Stimmen - 1, Durchschnittliche Bewertung: 5
(
)
)
|
Anleitung Zusammenfassung
Tuner CD player p 2 3 4 1 1 Press POWER. 2 Press 6(open/close) and place a CD on the CD tray. with the label side up 3 Press ^(play) (or (on the remote). The disc tray closes and the first track starts playing. 1 003 4 Press VOL + or – to adjust the sound level. To Press Stop play p Pause ^(or P*) To resume play, press here again. Remove the CD 6 * Remote One Touch Play feature Press ^(or (on the remote) when the power is off or you are listening to another source. As long as a CD is in the player, you will be able to listen to the CD without pressing any other buttons. To find the beginning of a track – Automatic Music Sensor (AMS) You can locate the beginning of a track while the track is playing or while it is in pause mode. To locate the beginning of the current or preceding track, press =0(or =on the remote) until you find the desired track. To locate the beginning of the succeeding track, press )+(or +on the remote) until you find the desired track. To find a point in a track You can find a particular point in a track while playing or pausing a CD. Use the buttons on the player to operate this feature. This operation is not possible with the remote. To Search Operation Forward while Hold down )+ listening and release it at the desired point. Backwards Hold down =0 while listening and release it at the desired point. GB 7 Quickly Hold down )+ or without =0during pause listening while and release it at the checking the disired point. playing time in the display Note If the CD reaches the end while you are searching quickly without listening, "OVER"appears in the display. Press =0 (=on the remote) to go back. To check the total number of tracks and total playing time Press DISPLAY on the remote while the player is in stop mode. The indications appear for a few seconds. Total number of tracks Total playing time 12 4505 To check the remaining time Press DISPLAY on the remote repeatedly while playing a CD. Each time you press DISPLAY, the display changes as follows. Current track number and Z playing time v Current track number and remaining time on the track v Remaining time on the CD Chapter 2: the CD Player Playing Tracks in Random Order (shuffle play) You can play all the tracks on the CD in random order. Use the buttons on the remote to do this operation. Tuner CD Player POWER ® ON 6 3 2 GB 8 1 Press 6(open/close) and place a CD on the CD tray. 2 Press TUNING/PLAY MODE repeatedly until “SHUFFLE” appears in the display. 3 Press (. “J” appears and then all the tracks play in random order. To cancel shuffle play Press TUNING/PLAY MODE. “SHUFFLE” disappears, and tracks continue playing in their original order. If you press TUNING/PLAY MODE during normal play You can play all the tracks on the CD in random order. To skip an undesired track Press +. You cannot go back to the preceding track by pressing =. Playing Tracks in the Desired Order (programme play) You can programme up to 24 tracks to play in any order you choose. You can do this by designating the tracks in the order you want them to play. Tuner CD Player POWER ® ON 6 6 3 2 4 1 Press 6(open/close) and place a CD on the CD tray. 2 Press TUNING/PLAY MODE repeatedly until “PGM” appears in the display. 3 Press =or +until the desired track number is displayed. The total playing time including the chosen track flashes in the display. (The programme is not entered at this time.) Track number 4 304 12 12 TUNED STEREO SHUFFLE PGM REPEAT 1 MONO AUTO MANUAL PRESET MEMORY SURR DBFB DAILY REC SLEEP kHz MHz Total playing time 4 Press ENTER. The programme number appears for about a second, and the total playing time lights up. 5 Repeat steps 3 and 4 to programme the remaining tracks you want to play in the order you want them to play. 6 Press (. All the tracks you chose play in the order you designated. To cancel the programme play Press TUNING/PLAY MODE until “PGM” disappears. To change the programme To Operation Add a track at During stop, do steps 3 – the end of the 5. programme Erase the entire During stop, press pon programme the player. After all the programmed tracks have been played The programme order remains in the CD player’s memory. You can listen to the same programme by just pressing (. Notes • Once you open the CD tray, the programme is erased. • If the total programme time has exceeded 100 minutes, the order of the programme is displayed instead of the total playing time. • If you try to programme more than 24 tracks, “FULL” is displayed. Chapter 2: the CD Player Playing Tracks Repeatedly (repeat play) You can choose between two different repeat play modes. One repeats all the tracks in the current play mode; the other repeats a single track. Use the buttons on the remote to do this operation. Tuner CD Player POWER ® ON GB REPEAT 9 Repeating all the tracks (in any play mode) Press REPEAT. “REPEAT” appears in the display, and the tracks play repeatedly in the current play mode. Repeating a single track (in normal play mode only) While the desired t...
Dieses Handbuch ist für folgende Modelle:Lautsprecher und Subwoofer - SA-N11 (2.5 mb)
Kassettendecks - TC-TX1 (2.5 mb)