Stimmen - 3, Durchschnittliche Bewertung: 4.3
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Deliver DLNA controller/Server Network controlled player (this unit) (Windows 7-based computer) 7GB Getting Started Getting Started s Main unit Front A PARTY STREAMING indicator Indicates the PARTY STREAMING status (page 25). Green: The unit is having a PARTY as PARTY host. Amber: The unit has joined a PARTY as PARTY guest. Red: An error has occurred. B PARTY button Press to use the PARTY STREAMING function (page 25). Tip This button also receives signals from a remote control. Operate the remote control aiming at this point. The remote signal reception of this unit may not work correctly when the surface of this button is dirty. C Illumination indicator Indicates the playback status of audio content. White: The unit is in playback mode. Blue: The unit has stopped playing back audio content. Note This indicator normally lights up in white even if the unit stops playing when audio input is selected. D Network standby indicator Lights up in amber when the unit is in the network standby mode (page 13). 8GB Rear Rear Getting Started E LINK indicator Indicates the connection status of the wired/wireless LAN. Green: Wireless connection (page 14). Amber: Wired connection (page 18). Red: The following status have occurred. – This unit cannot find the wireless LAN access point. – The security method/password selected for the access point is wrong. – An error has occurred. Not lit: The wireless network setting process is not finished. F WPS button Use to make the network settings for the WPS push button configuration (page 16). G AUDIO IN button/indicator Press to switch the input between the home network and the audio input. Lights up in green when the audio input is selected. This indicator goes off when the unit connects to your home network (with either a wireless or wired connection). H AUDIO IN terminal Use to connect the audio output jack of an external component. I (LAN) port Use to connect the network (LAN) cable. J VOLUME+/– buttons Use to adjust the volume. The illumination indicator flashes when the volume level is set to either minimum or maximum. K Power switch Slide the switch to turn the power on or off. Note You cannot operate this unit via a home network when the power switch is set to OFF. Set the unit to the network standby mode when you want to operate the unit via a home network. Refer to “To set the network standby mode” (page 13). L DC IN terminal Use to connect the supplied AC adaptor (page 12). 9GB M M Press and hold for more than three seconds to reset the unit to its factory default settings when the power switch is set to ON. Use a thin object, such as a small pin. The bookmark list (page 24) and any other previously registered settings or information will be reset. Note Network settings are also reset when you press ALL RESET button. ALL RESET button 10GB Remote control Getting Started A DIMMER button Press to change the brightness of the illumination indicator (normal/dark). B INPUT button Press to change the input between the home network and the audio input. C BOOKMARKS buttons Use for the bookmark function (page 24). CALL button Press to play back the audio content in the bookmark list. ADD button Press to add audio content to the bookmark list. DEL button Press to delete audio content from the bookmark list. D Operation buttons > button*: Skip to the next audio content item. . button*: Back to the previous audio content item. N/X*/x button: Start/pause/stop playback. * These buttons may not work depending on the device or the function you are using. E ?/1 (power) button Press to switch between power on and network standby mode. F PARTY button Press to use the PARTY STREAMING function (page 25). G VOLUME buttons Press to adjust the volume. 11GB Checking the Supplied Accessories Checking the Supplied Accessories ) AC adaptor (1) AC power cord (1) Operating Instructions (this manual) (1) Preparations for listening to music via your home network (Leaflet) (1) Network (LAN) cable (1) CD-ROM (“Network Speaker Wi-Fi Utility”) (1) Preparing the Unit and the Remote Connecting to an AC power source 1 Connect the AC power cord to the AC adaptor. 2 Plug the connector of the AC adaptor into the DC IN terminal on the unit. 3 Plug the AC power cord to a wall outlet (the mains). Preparing the remote control The supplied lithium battery (CR2025) has already been inserted into the remote control. Pull out the protective sheet before use. Replacing the battery of the remote control If the remote control stops working, replace the battery (CR2025) with a new one. 1 Pull out the battery holder. 2 Remove the old battery from the battery holder and then insert a new battery. 3 Reinsert the battery holder into the remote control. 12GB Turning the Unit On or Off Turning the Unit On or Off The network standby indicator lights up in amber and the illumination indicator lights up in blue. You can operate this unit when the network standby indicator goes off and the illumination indicator lights up. It may take...