Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
. SET CLOCK is displayed briefly.Then, 12HR or 24HR is displayed. 2 Press ALBUM/PRESET +/-(or . / ™ on the remote control) to select clock mode. . The clock digits for the hours continue to flash. 3 Press ALBUM/PRESET +/-(or . / ™ on the remote control) to set the hours. 4 Press PROG again. . The clock digits for the minutes flash. 5 Press ALBUM/PRESET +/-(or . / ™ on the remote control) to set the minutes. 6 Press PROG to confirm the time. 22 Timer setting . The system can be used as an alarm clock, whereby the CD,TUNER, USB or DOCK is switched on at a set time (one time operation). The clock time needs to be set first before the timer can be used. . During setting, if no button is pressed within 90 seconds, the system will exit timer setting mode automatically. 1 Press TIMER for more than two seconds. 2 Press SOURCE repeatedly to select the sound source. . “SET TIMER” and “SELECT SOURCE” are displayed. 3 Press TIMER to confirm your desired mode. . The clock digits for the hours flash. 4 Press ALBUM/PRESET +/-(or . / ™ on the remote control) to set the hours. 5 Press TIMER again. . The clock digits for the minutes flash. 6 Press ALBUM/PRESET +/-(or . / ™ on the remote control) to set the minutes. 7 Press TIMER to confirm the time. . The timer is now set and activated. Activating and deactivating timer . In standby or during playback, press TIMER once on the remote control. . Display shows if activated, and disappears if deactivated. pg001-027_DCM230_12-Eng 22 8/29/08, 11:30 Clock/Timer Sleep timer setting The sleep timer enables the system to switch off by itself after a set period of time. 1 Press SLEEP on the remote control repeatedly to select a preset time. . The selections are as follows (time in minutes): OFF ™ 90 ™ 75 ™ 60 ™ 45 ™ 30 ™ 15 ™ OFF ™ 90 … . "SLEEP XX" is displayed. "XX" is the time in minutes. . is displayed if the sleep time you have selected is not OFF. 2 When you reach the desired length of time, stop pressing the SLEEP button. To deactivate the sleep timer . Press SLEEP repeatedly until "0FF" is displayed, or press ECO POWER/STANDBY ON 2. 23 English pg001-027_DCM230_12-Eng 23 8/29/08, 11:30 24 English iPod Dock Compatible iPod players . Most Apple iPod models with 30-pin dock connectors as follows: Nano 1st /2nd/3rd generation, iPod 5th generation (video), iPod touch and iPod classic. Selecting the correct dock adaptor . 4 iPod dock adaptors of different type, as indicated at the back of the adaptor, are included to fit the following iPod: Nano 1st /2nd/3rd generation, iPod 5th generation (video), iPod touch and iPod classic. Setup . Insert a dock adapter corresponding to the portable player you use. 2 1 . To connect with a different iPod portable player, pop up the corresponding dock adapter and replace with a new one of the matching type. Playing an iPod portable player 1 Correctly dock your iPod portable player in the cradle. Make sure the dock adaptor is compatible. . Make sure that you have powered on your iPod player before selecting DOCK source. . On the display, "iPod" is displayed if iPod is connected. 2 Press SOURCE on the system repeatedly or iPod on the remote control to select iPod source. 3 Playback starts automatically. You can select available features (such as play/pause, skip track, fast forward/backward, menu selection) during playback. Charging iPod battery using the dock . In DOCK mode, directly dock your iPod portable player on the cradle for charging. Note: – For the purpose of SAVING POWER, recharging of your iPod or USB device is NOT SUPPORTED when the main set is in the STANDBY MODE. pg001-027_DCM230_12-Eng 24 8/29/08, 11:30 Specifications AMPLIFIER Output power ....................................... 2 x 15 W RMS Signal-to-noise ratio ....................................... . 70 dBA Frequency response ...... 20 Hz – 20 KHz, ± 3 dB Input sensitivity AUX ....................... 0.5 V (max. 2 V) Impedance loudspeakers ......................................... 4 . Impedance headphones ........................................ 32 . Output power headphones ....................... <50 mW CD PLAYER Frequency range ................................ 20 Hz – 20 kHz Signal-to-noise ratio ............................................ 70 dBA TUNER FM wave range ................................... 87.5 – 108 MHz Sensitivity at 75 . – FM ................................................................................ 20dBf Selectivity ................................................................. . 25 dB Total harmonic distor tion ..................................... . 1% Frequency response – FM .............................................................. 63 – 6000 Hz Signal-to-noise-ratio – FM ....................................................................... . 50 dBA USB PLAYER USB ................................................................... 12Mb/s, V1.1 ......................................... suppor t MP3 and WMA files Number of albums/folders ............