Stimmen - 4, Durchschnittliche Bewertung: 3.8
(
)
)
|
Anleitung Zusammenfassung
2 After the set amount of time expires, the bar speaker will automatically power off. 1 Press the PoWer button to turn the bar speaker off. 2 Press the cLock button on the remote. The clock will begin to blink. 3 Press the reV/fWd for iPod Min/hr buttons on the remote to adjust the hour and minute. 4 Press the cLock button to finish setting the time. setting the alarm 1 Press the PoWer button to turn the bar speaker off. 2 Press the aLarM button on the remote. The alarm time will begin to blink. 3 Press the reV/fWd for iPod Min/hr buttons on the remote to adjust the hour and minute. 4 Press the source button to select FM or iPod mode for the alarm source. 5 Press the aLarM button to finish setting the alarm time. 6 Once set, the alarm will automatically be activated. Press the aLarM button an additional time, after setting the alarm, to deactivate the alarm. When the text ALARM appears on the display, the alarm is activated. 7 After the alarm sounds, press the PoWer button to turn the alarm off. CUsTOmeR HeLPLINe | 1-314-621-2881 iLive | ITP280B iPhone/iPod and radio docking an iPhone/iPod tuning the fM radio iPhone/iPod and radio docking an iPhone/iPod tuning the fM radio 1 Press the PoWer button to turn the bar speaker on. 2 Press the source button to switch to iPhone/iPod mode. (iPod button on the remote) 3 Press the iPod draWer button to open the MOTORIZED DOCK FOR iPhone/iPod. 4 Locate the numbered bracket that fits the iPhone/iPod model that will be docked. Each included bracket has a number on it, indicating which iPhone/iPod model that bracket is compatible with. See the separate bracket chart page to identify which bracket is needed. 5 Snap the bracket into place over the iPhone/iPod connector in the motorized dock. 6 Connect the iPhone or iPod to the connector inside the Dock for iPhone/iPod. When the speaker is plugged in, using AC power, the docked iPhone or iPod will charge. Playing an iPhone/iPod 1 Follow the instructions for docking an iPhone/iPod. 2 Press the PLay/Pause button to begin playing music from the docked iPhone or iPod. 1 Press the PoWer button to turn the bar speaker on. 2 Press the source button to switch to FM radio mode. 3 Press the skiP/tune buttons on the remote to tune the FM radio. saving a station as a Preset 1 Follow the instructions for TUNING THE FM RADIO. 2 Press the MeM button. 3 Press the Menu uP/doWn for iPod buttons to select a preset. (P01, P02, P03, etc.) 4 After you’ve selected a preset, press the MeM button to save the current FM radio station to the selected preset. tuning to a Preset fM radio station 1 Follow the instructions for TUNING THE FM RADIO. 2 Follow the instructions for SAVING A STATION AS A PRESET. 3 Press the MeMory buttons on the remote to cycle through preset radio stations. iLive | ITP280B aV1, aV2, auXiLiary inPut, Line inPut, and eQ aV1 and aV2 Line input aV1, aV2, auXiLiary inPut, Line inPut, and eQ aV1 and aV2 Line input Requires an 3.5mm audio cable (not included) 1 Connect 3.5mm audio cable to the Line inPut. Connect the other end of the 3.5mm cable to an MP3 player or other audio source. 2 Press the PoWer button to turn the bar speaker on. 3 Press the source button to switch to LINE mode. 4 Use the native controls on the connected device to begin playing audio routed through the bar speaker. Built-in sound technologies Press the eQ button to cycle through the available equalizer settings. srs trusurround Xt® creates a truly immersive surround sound experience with rich bass and clear dialog. srs trusurround Xt® -dialog clarity Mode enhances the vocals so dialog is clear and easy to understand. srs WoW® significantly improves the playback quality of audio, delivering a dynamic 3D entertainment experience with deep, rich bass. Music 2.1 delivers the audio through two of the three speakers and the subwoofer. Music 3.1 delivers the audio through all three of the bar speaker’s speakers and the subwoofer. Requires an RCA audio/video cable (not included) 1 Connect an RCA audio/video cable to the aV1 or aV2 inPuts. Connect the other end of the RCA cable to the audio/video outputs on a DVD player, stereo system, gaming system, etc. 2 Press the PoWer button to turn the bar speaker on. 3 Press the source button to switch to AV1 or AV2 mode. 4 Use the native controls on the connected device to begin playing audio or video routed through the bar speaker. auxiliary input Requires an RCA audio cable (not included) 1 Connect an RCA audio cable to the auXiLiary inPuts. Connect the other end of the RCA cable to the audio outputs on a DVD player, stereo system, gaming system, television, etc. 2 Press the PoWer button to turn the bar speaker on. 3 Press the source button to switch to AUX mode. 4 Use the native controls on the connected device to begin playing audio routed through the bar speaker. CUsTOmeR HeLPLINe | 1-314-621-2881 iLive | ITP280B Basic connectiVity Basic connectiVity Below, you’ll see a basic flow chart of how you can connect your home ent...