. Know the tool. Read and understand the operator’s manual and observe the warnings and instruction labels affixed to the tool. . Do not allow children or untrained individuals to use this unit. . Wear safety glasses or goggles that are marked to comply with ANSI Z87.1 standard and hearing protection when operating this unit. . Wear heavy long pants, a long-sleeved shirt, boots, and gloves. Do not wear loose fitting clothing, short pants, jewelry of any kind, or go barefoot. . Secure long hair s

WARNING: To prevent accidental starting that could cause serious personal injury, always remove the battery pack from the tool when assembling parts. WARNING: Blades are sharp. When installing and removing the blade, wear non-slip, heavy-duty protective gloves. Do not place your hand or fingers in any position where they could get cut. NEVER touch the blade or service the unit with the battery pack installed. Fig. 3 HEX KEY HEX KEY STORAGE POSITIONING PIN HOLE MOUNTING CLAMP PIN MOUNTING CLAMP 9

If “L” low needle can not be turned anticlockwise, do not force plastic limiter caps. Contact a servicing dealer. See Figure 25. Engine does not reach full speed and emits excessive smoke: 1. Check oil fuel mixture. 2. Air filter dirty. 3. Carburettor requires adjustment. 1. Use fresh fuel and the correct 2-cycle oil mix. 2. Clean air filter. Refer to “Replacing and Cleaning Air Filter” earlier in this manual. 3. Turn “H” needle clockwise 1/16 - 1/8 turn. See Figure25. Engine starts, runs, and a

42.5 cm3 Cutting swath .......................................................................................................................................................... 457 mm Engine displacement ................................................................................................................................................ 30 cm3 Maximum engine performance (in accordance with ISO 8893) ............................................................................... 0.78 k

Properly cared for, it will give you years of rugged, trouble-free performance. WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual. Thank you for buying a Ryobi trimmer. SAVE THIS MANUAL FOR FUTURE REFERENCE TABLE OF CONTENTS TABLE OF CONTENTS ¦ ¦¦¦¦¦ Safety..................................................................................................................................................................... 2 -3 ¦ ¦¦¦¦¦ Symbols............

Install the spool retainer and turn anticlockwise to tighten securely. BLADE GUARD BLADE CUPPED WASHER BLADE NUT HOLDING PIN Fig. 10 SPANNER (13 mm) UPPER FLANGE WASHER GEAR HEAD 11 OPERATION OPERATION FUEL AND REFUELLING HANDLING THE FUEL SAFELY ¦ ¦¦¦¦¦Always handle fuel with care. It is highly flammable. ¦ ¦¦¦¦¦Always refuel outdoors where there are no sparks and flames. Do not inhale fuel vapour. ¦ ¦¦¦¦¦Do not let petrol or oil come in contact with your skin. ¦ ¦¦¦¦¦Keep petrol and oil away f

6 • Assembly ...................................................................................................................................................................6-8 • Operation ...................................................................................................................................................................8-9 • Maintenance ...............................................................................................................................

RY52004A The model number will be found on a plate attached to the engine housing. Always mention the model number in all correspondence regarding your GAS PRUNER or when ordering replacement parts. KEY PART NO. NUMBER 1 82589 2 985382001 3 PS06258 4 PS06259 5 PS01718 6 986174001 7 985384003 8 PS05266 9 985835001 10 PS02155 11 944701 12 985744001 13 82496 14 82278 15 00422 16 84004 17 81242 18 83009 19 A08130 20 07255 21 09207 22 PS02764 23 PS02227 24 985157001 25 983

2 – English Symbols SYMBOL EXPLANATION WARNING! Clearing saws, brushcutters and trimmers can be dangerous! Careless or incorrect use can result in serious or fatal injury to the operator or others. Read through the Operator‘s Manual carefully and understand the content before using the machine. • Use anti-slip and stable boots. • Always wear approved protective gloves. • Only use non-metallic, flexible cutting elements, that is trimmer Always use head with trimmer cord. • A protective helmet whe

When properly cared for, it will give you years of rugged, trouble-free performance. WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using this product. Thank you for your purchase. SAVE THIS MANUAL FOR FUTURE REFERENCE Su nuevo accesorio para cultivar ha sido disenado y fabricado de conformidad con estrictas normas de calidad para brindar fiabilidad, facilidad de uso y seguridad para el operador. Con el debido cuidado, le brindara muchos ano