Stimmen - 3, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
DOCK ADAPTORS Before plugging your player in the dock, snap the suitable dock adaptor into the dock to provide a snug fit for the player to be docked. Selecting the correct dock adaptor • For the iPod dock, 4 dock adaptors of different type, as indicated at the back of the adaptor, are included to fit the following iPod: iPod Touch 4GB/8GB, 20GB, 40GB, iPod Photo 20GB/30GB/40GB/60GB, iPod Video 30GB/60GB/80GB, iPod Classic 80GB/160GB, Mini and Nano. PLAYING iPod USING DC200 1 Remove the top cover of dock. 2 Snap the compatible iPod into the dock connector. 3 Press SOURCE repeatedly to switch on the iPod mode. • Make sure that you have powered on Apple iPod before selecting iPod source. ™ On the DC200’s display, “iPod” is displayed when iPod is connected. 4 The connected iPod player will play automatically. Notes: – By using the buttons ( 2;, .1, 2™ and VOLUME ) on the DC200, the following playback features are available: Play/Pause, selecting next/previous track, fast for- warding/rewinding and changing volume. – The buttons ( 2;, .1, 2™ and VOLUME ) on the DC200 can work only with playback of the audio contents stored on the docked player. – To navigate the iPod menu, you may use iPod MENU, 34 and OK buttons on the set. – When you press iPod MENU in iPod mode, 1234 and OK buttons first perform the navigation function, and then restore the original functions. – For iPod operations and features, refer to the user manual of your iPod player. – This set does not support iPod video output. Using USB connectivity • DC200 is fitted with a USB port on the top panel, offering a plug and play feature which allows you to play, from your DC200, digital music and audio contents stored on a USB mass storage device. • Using a USB mass storage device, you can also enjoy all the features offered by DC200. Compatible USB mass storage devices: With the DC200, you can use – USB flash memory (USB 2.0 or USB 1.1) – USB flash player (USB 2.0 or USB 1.1) • USB device which requires driver installation under Windows XP is not supported. Notes: In some USB flash players (or memory devices), the stored contents are recorded using copyright protection technology. Such protected contents will be unplayable on any other devices (such as DC200 device). Supported formats: – USB or memory file format FAT12, FAT16, FAT32 (sector size: 512 - 65,536 bytes) – MP3 bit rate (data rate): 32-320 kbps and variable bit rate – WMA v9 or earlier – Directory nesting up to a maximum of 8 levels – Number of albums: maximum 99 – Number of tracks: maximum 999 – ID3 tag v2.0 or later – File name in Uicode UTF8 (maximum length: 128 bytes The system will not play or support the following: • Empty albums: an empty album is an album that does not contain MP3/WMA files, and will not be shown in the display. • Non-supported file formats are skipped. This means that e.g.: Word documents .doc or MP3 files with extension. dlf are ignored and will not be played. • AAC, WAV, PCM. NTFS audio files • DRM protected WMA files • WMA files in Lossless format PLAYING A USB MASS STORAGE DEVICE 1 Make sure your DC200 is being powered on by AC mains. 2 Press SOURCE repeatedly to select the USB mode. 3 Plug a compatible USB mass storage device to DC200’s USB port marked . If needed, use a suitable USB cable to connect between the device and DC200’s USB port. ™ The device will automatically power on. • If the device is not powered on, turn on the power manually, then re-connect it. PROGRAMING TRACK NUMBERS 1 Press 9 to stop the playback. 2 Press PROG to enter the programming mode. ™ The current album number flashes. 3 Press .1 / 2™ to select a desired album number. 4 Press PROG to confirm. ™ The current track number flashes. 5 Press .1 / 2™ to select a desired track number. 6 Press PROG to confirm. 7 Repeat steps 3-6 to select and store all desired tracks. 8 To start playback of your programme, press 2;. Helpful hints: – Up to 999 playable audio files stored on a USB mass storage device can be played on DC200. – Up to 99 playable albums stored on a USB mass storage device can be selected and displayed on DC200. –Make sure that file names of MP3 files end with .mp3. and the file names of WMA files end with .wma. – For DRM protected WMA files, use Windows Media Player 10 (or later) for conversion. Visit for details about Windows Media Player and WM DRM (Windows Media Digital Rights Management). – For USB device playing, if the display shows "OL", it means that the USB device is electrically overloading DC200. You need to change a USB device. SLEEP This set has a built-in sleep timer, which enables the radio to be automatically switched off after a preset period of time. Setting and switching off SLEEP 1 Set your timer by pressing SLEEP repeatedly until the desired timer option appears. ™ Selections are follows (time in minute): 120=90=60=30=15=OFF=120 2 The set will turn off automatically at the selected time. 3 To cancel sleep, press either: – POWER – SLEEP once...