. To keep the warranty valid, never tr y to repair the system yourself. If you encounter problem...