|
Anleitung Zusammenfassung
Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment. 2 Your Docking Entertainment System Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at Introduction With this unit, you can enjoy audio from the iPod, other audio devices, or the radio. The radio, iPod, or buzzer can be set as the alarm timer.You can set two alarm timers to go off at different times. What’s in the box Check and identify the contents of your package: • Main unit • 1 x AC adaptor • 1 x MP3 link cable • User manual • Quick start guide English EN 7 Overview of the main unit 8 EN a ALARM 1/ ALARM 2 • Set the alarm timer. • View the alarm time. • Turn off the alarm tone. b REPEAT ALARM/BRIGHTNESS CONTROL • Repeat the alarm. • Adjust the display brightness. c • Turn on the unit or switch to standby mode. d SOURCE • Select a source: iPod, FM tuner or MP3 link. e PRESET +/- • Select a preset radio station. • Adjust time. f Display panel • Show current status. g Dock compartment h • Start or pause iPod play. i / • Skip to the previous/next audio fi le. • Search within an audio fi le. j TUNING +/- • Tune to a radio station. • Adjust time. k TIME SET/AUTO SCAN • Set the clock. • Scan radio stations. l WAKE TO iPod/RADIO/BUZZ • Select alarm mode. m MP3-LINK • Jack for an external audio device. n DC IN • Power supply socket. o iPod dock • Load an iPod player. p VOL +/- • Adjust volume. • Adjust time. q SLEEP • Set the sleep timer. 3 Get started Caution • Use of controls or adjustments or performance of procedures other than hereinmay result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this apparatus.The model number and serial number are on the bottom of the apparatus.Write the numbers here: Model No. __________________________ Serial No. ___________________________ Connect power Caution • Risk of product damage! Ensure that the power voltage corresponds to the voltage printed onthe back or underside of the apparatus. • Risk of electric shock! When you unplug the AC adaptor, always pull the plug from the socket. Never pull the cord. • Before connecting the AC adaptor, ensure you have completed all other connections. Note • The type plate is located on the bottom of the main unit. 1 Connect one end of the AC adaptor to the DC IN socket on the main unit. English EN 9 2 Connect the other end of the AC adaptor to the wall outlet. Set clock 1 In standby mode, press and hold TIME SET/AUTO SCAN for 2 seconds. » The hour digits begin to blink. 2 Press TUNING +/- to set the hour. 3 Press TIME SET/AUTO SCAN. » The minute digits begin to blink. 4 Press TUNING +/- to set the minute. 5 Press TIME SET/AUTO SCAN to confi rm. » The week day digits begin to blink. 6 Press TUNING +/- to set the week day. 7 Press TIME SET/AUTO SCAN to confi rm. Turn on 1 Press . » The unit switches to the last selected source. Switch to standby 1 Press again to switch the unit to standby mode. » The clock (if set) appears on the display panel. Adjust volume 1 During play, press VOL +/- to increase/ decrease the volume. 4 Play Play from iPod You can enjoy audio from iPod through this unit. Compatible iPod Apple iPod models with a 30-pin dock connector: • iPod classic, iPod touch, iPod nano, iPod 5th generation (video), iPod with color display, iPod mini. Load the iPod 1 Push to open the dock compartment. 10 EN 2 Place the iPod in the dock. 3 Start to play the device (see the device user manual). Remove the iPod 1 Pull the iPod out of the dock. Listen to the iPod 1 Ensure that the iPod is loaded correctly. 2 Press SOURCE repeatedly to select iPod source. » The connected iPod plays automatically. • To pause/resume play, press . • To skip to a track, press / . • To search during play, press and hold / , then release to resume normal play. Charge the iPod When the unit is connected to power, the docked iPod begins to charge. Play from an external device You can also listen to an external audio device through this unit. 1 Press SOURCE repeatedly to select MP3 link source. 2 Connect the supplied MP3 link cable to: • the MP3-LINK jack (3.5mm) on the back of the unit. • the headphone jack on an external device. 5 Listen to radio Note • Only FM radio reception is available on this unit. Tune to a radio station Tip • Position the antenna as far as possible from TV, VCR or other radiation source. • For optimal reception, fully extend and adjust the position of the antenna. 1 Press SOURCE repeatedly to select FM tuner. 2 Press and hold TUNING +/- for more than 2 seconds. » The radio tunes to a station with strong reception automatically. 3 Repeat step 2 to tune to more stations. • To tune to a weak station, press TUNING +/- repeatedly until you find optimal reception. Progr...
Dieses Handbuch ist für folgende Modelle:Lautsprecher und Subwoofer - DC190B/37 (926.73 kb)
Lautsprecher und Subwoofer - DC190/37 (926.73 kb)