Stimmen - 1, Durchschnittliche Bewertung: 3
(
)
)
|
Anleitung Zusammenfassung
If you have questions when installing and using your wa ter filter housing call this toll- free number... 1-800-426-9345 (M-F,7 am -8pm, CST) For repair or replacement parts, call this toll-free number... 1-800-366-7278 See back cover for other Sears service numbers. SAVE THIS MANUAL DELUXE MULTI-PURPOSE WATER FILTER HOUSING • Safety Guides • Installation • Operation • Cartridge Replacement • Repair Parts Sears, Roebuck and Co., Hoffman Estates, IL 60179 USA 7228798 (Rev, E 5/10/05) SAFETY GUIDES / SPECIFICATIONS • Please read this entire manual before cartridge will not purify water, or make it safe installing and using your deluxe to drink. DO NOT use on HOT water (100°F, multi-purpose water filter housing. Be sure to max.). Do not use with water that is follow all guides and steps carefully. Failure to microbiologically unsafe or of unknown follow them could cause personal injury or quality without adequate disinfection before property damage. or after the system. • Protect the water filter housing and piping • Check with your local public works from freezing. Water freezing in the housing department for plumbing codes. You must will break it. follow their guides as you install the water filter housing. In Massachusetts, plumbing • Your deluxe multi-purpose water filter codes of Massachusetts shall be adhered to. housing works on water pressures of 40 psi Consult with your licensed plumber. (minimum) to 100 psi (maximum). If your house pressure is over the maximum, install a • Use the filter on a potable, safe-to-drink, pressure reducing valve in the water supply home COLD water supply only. The filter pipe to the water filter. Min. -Max. Supply Water Pressure 40 -100 psi Min. -Max. Supply Water Temperature 40 -100 °F Inlet -Outlet Thread Size 3/4" NPT N WARRANTY FULL ONE YEAR WARRANTY ON DELUXE MULTI-PURPOSE WATER FILTER HOUSING For one year from the date of purchase, Sears will replace this Deluxe Multi-Purpose Water Filter Housing, (except filter cartridge, which is purchased separately), free of charge, if defective in material or workmanship. WARRANTY IS AVAILABLE BY SIMPLY RETURNING THE DELUXE MULTI-PURPOSE WATER FILTER HOUSING TO THE NEAREST SEARS STORE THROUGHOUT THE UNITED STATES. This warranty gives you specific legal rights, and you may have other rights which vary from state to state. Sears, Roebuck and Co., DEPT. 817 WA, Hoffman Estates, IL 60179 TABLE OF CONTENTS Planning Installation ............................................. 3-4 Typical Installation Drawings / Tools and Materials Needed .......... 4 Water Filter Housing Installation .................................. 5-7 Filtering All House Water ...................................... 5 -6 Using Compression Fittings .................................. 5 Using Soldered Copper ...................................... 5 Using Threaded Fittings ..................................... 6 Filtering Water To One Faucet (Installing Under Sink) ............. 7 Installing Filter Cartridge ...................................... 7 Filter Cartridge Life / Replacement ................................ 8 -9 Repair Parts .................................................... 11 PLANNING YOUR INSTALLATION When planning your installation, first read the filter and nominal size (1/2", 3/4" etc.) cartridge information on page 8, and decide where _-" tools you have and your plumbing skills to locate the water filter housing. Then use the draw _" cost of materials needed ings on page 4 to guide you. There are many variables to consider as you plan. Some of these are: _" space available for installing the filter housing _" the water filter housing inlet and outlet internal Make a simple sketch of your proposed installation threads are 3/4" NPT. and a list of plumbing materials you will need. Obtain everything you need before starting the installa_-" existing plumbing type (copper, threaded, etc.) tion. Be sure you have the tools required. TYPICAL INSTALLATIONS / TOOLS AND MATERIALS NEEDED INSTALLATION ON COPPER PLUMBING apply several wraps of Teflon tape optional shutoff valve INLET 3/4" NPT WATER IN Note: Be sure to allow a minimum space of 1-1/2" under the filter for removing the sump, to change the cartridge. SOLDERED COPPER INSTALLATION (OBSERVE FIG. 1 NOTES) IN i/}J WATER optional shutoff valve 3/4" copper pipe, as req'd. -MATERIALS AND TOOLS NEEDED ( see page 5) THREADED INSTALLATION (OBSERVE FIG. 1 NOTES) 3/4" nipple optional shutoff valve USING COMPRESSION FITTINGS FILTERED WATER nut brass ferrule compression adaptor -MATERIALS AND TOOLS NEEDED I_ 2 compression adaptors, 3/4" NPT x comp. (compression end to fit existing copper pipe) I_ Teflon tape I_ tubing cutter I_ sandpaper or emery-cloth I_ 2 wrenches, either open end or adjustable jaw, size to fit compression adaptors adaptor, ....... 3/4" NPT x sweat (apply several wraps of Teflon tape to threads) 3/4" hex nipple (2) union fitting (2) / 3/4" pipe, as required -MATERIALS AND TOOLS NE...