Stimmen - 3, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
Use the Tape Measure to decide how high you’d like to hang the bar speaker on the wall. The bar speaker must be hung within 6 feet of an AC power outlet for the attached AC Power Cord to reach. 2. Use the Stud Finder to locate 2 parallel wooden studs to screw the mounting brackets into. 3. Mark the wall at the center of the studs using the pencil. 4. Line the level up on both of your marks to make sure they are level. If they’re not, adjust the marks as needed to make them level. 5. After you’ve double checked your markings, drill through the top hole on both mounting brackets directly into the marks you’ve made on the wall. If you are using the brackets only and no spacers, use the included short screws. If you are using any of the spacers or combination of the spacers, use the long screws. 6. Use the Level to level each of the hanging brackets, then drill the second screw into the bottom hole on both mounting brackets. 7. Slide the bar speaker onto the mounting brackets, and make sure there is a firm and stable connection before letting go of the bar speaker. 8. Finally, use the Level to confirm that the bar speaker is level. studs screws spacer mounting bracket 16” IT209 IT209 CONNECTIVITY Below, you’ll see a basic flow chart of how you can connect your home entertainment devices to the bar speaker, and in turn how the bar speaker connects to them. The following pages contain more detailed instructions on what exactly needs to be done to make these connections. DVD PLAYERDIGITAL CABLE or SATELLITE TUNERVCRGAMING CONSOLESUBWOOFERAUDIO &/Or VIDEOAUDIO &/Or VIDEOVIDEOAUDIOAUDIO CONNECTIVITY --CONNECTING A TELEVISION TO THE BAR SPEAKER When connecting a television to the bar speaker, is outputting the audio from the television to the bar speaker, the bar speaker will provide you with a higher quality audio output than your television. --AUDIO TO THE BAR SPEAKER 1. Connect a Stereo RCA Cable to the Audio Outputs on the television. 2. Connect the other end of the Stereo RCA Cable to the Auxiliary Stereo Inputs on the bar speaker. The volume on your television may need to be adjusted independently of the bar speaker, or adjusted to a fixed audio mode. --S-VIDEO FROM THE BAR SPEAKER 1. Connect an S-Video Cable to the S-Video Input on the television. 2. Connect the other end of the S-Video Cable to the S-Video Output on the bar speaker. The S-Video Output will not output video from a connected DVD Player. The S-Video Output will only output video from a docked iPod. --COMPOSITE VIDEO FROM THE BAR SPEAKER 1. Connect an RCA Video Cable to the Video Input on the television. 2. Connect the other end of the RCA Video Cable to the Video Output on the bar speaker. Example of Television Inputs & Outputs SVIDEO 1SVIDEO 2VIDEO INPUTAV 1AV 2AUDIO INPUTVIDEO INPUTRLAUDIO OUTAUDIO OUTPUTRL Diagram of the IT209’s Inputs & Outputs iPod Only CONNECTIVITY --CONNECTING A DVD PLAYER TO THE BAR SPEAKER When connecting a DVD Player to the bar speaker, outputting the audio from the device to the bar speaker, and outputting video from the device either directly to the television or to the television through the bar speaker. These instructions will show you how to connect the device to the television by going through the bar speaker --AUDIO 1. Connect a Stereo RCA Cable to the Audio Outputs on the device. 2. Connect the other end of the Stereo RCA Cable to the AV 1 R and AV1 L Stereo Inputs on the bar speaker. --COMPOSITE VIDEO 1. Connect an RCA Video Cable to the Video Output on the DVD Player. 2. Connect the other end of the RCA Video Cable to the Video Input on the bar speaker. The bar speaker itself has no video display. In order to view video from a connected DVD Player, the bar speaker must be connected to a television. The S-Video Output will not output video from a connected DVD Player. The S-Video Output will only output video from a docked iPod. Example of DVD Player Outputs AV OUTPUTAUDIOVIDEORLSVIDEO 1VIDEO Diagram of the IT209’s Inputs & Outputs SPECIAL NOTE: A Digital Cable or Satellite Tuner, Set-Top Box, Gaming Console, or VCR can be connected to the bar speaker in the same way that a DVD Player is connected. IPOD OPERATIONS --DOCKING AN IPOD 1. Locate the numbered bracket that fits the iPod that will be docked. Each included Bracket has a number on it, indicating which iPod model that bracket is compatible with. • See the separate bracket chart page to identify which bracket is needed. 2. Press the Power Button to turn the bar speaker on. 3. Press the Source Button to switch to iPod Mode. 4. Press the iPod Drawer Button on the left side of the unit to open the motorized dock for iPod. 5. Snap the bracket into place over the iPod Connector in the dock. 6. Connect the iPod to the iPod Connector inside the dock. When the bar speaker is plugged in, using AC power, the docked iPod will charge. --PLAYING AN IPOD 1. Follow the Steps for Docking an iPod. 2. After the iPod is docked, the bar speaker is powered on, and the bar sp...