Stimmen - 5, Durchschnittliche Bewertung: 4.2 ( )

Hersteller: Califone Dateigröße: 995.35 kb Dateiname: Unterrichtssprache:

A red LED indicates RF (radio frequency) from the microphone, while an amber LED indicates audio. Wireless Transmitter The PowerPro PA916 incorporates a 16 channel UHF transmitter with its own power switch for wireless transmission to the Powered Companion Speakers PA916-SP. The transmitter is preset at the factory to channel 13. It is recommended that the user not randomly change this setting. If using the transmitter function change wireless receiver “A” from channel 1 to any other channel except channel 13 to prevent the transmitter from blocking the receiver. Microphone Lockout Two wireless microphones can be used at the same time, but separate channels (frequencies) must be used. For instance, if using receiver “A” on channel 4, two microphone beltpack transmitters cannot be used at the same time. The first transmitter turned on will dominate and lock out the other. The second microphone should be used with receiver “B” on a different frequency which will allow two persons to talk at the same time. Turn the transmitter power switch to OFF when not being used to minimize battery drain. UHF FULL DIVERSITY 5 Microphones & Belt-Pack Transmitter Q-316 Wireless Microphone 16-Channel UHF Transmitter Battery Compartment Power Low Battery LED LM-316 Lapel Mic Channel Selector Switch M-316 Wireless Belt Pack Transmitter Microphone Jack Power On Switch CM-316 Collar Mic Power On/ Low Batt. LED Volume Control 16-Channel UHF Transmitter Battery Compartment HBM-316 Headband Mic 6 Cassette Recorder/Player Note: Remove the protective pad from behind the cassette door before inserting a cassette tape. 1 RECORD Press this key together with either F. PLAY or R.PLAY to Record. 2 REWIND Press this key to rewind the tape. 3 REVERSE PLAY Press this key to Play the tape backwards. 4 STOP Press this key to stop the tape. 5 FORWARD PLAY Press this key to play the tape forward. 6 FAST FORWARD Press this key for Fast Forward. 7 MODE Press this key to select one of the following 3 modes. 1) The tape will play to the end in either direction and stop automatically. 2) The tape will play to the end in the forward mode, then reverse and play to the end of the other side of the tape in Record or Play 3) This mode provides continuous play operation in the Play function. 8 MODE LED INDICATORS 9 SPEED ADJUSTMENT 10 COUNTER 11 COUNTER RESET BUTTON 12 EJECT 12 11 10 9 Normal speed; center position. Turn clockwise to increase the speed in 3% increments up to 15%. Turn counter clockwise to reduce the speed in 3% increments down to 15%. The counter is a 3-digit LCD display. Reset to “000” by pushing the button. This button opens the cassette door. 8 7 5 4 3 2 1 6 7 Automatic Cassette Program Search System The APSS (Automatic Program Search System) allows the user to skip the program being played and move the tape in the Forward or in the Reverse direction to the next program or to the previous program. It operates on the principal that there is a short period of silence between programs. When the Tape Deck is in the Play mode and the “FF” is momentarily pressed and released within 0.5 sec, the tape advances rapidly until the next program ahead is reached. At this point, the tape stops momentarily and playback of the next program starts. When the Tape Deck is in the Play mode and the “FR” is momentarily pressed and released within 0.5 sec, the tape rewinds rapidly until the beginning of the previous program is reached. At this point the tape stops momentarily and playback of the previous program starts. CD Player 1 CD SLOT 2 LCD DISPLAY 3 PAUSE/PLAY 4 STOP 5 SKIP FORWARD After the power is turned on the LCD display will read “NO disc” Gently push the CD into the slot and the CD will be recognized and begin playing track #1. W...

Herunterladen

Geben Sie zwei Ziffern: