Stimmen - 3, Durchschnittliche Bewertung: 3.3 ( )

Hersteller: Altec Lansing Dateigröße: 116.23 kb Dateiname: Unterrichtssprache:

Please read the following instructions carefully. Following these instructions will ensure that your system will deliver the best possible performance. cautions To reduce risk of injury because of an accident, be careful when working on a ladder or other high places. about this manual In-ceiling speakers can be used with many different receivers/televisions or amplifiers. They are designed to be powered by an amplifier with a minimum of 20 watts of power. features tweeter The C series in-ceiling speakers incorporate a soft dome eyeball tweeter, which lets you aim and tune your system, Ferrofluid™ and has damped voice coils. Note that the C62ic model has a dual tweeter which is movable only in one axis. For this model attention to the the speaker orientation during mounting is required so that the system can be tuned for maximum audio enjoyment. tweeter protection A solid state device reduces power to the tweeter when the loudspeaker is operated at unsafe power levels. It resets automatically when power is reduced to a safe level. Note: the tweeter protector provides a significant level of protection. However it does not guarantee that the tweeter cannot be damaged. Always be careful when operating the speakers at a high volume level. woofer The polypropylene woofer employs a barium ferrite magnet structure for well damped, extended bass and high efficiency. installation precautions and tips Please read these instructions completely for the best enjoyment of your Custom Series speakers. When you cut into the ceiling to install the speaker, do not cut through the facing or insulation that may be above the ceiling. This facing is a moisture barrier. Use duct tape or wide vinyl tape to seal any cuts. Keep debris and loose material away from the installation location. Do not allow debris to get in the openings of the woofer basket. Debris and loose material can cause buzzing or rattling, and can damage the woofer cone. Install plastic or fiberglass screening above the speaker to keep debris away. Handle the speaker carefully. Do not let anything touch the speaker cone or dome. Do not clean the speaker with paint thinner or any solvents. • Consider the services of a professional custom installer. If you have any doubts about your own abilities, it is better not to risk damaging your walls or ceilings, electrical wiring, ventilation ducts or plumbing. • Work with good quality, correct tools. This will save you time and assure superior results. • Allow sufficient clearance. • When using speakers outdoors, locations should be sheltered from direct sunlight, rain or snow. Direct exposure will shorten product life. • Combined impedance for speakers connected to each chan...

Herunterladen

Geben Sie zwei Ziffern: