Stimmen - 3, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
Do not remove the ashes until they are completely and fully extinguished. Do not place fuel (charcoal briquets, wood or lump charcoal) directly into bottom of grill. Place fuel only on the charcoal pan/grid. Check to make sure the air vents are free of debris and ash before and while you are using the grill. Make sure ash catcher is securely and completely in place before using the grill. Always wear protective gloves when adding fuel to retain desired heat level. Keep all electrical cords away from a hot grill. Always use a meat thermometer to ensure food is cooked to a safe temperature. Never cover entire cooking area with aluminum foil. Please use protective gloves when assembling this product. Do not force parts together as this can result in personal injury or damage to the product. Deaths, serious injury or damage to property may occur if the above is not followed exactly. page no. Exploded View Parts List 1 Branding Plate 55-08-045 2 Lid Handle 55-08-255 3 Lid Air Vent Handle 55-08-318 4 Lid Air Vent 55-08-319 5 Lid 55-08-320 6 Warming Rack 55-08-321 7 Cooking Grid 55-08-322 8 Top Hinges (2) 55-08-323 9 Charcoal Grid 55-08-324 10 Bottom Hinges (2) 55-08-325 11 Bottom Bowl 55-08-326 12 Left Side Handle 55-08-327 13 Right Side Handle 55-08-328 14 Legs (2) 55-08-329 15 Ash Tray 55-08-330 16 Locks (2) 55-08-331 1 3 2 4 5 6 7 8 9 10 11 12 13 14 15 14 16 Hardware A Screw M4x10 Zinc Plated Phillips Truss Head 4 pcs B Screw M5x12 Zinc Plated Phillips Truss Head 13 pcs C Screw M6x8 Zinc Plated Phillips Truss Head 8 pcs D Wing Nut M4 Steel 4 pcs E Wing Nut M5 Steel 18 pcs F Washer o4 Zinc Plated 4 pcs G Washer o5 Zinc Plated 8 pcs H Washer o6 Heat Resistant 2 pcs I Lock Washer o4 Zinc Plated 4 pcs J Lock Washer o5 Zinc Plated 8 pcs K Pin o5 x 30 Black Coated 2 pcs L Cotter Pin o1.4 x 30 Zinc Plated 2 pcs Tools Required for Assembly (Included) #2 Phillips Head Screwdriver 2 Attach Branding Plate Ex 2 1 DO NOT RETURN PRODUCT TO STORE. For assistance call 1.800.762.1142 toll free. Please have your owner’s manual and model number available for reference. For Easiest Assembly: • To avoid losing any small components or hardware, assemble your product on a hard level surface that does not have cracks or openings. • Clear an area large enough to layout all components and hardware. • When applicable, tighten all hardware connections by hand first. Once the step is completed go back and fully tighten all hardware. • Follow all steps in order to properly assemble your product. To operate you will need: • (1) Bag of charcoal (not included) Note: You must follow all steps to properly assemble grill. Estimated Assembly Time: Approximately 30 minutes. 3 Attach Lid Handle Ex 2 Gx 2 Hx 2 Jx 2 4 Attach Air Vent and Vent Knob B x 1 Ex 2 Assembly Instructions 6 Attach Bottom Hinges B x 4 Ex 4 Gx 4 Jx 4 5 Attach Top Hinges B x 2 Ex 2 Gx 2 Jx 2 8 Assemble Legs C x 8 7 Attach Locks A x 4 D x 4 Fx 4 Ix 4 Assembly Instructions (continued) 10 Attach Lid Kx 2 Lx 2 9 Attach Legs B x 6 Ex 6 12 Insert Charcoal Grid and Cooking Grid 11 Insert Warming Rack Operating Instructions This appliance is designed for use with only quality charcoal briquets, lump charcoal and cooking wood. First Use 1. Make sure all labels, packaging and protective films have been removed from the grill. 2. Remove manufacturing oils before cooking on this grill for the first time, by operating the grill for at least 15 minutes with the lid closed. This will “heat clean” the internal parts and dissipate odors. CAUTION: Instant light charcoal can burn at very high temperatures during initial startup. Make sure lid is open until charcoal turns to hot coals. Lighting 1. Open lid and vents. 2. Make sure ash receiver is empty and secure. 3. Remove cooking grid. 4. Arrange and light fuel per instructions on fuel package. 5. Allow fuel time to ash into glowing coals before cooking. Direct Cooking Cooking directly over hot coals. Ideal for searing in juices and grilling food requiring less than 25 minutes of grilling time, such as steaks, hamburgers, hot dogs, chicken parts, vegetables and fruit. 1. Open lid and remove cooking grid. 2. Load and light charcoal per charcoal manufacturer’s instructions. Leave lid open. 3. While wearing protective gloves, carefully spread hot coals evenly across charcoal grid with a long-handled tool. 4. While wearing protective gloves replace cooking grid, close lid and allow grill to preheat. 5. While wearing protective gloves open lid and place food onto cooking grids above the hot coals with long-handle tongs. 6. With lid open or closed, cook until desired internal food temperatures are achieved. Note: If additional briquettes are needed, remove food from cooking grid, and while wearing protective gloves remove the cooking grid and place additional briquettes without disturbing the hot coals. Carefully replace cooking grid and food. 7. Allow charcoal to burn out by closing lid and all vents. Except in the case of an emergency, do NOT pour wat...