Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
To stop play, press 9. To pause play, press 11.To resume play, press again. To search for a particular point during playback, ket?p *H or -pressed and release it at the desired point. To skip to the beginning of a track during plalyback, press +4 or a> repeatedly or turn MULTI JOG. To remove discs, press A OPEN/CLO$E. To start play when the power is off (Direct Pli~y Function) Press CD. The power is turned on and play of the loaded disc(s) begins. When A OPEN/CLOSE is pressed, the power is also turned on and the disc compartment is opened, To check the remaining time During play, press CD EDIT/CHECK, The amount c)f time remaining until all tracks finish playing is displayf?d. To restore the playing time display, repeat the abow?. Selecting a track with the remote control 1 Press DISC DIRECT PLAY, then press numbered buttons 13 within 3 seconds to select a disc. 2 Press numbered buttons O-9 and +10to select a track. Example: To select the 25th track, press +10, +110and 5. To select the 10th track, press +10 and O. The selected track starts to play and continues to the end of that disc. Replacing discs during play While one disc is playing, the other discs can be replaced without interrupting play. 1 Press DISC CHANGE. 2 Remove the discs and replace with other discs 3 Press A OPEN/CLOSE to close the dlisc compartment. When loading an 8-cm (3-inch) disc, put it onto thle inner circle of the tray. * Do not place more than one compact disc on om? disc tray. . Do not tilt the unit with discs loaded, Doing so may cause malfunctions. o Do not use irregular shalpe CDs (example: h(?art-shaped, octagonal ones), It may result in malfunctions. 18 ENGLISH Use the remote control, RANDOM play All the tracks on the selected disc or all the discs can be played randomly. REPEAT play A single disc or all the discs can be played repeatedly. Press RANDOM/REPEAT. Each time it is pressed, the function can be selected cyclically. RANDOM play — RANDOM lights up on the display. REPEAT play — ~ lights up on the display. RANDOM/REPEAT play — RANDOM and C& light upon the display. Cancel — RANDOM and G disappear from the display. To dav all discs, press ~> to start play, To play a single disc, press DISC DIRECT PLAY, then press numbered buttons 1-3 to start play. m During random play it is not possible to skip to the previously played track with 4+. BLANK SKIP PLAY The silent portions between tracks recorded on a CD can be skipped during playback. 1 Press CD BLANK SKIP. “CD BLANK SKIP ON” is displayed and a small dot appears in the display. 2 Press <› to start playback. The silent portions between tracks will be skipped, and the sound will be played back without interruption. If a track fades out (ends with the sound gradually decreasing), the fadeout portion also will be skipped. To return to normal playback Press CD BLANK SKIP again, and “CD BLANK SKIP OFF is displayed and the dot in the display disappears. . There may be a case where BLANK SKIP PLAY does not function correctly. BLANK SKIP PLAY is automatically canceled when performing Al EDIT RECORDING (page 22), PROGRAMMED EDIT RECORDING (page 23), or recording during PROGRAMMED PLAY (page 19) or RANDOM PLAY (page 19). [Jp to 30 tracks can be programmed from any of the inserted discs. ~ 1 2,3 2 5 +4 w Iuse the remotecontrol. 1 Press PRGM twice in stop mode. “PRGM” is displayed PRGM When PRGM is pressed once in step 1, the unit enters the KARAOKE PROGRAM (page 25). 2 Press DISC DIRECT PLAY, then press 1-3 within 3 seconds to select a disc. Go to the next step when the tray stops rotating. 3 Press numbered buttons O-9 and +10 to program a track. Example: To select the 25th track, press +10, +10 and 5. To select the 10th track, press +1O and O. Selected track number Total number of selected tracks of the’ se’lec{ed tracks 4 Repeat steps 2 and 3 to program other tracks. 5 Press 4P to start play. To check the program Each time ~ or ~ is pressed in stop mode, a disc number, track number, and program number will be displayed. To clear the program Press n CLEAR in stop mode, To add tracks to the program Repeat steps 2 and 3 in stop mode. The track will be programmed after the last track. To change the programmed tracks Clear the program and repeat all the steps again. To play the programmed tracks repeatedly After programming the tracks, press RANDOM/REPEAT repeatedly until ~ appears on the display. m During programmed play, you cannot perform random play, check the remaining time, and select a disc or track. “Can’t USE is displayed if you attempt to select a track. . “FULL’ is displayed if you attempt to program more than 30 tracks. ENGLISH I 9 This section explains how to record from the tuner, CD player, or external equipment. 5 1 1. 2— *’----‘--”------““----y L.,. ----.-_ a1 Preparation Use Type I (normal) and Type II (high/CrOz) tapes for recording. Set the tape to the point where recording will start. 1 Insert the tape to be recorded on into deck 2. Insert the tape with the side to be ...