Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
4 Repeat steps 2-3 to set the minute, year, month, day and 12/24 hour format. Turn on 1 Press POWER . » The unit switches to the last selected source. Switch to standby 1 Press POWER again to switch the unit to standby mode. » The time and date (if set) appear on the display panel. Tip • After being idled for 15 minutes in standby mode, the screen turns dim automatically. • To light up the screen, press any but ton. Adjust volume 1 During play, press VOL +/- to increase/decrease the volume. 4 Play Play from iPod/iPhone You can enjoy audio from iPod/iPhone through this unit. Compatible iPod/iPhone Apple iPod and iPhone models with a 30 -pin dock connector: • iPod classic, iPod touch, iPod nano, iPod 5th generation (video), iPod with color display, iPod mini. • iPhone, iPhone 3G . Load the iPod/iPhone 1 Place the iPod/iPhone in the dock. Turn the adjuster to fit the iPod/iPhone. Remove the iPod/iPhone 1 Pull the iPod/iPhone out of the dock. Listen to the iPod/iPhone 1 Ensure that the iPod/iPhone is loaded correctly. 2 Press SOURCE repeatedly to select iPod/iPhone source. » The connected iPod/iPhone plays automatically. • To pause/resume play, press . • To skip to a track, press / . • To search during play, press and hold / , then release to resume normal play. Charge the iPod/iPhone When the unit is connected to power, the docked iPod/iPhone begins to charge. Play from an external device You can also listen to an external audio device through this unit. 1 Press SOURCE repeatedly to select MP3 link source. 2 Connect the supplied MP3 link cable to: • the MP3 LINK jack (3. 5mm) on the back of the unit. • the headphone jack on an ex ternal device. 3 Star t to play the device (see the device user manual). 5 Listen to radio Note • Only FM radio reception is available on this unit. Tune to a radio station Tip • Position the antenna as far as possible from TV, VCR or other radiation source. • For optimal reception, fully ex tend and adjust the position of the antenna. 1 Press SOURCE repeatedly to select FM tuner. 2 Press and hold TUNING +/- for more than 2 seconds. » [Srch] (search) is displayed. » The radio tunes to a station with strong reception automatically. 3 Repeat step 2 to tune to more stations. • To tune to a weak station, press TUNING +/- repeatedly until you find optimal reception. Program radio stations automatically You can program a maximum of 20 preset radio stations. 1 In the tuner mode, press and hold TIME SET/AUTO SCAN for more than 2 seconds to activate automatic program mode. » [AUTO] (auto) is displayed and begins to blink. » All available stations are programmed in the order of waveband reception strength. » The first programmed radio station is broadcast automatically. Program radio stations manually You can program a maximum of 20 preset radio stations. 1 Tune to a radio station. 2 Press TIME SET/AUTO SCAN to activate the program mode. 3 Press PRESET +/- to select a number. 4 Press TIME SET/AUTO SCAN to confirm. » The preset number and the frequency of the preset station are displayed. 5 Repeat the above steps to program other stations. Note • To over write a programmed station, store another station in its place. Select a preset radio station 1 Press PRESET +/- to select a preset number. 6 Other features Set the alarm timer You can set two alarms which go off at different time. 1 Ensure that you have set the clock correctly. 2 Press and hold ALM 1 or ALM 2 for 2 seconds. or and hour digits begin to blink. » 3 Press TUNING +/- repeatedly to set the hour. 4 Press ALM 1 or ALM 2 to confirm. or and minute digits begin to blink. » 5 Repeat steps 3-4 to set the minute. 6 Repeat steps 3-4 to select whether to ring alarm on weekdays or at weekend. 7 Repeat steps 3-4 to select an alarm sound source. 8 Repeat steps 3-4 to set the alarm volume. Activate and deactivate the alarm timer Press ALM 1 or ALM 2 repeatedly to activate or deactivate the timer. »If the timer is activated, or is displayed. »If the timer is deactivated, or disappears. Repeat alarm 1 When the alarm rings, press REPEAT ALARM/BRIGHTNESS CONTROL . » The alarm repeats ringing minutes later. Tip • You can press TUNING+/- to adjust inter val to repeat alarm. Stop alarm ring 1 When the alarm rings, press the corresponding ALM 1 or ALM 2. » The alarm stops but the alarm settings remain. View the alarm settings Press ALM 1 or ALM 2 . Set the sleep timer This unit can switch to standby automatically after a set period of time. Press SLEEP repeatedly to select a set period of time (in minutes). » When the sleep timer is activated, the display shows . To deactivate sleep timer Press SLEEP repeatedly until [SLP OFF] (SLP off ) is displayed. »When the sleep timer is deactivated, disappears on the display. Note • When the sleep timer is activated, the volume will gradually decrease. Adjust display brightness 1 Press BRIGHTNESS CONTROL repeatedly to select different levels of display brightness. 7 Product information Note • Product information is ...